Jump to content
SAU Community

Recommended Posts

is that a custom made back wall yeah? the factory 1 is too weak to hold amps?

any 1 got any ideas for somone with a strut brace...2 amps, and a 12" sub?

yep it is..

its made from MDF.. with the carpet type material covreing it.

Well.. that's exactly what i'm planning to build!

Dezz.. that should work for you. The back part has enough surface area to hold two amps. I'm going to make a hole on the right-hand side to fit the sub. With the strut-brace, it won't hold a 12", but i'm looking for 10" atm.

gw d00dz!

ill be boxing the 12" and putting it in the boot probably off to the side. the factory wall wont hold 2 amps from what ive been told. im not going to take off my strut brace though, so id either have to work out a way to put a fake wall over the factory 1 while keeping the strut brace, or do a false floor and have the amps under it...

dezz do what i did, rip out the side flooring stuff and build a box (up to the manufactures requirements) and fit it in the corner/s (if you have 2 12" like me)

then put the amps in an amp rack on the right side of the battery, then put the divider back in and hey presto!

i'll get some pics for ya soonly

wellat the moment.. zip ties :D... LOL! but back when that photo was taken i used the factory wall mount to secure the new wall.. although after several months and some heavy cornering.. the facotry wall mount snapped.. so i dont advise using this.. especially if you have heavy amps lol

but at the moment im working on making brackets for it to screw into the roof of the boot like the pics above posted by d00dz i think it was

even with my setup, i still have enough room in the boot to put a large rectangular bag to go away somewhere ... so its still fairly roomy (considering how much was there to begin with.. also my sub can be removed in under 10 seconds... so if i need the space its no big deal!

What ever you do, don't mount the amp onto the sub box as when you get those deep bass beats you'll rattle the internals out of the amp. If your looking to mount it somewhere to keep the max boot space and keeping the look sleek mount it under the front seat(passengers side).

What ever you do, don't mount the amp onto the sub box as when you get those deep bass beats you'll rattle the internals out of the amp. If your looking to mount it somewhere to keep the max boot space and keeping the look sleek mount it under the front seat(passengers side).

Not entirely a problem these days. Amps are built pretty well and you'll get vibrations anywhere it goes simply from driving the car.

Well.. I made the battery-cover idea that I had illustrated earlier.

Used 1200x600x12 MDF. Trimmed it down to size, cut off the angle piece, got some 90 degree brackets and bent them to something like 20 degrees, reattached the angled piece, drilled out the bolt-holes and it fits.

Only problem now is either spot-welding the nuts to the back of the stock mounts or working out some other way of bolting/unbolting the damn thing.

The bottom sits perfectly on my spare tyre, nice and tight... so hopefully it won't vibrate against the metal anywhere.

I've also drawn the line of the strut brace and the floor of the battery-area, and now i'm going to measure that distance up and see what sort of sub I can squeeze in there based on it's magnet size.

Then hole-cutting and carpeting. *phew* And this is after a 12 hour nightshift with no sleep!

I love my skyline but I have just bought a pretty decent stereo. Whats someones thoughts on what it will sound like?

It consists of, top of the range rockford fosgate head unit, 2nd from the best kicker splits in the front, top of the range pioneer 6x9's (the yellow kevlar ones) and a jbl amp which is 110watts rms per channel. Is this a good match up? looking forwared to driving down to sydney with this cranked

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...