Jump to content
SAU Community

Recommended Posts

but that was not the question....

you are correct though...a street/drag/circuit GTR is great with 2x HKS 2530's

its the best all round turbo for the RB26...

this is only my opinion...

My opinion too.

Since he already has all the stuff for GTSS's, the 2530's was an easy answer.

:O cheers :)

Edited by Sydneykid
the power the t04z is gonna make (potentially) is gonna go past the stock rods limits i would imagine (or didn you put betters ones in there Nick?)

Shouldnt be a problem if the rod bolts are replaced with something decent and your not revving the crap out of it. The achillies heel of the conrods isnt the rod itself but the bolts. Put a set of ARP bolts in, and you will be pretty hard pressed to bend them.

Nick what would you call your target rwhp or awkw etc ? as there might be other alternatives to your GT-SS HKS that will deliver better responce and drivable than something the size of a T04Z. I personally would only recommend a turbo that size if your chancing 440 to 450rwkw anything much under that i believe you can be better served with a different combo.

pete

Nick...I'm with Tommy. I hav compared the response of my car to one with a T04z with a 0.81 housing, and the GTRS's spool up a little earlier and make similar power at the same boost level. I know they are different cars and there are a lot of variables, but the bottom line is whether or not it is worth the hassle and expense of going for a single and external gate.

The big Tomei lowmounted twins are another option that would be interesting, or even a pair of Apexi turbines.

Hope this doesn't offend any of the twin guys, seems to me that the single turbo cars have ran the times at the drags

Whats anyone on this forum done time wise with GT-RS?

hows 10.38 from a smaller set of 2530hks grab you, name me a t04z that got close to that and on GT-RS i only know of one guy run them hard on the strip i believe he ran a 10 with them (it's hard to judge a combo on 1/4 times when nones really push them hard down there but i believe in the near future there a gtr that could change all that in wa)

the other little fact i would like to bring to people attention is

2530 rated at 640hp

t04z rated at ?800hp

efficience and ease of install lives with the twins as a bolt on combo

the other little fact i would like to bring to people attention is

2530 rated at 640hp

t04z rated at ?800hp

efficience and ease of install lives with the twins as a bolt on combo

What are the gtrs rated at?

hows 10.38 from a smaller set of 2530hks grab you, name me a t04z that got close to that

And on the flip side name me a GT-RS GTR in Australia thats got close to that aswell?

Im 99% sure we will find the times ran from TO4Z and GT-RS are pretty much the same

hows 10.38 from a smaller set of 2530hks grab you

That wasnt run on pump fuel was it? The cars been comprehensively stripped too hasnt it? So it doesnt really have anything to do with what Blitz is after...

I currently have HKS 2530's on mine and they have been awesome turbos, but to make those numbers you really do have to flog the shit out of them. The T04Z will make the alot easier at the end of the day (albeit though, probably a bit laggier).

That wasnt run on pump fuel was it? The cars been comprehensively stripped too hasnt it? So it doesnt really have anything to do with what Blitz is after...

Pretty much spot on there ;)

doesnt have track suspension, tis a car build with drag in mind

That wasnt run on pump fuel was it? The cars been comprehensively stripped too hasnt it? So it doesnt really have anything to do with what Blitz is after...

I currently have HKS 2530's on mine and they have been awesome turbos, but to make those numbers you really do have to flog the shit out of them. The T04Z will make the alot easier at the end of the day (albeit though, probably a bit laggier).

1475kg...is not what i would call comprehensively stripped...its only marginally lighter than a stocker....and I weigh 105kg.

with Nick in his car the weights would almost match.

we ran 28psi to do 10.38 and 10.36....redline was 8250rpm...changing at 8000. I dont think i have even come close to "flogging the shit" out of them yet.

35psi and 9250 is flogging the shit out of them.

what makes the car so quick is the almost instant torque the car generates off the line due to the 2530's midrange. The 1.4-1.5 60' are testament to this, to half track we are around 0.2-0.3 slower than Mark's 9.5 sec beast. The second half of the track is where the t04z would be superior, as the 2530 lack the airflow to have the topend for 9sec passes without the use of NOS.

contrary to popular belief, this car was never built with drag racing in mind. Our set-up is typical of a Japanese weekend circuit car. We run all the ultra hard suspension, off the shelf HKS Hyperdamper, Tein caster rods, JIC top arms, Hicas lock etc.

Stace took it drag racing to have some fun....it just got a little out of hand when the car began to produce some incredible times and numbers....the bug bit.

Edited by DiRTgarage
1475kg...is not what i would call comprehensively stripped...its only marginally lighter than a stocker....and I weigh 105kg.

with Nick in his car the weights would almost match.

we ran 28psi to do 10.38 and 10.36....redline was 8250rpm...changing at 8000. I dont think i have even come close to "flogging the shit" out of them yet.

35psi and 9250 is flogging the shit out of them.

what makes the car so quick is the almost instant torque the car generates off the line due to the 2530's midrange. The 1.4-1.5 60' are testament to this, to half track we are around 0.2-0.3 slower than Mark's 9.5 sec beast. The second half of the track is where the t04z would be superior, as the 2530 lack the airflow to have the topend for 9sec passes without the use of NOS.

contrary to popular belief, this car was never built with drag racing in mind. Our set-up is typical of a Japanese weekend circuit car. We run all the ultra hard suspension, off the shelf HKS Hyperdamper, Tein caster rods, JIC top arms, Hicas lock etc.

Stace took it drag racing to have some fun....it just got a little out of hand when the car began to produce some incredible times and numbers....the bug bit.

But then there is the no air cond, no power steeting, no clutch fan...

But then there is the no air cond, no power steeting, no clutch fan...

we run power steering...A/C is only activated when switched (so pulley free spins on cars with a/c installed)...but yes we run thermo's

Edited by DiRTgarage
and what about all the added weight from the cage etc ffs every one thing I've removed I know I've near added 2 for andra or the new set up

Unlike the Japs...we have rules to follow here with our drag cars which means added kg's...:)

anyhow...back on topic...

so Nick.....decided what TO4Z housing you will get?? .81 seems like the go.

Edited by DiRTgarage

im sorry, do disrespect for twins, :) but single is the shit. so long as the manifold is corect. none of this 40mm odd massive thick runners. sorry hks,trust im not reving it to 12grand!!

in terms of exaust housings. .84 splitpulse is the most versitile.(garrett)

for a comparison my old motor (26 with stuff) made 326rwkw on 16 psi.

and it was a. tw41.

or t04e with o trim turbine 60trim 14blade compwheel

.84 split rear .7 front cover.

1.25"id runners about 18inces long give or take.

full boost at 3600 in second.

lowmounts would struggle get that without the bottle.

besides they are laggy but not. (builds boost from low rpm but not full boost till quite late)

anyway nick my advice would be to go for a drive in one equiped with what u are thinking of doing.

just so you can see. and perhaps come to a compromise. cheeres.

:lol: :lol: :lol:

2530 rated at 640hp

t04z rated at ?800hp

efficience and ease of install lives with the twins as a bolt on combo

umm. no ofence. 35psi boost and race fuel + a really good box. and somone who knows how to drive.

how longs a piece of string

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I replaced the whole clutch line with the chase bays braided hose, I think it removes that loop, is it the short hose that comes immediately off the slave or is there a drawing in the manual to find what you’re referring to? It was just re-bled when I upgraded to the nismo slave, old slave worked fine but I thought that might help, didn’t change a thing. It’s like the first half of the pedal is pushing air and then when it finally actuates the master the friction zone is tiny. Makes it practically impossible to launch the car
    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
×
×
  • Create New...