Jump to content
SAU Community

Recommended Posts

Ok guys I'm moving to Townsville and I can't take all this stuff with me so I'm selling it off cheap. I can't believe how much stuff I've managed to horde!

Anyway the prices listed are what I want but if you can't afford to pay the amount make me an offer and if no one else buys it, its yours. I think you'll find the prices are pretty reasonable anyway. I'm in Newcastle so if you need anything sent it's no problem.

Ok here we go

Item#1

Alpine 9835 Stereo Head Unit + Remote: $375

I bought this in Jan05 and it was an awesome head unit. Paid $700 for it when the RRP was $1199 and used it in my TT until I sold her in March/April. I was going to use it in my new ride but it already had a decent stereo, so its been in my Cupboard ever since! what a waste eh

stereo1.jpg

Item#2

Clarion SRW2541 10'' Single Voice Coil Subwoofer in Box - $40

This came out of my first Supra. I bought it pre-assembled in box for an amount I can't remember. It always sounded good and by chance its the perfect height to slip in place un the lip of the back seat in the boot.

sub%20box1.jpg

Item #3

Supra Body & Engine Repair Manuals - $50

These could be worth alot more - I have no idea. These are the factory repair manuals with everything you'd ever want to know about the engine and body etc. They're both absolutely massive.

supramanuals.jpg

Item#4

Supra Rear Window Shade / Visor - $90

I've had this up for sale twice before and had plenty of interest but no buyers. Anyway I advertising it before for $200 and as I said I just need this stuff gone so $90 is the new price. These look friggin awesome on MKIV's IMO.

visor1.jpg

Item#5

Supra Front Strut Brace - $50

I bought this for my TT and it made a huge difference to the handling. I took it off before I sold the car to make the engine bay look more stock. It bolts straight on in about 2 mins. Even I could install this part without help!

SupraStrutBrace.jpg

Item#6

Stock Airbox Upper Air Intake - $10

This is off my stock airbox in the TT and is used to direct air from under the bonnet into the airbox.

Topairboxintake.jpg

Item #7

Stock Airbox Lower Air Intake - $10

This is off my stock airbox in the TT and is used to direct air from under the headlight into the airbox.

LowerAirboxintake.jpg

Item#8

Momo Millennium Steering Wheel + Boss Kit - $300

I bought this originally for my 1st Supra and it cost me an arm and both legs. They sell now for 400ish + 100 odd for a Boss kit. I used mine for about 6 months before selling the car and it's an absoluetely beautiful wheel of very high quality. I'd love to use it on my new car but because of the airbags I can't. I also can't take it with me so its gotta sell!

Category: STEERING WHEEL

Manufacturer: MOMO, Millenium 350mm

Finish: Leather

Size: 350mm

Product description:

A cutting edge all black leather steering wheel with a brushed metal centre plate and a black leather horn button pad framed by a polished metal ring. 4 polished metal rings cut into the wheel at 2, 5, 7 & 10 o'clock giving this steering wheel a cutting edge modern look.

MOMOWheel1.jpg

MOMOWheel4.jpg

Item#9

Toyota Supra MKIV Single DIN Pocket - $15

I got absoluetely raped to the tune of $50!!! for this friggin thing and I never even used it! Basically its the pocket for underneath your single DIN stereo. Most installers put one in when they install your head unit but I had a mate put mine in so I had to pay retail for it. Product is still bagged and is as new.

StereoDinPocket.jpg

Item#10

AUDIOBAHN ABF24T - 4" 2-WAY KEVLAR - $60

I paid a fortune for these speakers because I wanted the best sound I could get out of the stock door locations in the MKIV. I don't know if they are still the best money can buy but they are certainly a good set of speakers. I had them in for about 3 months with the Alpine Headunit and they sounded great.

speakers1.jpg

Item#11

MOMO F-16 Gear Knob - $50

I got this gear knob at the same time as my Millenium Steering Wheel. They look great together and the stitching on both is top notch. I only had them on for about 6 months so they are as new without any wear to speak of. These knob still sell today for over $100

A sharp aluminium gear knob with a colored leather hand grip with black top stitching.

Precision crafted in Italy using only the finest materials, MOMO gear knobs are designed to last and offer a perfectly weighted feel for precise shifting. Each MOMO gear knob is engineered and tested to provide a comfortable grip for any size hand.

MomoKnob.jpg

Item#12

Clarion APX400-2 Amplifier - $90

I used this AMP to run my Clarion Sub System in my 1st Supra. I only ran it for about 6 months before I sold the car.

Maximum Power Output 260 W (65 W x 4) specs at 12 Volts

Continuous Average Power Output 160 W (40 W x 4 into 4 ohms 20Hz-20kHz @ 0.08% THD)

Typical 2-ohm Stereo 65 W x 4 @ 0.8% THD

Typical Bridged Power 120 W x 2 @ 0.8% THD

Bass Extender Control 0-12dB

Adjustable 4-Channel 50Hz-200Hz, 12dB/oct. High/Low Pass Crossover

Mixed-Mode Operation

Bridgeable 4-, 3-, or 2-Channel Operation

Pulse-Width Regulated MOSFET Power Supply

Speaker Level Inputs

amp1.jpg

Item#13

Mitsubishi Evo Rear Boot Relfectors / Garnish - $150

I bought these before I took delivery on my Evo TME. By the time the car arrived I was more interested in fanging it then installing reflectors so I never used them. They are as new in box as bought from Japan. I think I paid about $250 for them but now I just want them sold

EvoReflectors.jpg

Item#15

Supra Passgenger Seat Plastic ECU Cover - Free to a good home

I took this out of my TT(can't remember why) but it covers and protects the ECU and other eletrical crap from the passengers feet. Like everything else I don't need it any more and I'd sooner give it away than chuck it away!

Thats all the stuff I can think of right now.

Please PM me enquiries and I'll get back to you as quickly as possible

Thanks for looking

Rob.

Link to comment
https://www.sau.com.au/forums/topic/101022-rsea-garage-sale-cleanout/
Share on other sites

As far as I'm aware the APX400.2 is only a 2 channel amplifier, not a 4 channel as described in your original post. If it was a 4 channel, I would have taken it off your hands straight away. Still a great amplifier and awesome price you are asking for it.

Correct specifications for the APX400.2 should be:

- Maximum Power Output 380 W.

- Continuous Average Power Output 200 W (100 W x 2 into 4 ohm 20Hz-20KHz @ 0.05% THD).

- Typical 2-ohm Stereo 190 W x 2 @ 0.5% THD 1Khz.

- Typical Bridged Power 1 KHz 280 W @ 0.5% THD.

- Bass Extender Control 0~18dB @ 45Hz.

- Adjustable 55Hz-5.5KHz, 12dB/oct. High/Low Pass Crossover.

- Mixed-Mode Operation.

- Bridgeable 2/1 Channel Operation.

- MOSFET Power Supply.

- Speaker Level Inputs.

- Double-Sided Glass Epoxy PC Board.

Nath

Edited by NathR32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Incidentally, I also put v3 of the tune on the car and did an oil change from 5w20 to 5w40 to see how it affected oil pressure in the mid to high end. I'm still happier with the thicker oil and will stick with it, but clearly the system is happy with 55psi even if I'm not!
    • So the other thing I got sorted over the weekend was Z1 oil catch can install. https://www.z1motorsports.com/z1-products/z1-motorsports/z1-q50-q60-30t-baffled-oil-catch-can-kit-p-23546.html It was a good kit, most importantly it came with preformed silicone hoses in the right shapes rather than trying to bend/join regular straight rubber hose. It did come with crappy spring clamps not proper hose clamps so I ditched them On the down side, it is made for LHD cars and RHD cars have the main ECU harness running straight through that location, I ended up bending 2 mounting brackets so the loom is up against the brake master cylinder compartment wall to make room for it....otherwise everything fit without modification Intercoolers off on both sides, but there was enough room to get everything done without disconnecting (and therefore having to re-bleed) the coolant lines. Each is mounted with 4x 12mm headed bolts, plus in and out side hose clamps (7mm headed, nice) and 3 electrical connectors on the navigator's side which were a real pain to undo (probably for the first time in 13 years).   Also one of the mounting bolts on the driver's side was cross threaded, thanks Infiniti/Nissan workshop mechanics. On the navigator's side, the catch can plumbs into the factory hose that goes from the cam cover PCV back to the intake.  This is the 2 new hoses in place. All simples and direct fit On driver's side, there is a bracket provided that mounts to the throttle body, they even provide slightly longer bolts to allow for the bracket thickness which is nice (although, they don't have captive washers like the factory bolts of course) In that pic the main loom brackets are not in place, once I had "adjusted" them across it now sits up against the panel and just clears the OCC The remaining problem with this is emptying it; currently you have to remove the 3x m4 bolts that hold it to the bracket and both banjos to remove it (probably dropping the banjo washers at the same time) pull it apart to empty then replace. I do have some fittings coming for a remote drain from underneath that will also add a little capacity...it is very small and will need to be emptied every oil change to be sure.
    • Noise sounds to me could be either wheel bearing related (have had similar from bearings going) or that tail shaft is still loose. Or something like a heat shield touching the tail shaft.
    • You wouldn't get away with saying the opposite, if you were there.
    • Do some wool fluff testing on the vents
×
×
  • Create New...