Jump to content
SAU Community

My New Audio Set Up


AMS
 Share

Recommended Posts

Hey Guys,

Currently in mr Stag I have a full Pioneer system.

- Carosseria Headunit

- 12 Disc Pioneer Stacker

- Kevlar Splits

- 260w Coaxials

- 1000w Pioneer Sub

- 800w monoblock amp

Now I have since aquired a sponsor. Blaupunkt. Now I have never actaully heard any of their systems. Anyone got a Blaupunkt System?

Anywho, this is the new plan.

- 2x Velocity VC650 6.5" Splits 120w RMS (Front and Rear)

- Velocity VX652 6.5" Co-axials 120w RMS (Mounted on back Pillars)

- 3x VW 1200 12" 1200w Sub (Mounted 2 facing out, 1 facing in)

- In Dash DVD player touch screen

- 2x 6.5" Headrest Monitors

- 3x Velocity Monoblock 1x400w amps

- 1x Velocity 4 channel 4x100w amp (For the splits)

hmmm....yeah thats about it. What are your thoughts?

Link to comment
Share on other sites

Blaupunkt are pretty good. They will rival most other brands out there at the moment. I would especially take it if they are a sponser and that stuff is cheap / free...

One thing tho... I wouldn't use a 400W amp on a 1200W sub... You are always best to have more power than needed when powering a sub. Otherwise you will find that the amp will either go into protect mode (when up loud) or the amp will start to distort before the sub does and will try to make the sub reproduce its lovely distored sounds and cause damage to the sub.

- Crimpage

Link to comment
Share on other sites

Take a look at the true RMS figures on the sub (if they will tell you) I wouldnt be surprised if that was 1200w in good conditions for 3.5 sec. I would imagine you will be tunig the system to play below the point of distortion anyhow :O Anyhow, all this gear should sound pretty smegging good, id' love to see some photos when she's done.

Link to comment
Share on other sites

Well because you will find when you go for sponsorships 9/10 times you will get a Quasi sponsorship. Heavily discounted. I am not at liberty to say how much though... Contract :( But yeah, I'm currently in negociations for a full sponsorship. They just dont hand them out to anyone though.

If you want a sponsorship, have a talk to some companies. Pitch some ideas, sell yourself :)

Link to comment
Share on other sites

Take a look at my car. Its Different. Also, I am going to any car shows possible :( All up, I have 11 sponsorships :) Just havnt taken advantage of them yet

Link to comment
Share on other sites

  • 3 weeks later...

nope, seen quite a few blaupunkt head units though, quite good... different and unique...

the information on the sub on their website says that the 380 sub (1000watt rms) has a frequency response of 25 - 1000hz, but like every other place, they dont state a price, they also dont say shit about it being either a dual magnet, dual voice coil, the strength of the magnet etc...

normally that isnt stated for a reason, so i can only assume that it is a single magnet single coil, meaning, if it is powered correctly, it will burn out the coil pretty fast...

due to lack of info, and better options out there, i wouldnt pay more then 300 for one of those, even then, i know better subs to buy...

and as for your contract, ANYONE and EVERYONE can and should get discounts on electronics... never buy the sticker price, they are rediculously priced... if they say they cant give a discount (and its not on special) ask what you have to do to get one, if they say they really cant, f**k em...

Link to comment
Share on other sites

Blaupunkt are ok, they are usually more associated with head units though, but have a nice range of stuff. Its not high end, but better than some.

I can't believe they only have a 400WRMS amp (I gather its a mono amp). Thought they would have had a more powerful version, especially if they are quoting 1000WRMS for some of their subs.

The 12" VW subs that are 1200watts are probably only 400WRMS.

You won't 'burn out' a coil.... If you overpower the sub then your a good chance at it. It doesn't matter how many coils there are.

Stick with the power recommendations from the manufacturer, keep your amp gains adjusted appropriately to prevent clipping and they will work for a loooonng time.

Fixxxer

Link to comment
Share on other sites

Blaupunkt are ok, they are usually more associated with head units though, but have a nice range of stuff.  Its not high end, but better than some.

I can't believe they only have a 400WRMS amp (I gather its a mono amp).  Thought they would have had a more powerful version, especially if they are quoting 1000WRMS for some of their subs.

The 12" VW subs that are 1200watts are probably only 400WRMS.

You won't 'burn out' a coil.... If you overpower the sub then your a good chance at it.  It doesn't matter how many coils there are.

Stick with the power recommendations from the manufacturer, keep your amp gains adjusted appropriately to prevent clipping and they will work for a loooonng time.

Fixxxer

Thanks for your help champ. The VW subs are 1200w rms each :huh:

Link to comment
Share on other sites

C'Mon People. Someone must of heard or own a Blaupunkt sub

what would you like to know about the brand.( I sell the complete line.) also did you chat with the dealer or the manufacturer?

the screen you mention hasn't been released yet. I'm waiting on one currently.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Hey Matt, Link pointed to the 2x IGN power sources from the car as a likely issue, and sure enough pin 31 in the loom does not have power when IGN is on (24 does). So at the ECU, (and this is probably the case for R32 as well as C34) most of the ECU loom goes through the firewall behind the blower motor and there are 2 plugs (of 3 in the junction box) which go up and under the dash, the third plug heads under the carpet to places unknown (likely a body to dash loom joint) So, I started to follow that problem through yesterday. Like Johnny (and R32) I assumed that power was supplied through the 2 connectors near the left headlight so I spent some time pulling the intake etc off and cleaning of 400,000klm of dirt and oil leaks and checking those pins, but there was nothing related to the engine parts or ignition fuses there (and no purple with white trace wire in either side of the connectors) Given that the wire didn't seem to go via the engine bay, I then checked there is continuity from Pin 31 to the second connector to confirm no wiring issue in the ECU loom (it looked likely, given how much that has been hacked up over the years!). The pin marked with the purple dot is the other end of the wire to Pin 31 Then I check for IGN power in the dash loom side of that connector with the key on. Nothing. Given that loom goes up and underneath the top of the dash there is no tracing it without taking the dash out, so I went to the driver's side to see if I can find the other end of that (I'm expecting to get to big body junction boxes after I pull enough apart). However, to get to those functions, I had to pull the covers off the drivers side, I'm pretty sure the problem is in this pic Yep, factory remote start (bottom right), local immobiliser (middle) surrounded by 20 years of butchery. Plan is to totally remove the remote start and immobiliser (I think I will lose remote central locking temporarily as a result) to remove all the suspect stuff given I have other more modern security in the car It's gonna take a while, and it is both cold and uncomfortable out in the shed, not looking forward to it.
    • Hey team,  The clutch on my newly bought 25 swapped r32 feels average and sticks half way. Went to go order a new clutch master but it does not look like the ones that suit the one that’s in the car…    does anyone know what clutch master is this just by looking ?  (The feed is on the side rather than the bottom like the ones the pop up online)  thanks guys new to the RB scene so any help is appreciated cheers !!
    • Id be more than happy to sign up!!! Where do I send the invoices for my fuel usage? I'm happy to provide the mower, oil, and the labour to abuse the motor, just a little help on fuel would be great...   I had tipped the container of oil out into my big "drip tray" and left the small container upside down to drain the oil out of itself overnight. PIcked the container up today, and it has a layer of what feels like either dirt, or shit tonnes of carbon in the bottom of the container. I'm leaning towards it likely being dust, as I doubt the quality of the Sunli BumbleBee having a decent air filter on it, and sections of my yard produce a dust storm, especially because of the high lift blade!   So, filled her up with some fresh Nulon. Seemed to run fine, but it seems to want to run at really high RPM (higher than normal) even with the governor spring slacked off after fire up to try reduce it. If I back the throttle off it a bit to drop the rpm to where I'd like it to be when mowing light grass, it starts to blow a bit of smoke out the exhaust. Opening the throttle back up clears that out. It's definitely breathing oil, as I put my hand down at the breather hose and it's spitting some oil.   My guess is it having been running at high rpm, oil never changed, and it eating dust has destroyed the rings. You know what that means? Time to send it!!!
    • That is what will seal with the bonnet closed. Follow it down while closing the bonnet to see where it ends up with the bonnet closed. The panels don't do anything other than spending money, which this one will do just fine. :p
    • Nah just send me a photo or a drawing and I'll tell you which is better.  It's a new SAU service.
×
×
  • Create New...