Jump to content
SAU Community

Getting Wheels Re-coated/repaired

jmac

By jmac,
in Queensland

 Share

Recommended Posts

pear Mentor

pear

Posted
Posted
I second Chris as well. Yes he' still there and I've used him before. He's even got a write up in the current issue of HPI, go have a read. Depending on the damage repair work starts at around $40 per rim.  He has the ability to bring your wheels up to brand new condition...if I had Nismo's I'd definately spend the $$.

3rd... I was at Chris's place today.

Good service!! and I was very happy with the price.

and he didn't know I had a skyline :unsure:

MountainRunner Mentor

MountainRunner

Posted
Posted

My wheels were gutter damaged when I got my car. A few nasty chips on the outer edge and a line through one of the spokes. Anyway I got them powder coated at the place in Sumner Park. They fixed all the damage and coated them all for about $200. That was about a year ago and I have had no problems and they are easy to clean.

Del Sol Enthusiast

Del Sol

Posted
Posted

My rims were painted in 2 pack when they were on my old car, and now they are powdercoated. The powdercoating is wearing better than the 2 pack. With the 2 pack the rear rims got alot of stone chips on them, but not with the powdercoat. Powdercoating is also a much quicker process, and cost me less. The only reason I would go 2 pack is if you wanted a colour that does not come in powdercoat.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • jtha7
      Replacing turbo water line - any recommendations or advice?

      By jtha7 · Posted

      Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • MBS206
      RB20DE NEO smallbox clutch.

      By MBS206 · Posted

      From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • MBS206
      Lock up the old for sale / wtb threads.

      By MBS206 · Posted

      That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      I hope that is not something that bad. From what i remember he said that only first gear is "hard" to get in and that he has couple of ideas what to try next but idk 😕  hope it is not gearbox out. I will let you know.
    • GTSBoy
      RB20DE NEO smallbox clutch.

      By GTSBoy · Posted

      If it's not the hydraulics, it is probably gearbox back out. Usually as per @Duncan's post, or otherwise associated with not getting the throwout fork positioned correctly. All the way up to catastrophically bolting shit back together without it being aligned properly and wrecking the clutch/input shaft/flywheel/something else.
×
×
  • Create New...