Jump to content
SAU Community

Recommended Posts

hey everybody,

im new to this website and i was just wondering if we could get some skyline c110, c210 or a c211 pics/vids

ive attached a pic of mine taken from the wreckers i bought it from

p.s. i know there is members gallery thing, but this is specifically for c110 and c210's

:P

post-25864-1136785180.jpg

post-25864-1136785102.jpg

Link to comment
https://www.sau.com.au/forums/topic/101220-c110c210-pics-vids/
Share on other sites

hey yeh i got the same car as u dr1ft..exept mine is in all shades of grey..lol i dunno how to put a pic up..lol but i would if i could.. my things alittle slow though, fuel injected, power steering, power windows, and the top of the dash is cracked but its a smooth ride.. i like the rareness of it..its kool..tke it eazy..

Hey i have a 1979 datsun skyline 4 door. Sorry i dont no how to put picks up either but im not sure what the model of it is sorry. all i know is its a 2.4L carby straight 6 auto. Has nothing wrong with it, all i have done to it is put a xplod cd player and speakers into it. Trusty old grandma's car still going. Well if ur interested in pics pm me and i will try and get them to you.

Catch ya.

brenton

Hey i have a 1979 datsun skyline 4 door. Sorry i dont no how to put picks up either but im not sure what the model of it is sorry. all i know is its a 2.4L carby straight 6 auto. Has nothing wrong with it, all i have done to it is put a xplod cd player and speakers into it. Trusty old grandma's car still going. Well if ur interested in pics pm me and i will try and get them to you.

Catch ya.

brenton

its an MGC210

  • 1 month later...
  • 2 weeks later...

Well as v8skylineman saidmy car is a MGC210. DOnt know where he got that from but anywho.

I finally took some pics of my car so here they are.

Picture.jpg

Picture001.jpg

I hope you like. Im also wanting to sell it but i dont think i will get anything for it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all. I am aware there is lots of discussions about jacking points, where to lift the car and what not. But as usual just a lot of "in my opinion" and nothing definitive, and everyone does it in a different way. I want to hear from some experienced people on which points on the car it's okay/safe/recommended to lift the car using a four point hoist/lift. I will attach some images of my underbody. Sills are largely okayish, the driver side jacking point is pretty mangled though and it looks like the underfloor is slightly pushed in too, but I might be wrong. In the German Skyline forum, the consensus is to use the sidemember chassis rails in the front and the rear subframe? bushing in the rear. I know the manual says to never use the sidemember for loading but lots of folk do it and it was definitely done on my car too as they are slightly bent too. Based on the images, what points do I use to not make the already present damage worse? I'd use wood or rubber blocks to spread the load across a bigger area of course. Driver side sidemember and jacking point mangled one) https://imgur.com/a/eKjzrJX Driver side rear jacking point https://imgur.com/a/W3DWF1P Passenger side sidemember and jacking point https://imgur.com/a/65UvIJe Passenger side rear jacking point https://imgur.com/a/h3k7j53 We can also see some underbody rust but so far it all looks somewhat treatable and nothing that requires a Yoshida style restoration.
    • Have you put an aftermarket oil pressure gauge on and verified your oil pressure?   Noise being on the block, on exhaust side, how high up the block does it seem to be? It could be the VCT system getting cranky, especially if it's mainly at idle, and when warm, as that'll be your lowest point for oil pressure. Could be showing that oil passages / VCT solenoid are blocking.
    • Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
×
×
  • Create New...