Jump to content
SAU Community

Recommended Posts

I take it the first step in importing would be to fill out this form, http://www.dotars.gov.au/transreg/form.pdf

If I am trying to import a soarer, then obviously the application would be approved and then they would send me more papers to be filled in. (as stated in the form)

Can someone please tell me about these extra papers they send, how long after this first application has been approved is it valid?

And whats the general jist of the next papers? are these the papers you fill in once you have won an auction in japan and have the date and all the details of when the car is arriving here in australia?

If theirs examples forms of all the steps I would love to see, thanks.

Link to comment
https://www.sau.com.au/forums/topic/101623-import-paper-work/
Share on other sites

Please search the process has been outlined before. I suggest you have a read of the info on J-Spec's and Prestige Motorsport's websites for the full process.

The form you've linked is the wrong one for someone trying to import a car.

There are actually alot more paperwork than those to fill up.

Importers normally employ custom brokers to complete those forms. Custom brokers will do all the neccessary paperwork once the vehicle arrive in Australian ports.

Correct me if i'm wrong guys as that's what i've been doing for the past imports.

Edited by BL01

All I can find on this site and the ones you linked me to (the prestige motor sport one doesnt work)

Is that they state what happens, eg you find the car through the guys in japan, then they move to the docks, import for approval happens with all the paper work yada yada yada)

Im asking to see the actual paper work.

I went to the FAQ, and it links you to this page

http://www.dotars.gov.au/transreg/vsb/vsb_10.aspx#4.05

Then on that page it says

"The criteria and application form for SEVS decisions and a list of all the vehicle models already assessed under the scheme are available on the Register of Specialist and Enthusiast Vehicles at:

www.dotars.gov.au/transreg/str_sevs.aspx"

So i went to that link which leads to the form I linked to in my first post, how is it the wrong form?

Edited by ascenion24

Apologies in advance for the long post but I might as well explain as best I can for your benefit. For some reason the PM website isn't working for me either.

I'm assuming you're looking at a 30 series Soarer, built between 1990-2000. These cars are eligible for import under SEVS.

So you arrange to purchase to buy a Soarer in Japan through an agent. Buy the car and pay for it.

At the same time you should speak to a RAWS (Registered Automotive Workshop) that is eligible to comply Soarers. A list is availablehere. Contact them and check they will have no problems complying it. Then you would ask them to reserve a compliance plate for you, through an agreement / deposit / etc (depends on the shop, some you may just need to tell them).

The next step is arranging Import Approval. The RAWS is responsible for applying for this, not you. You supply the RAWS with the necessary details and they will apply to Customs, and can take approx 17 days to receive approval.

Next, the car will be shipped. The person holding the car in Japan will arrange for that, once on board it will take approx 2-3 weeks to arrive in Australia, depending on schedules / weather.

As the car is due to dock, you will need to arrange Customs and Quarantine clearance. I recommend you enlist a customs agent to handle the paperwork. You should speak to them as the ship is leaving Japan to give them plenty of time. Basically the clearance process should not go past a few days once the ship has docked in Australia. You would then pay the customs broker (they would usually consolidate all the customs and shipping costs for you), and then you would receive the paperwork to pick the car up from the dock.

The car should be transported from the docks to the RAWS (they can probably arrange that for you), compliance work should not take more than a werek or two but they would need to wait for a compliance (blue) plate to be sent from DOTARS so they can attach that to your engine bay.

Following that, pay the RAWS any sums remaining for compliance, and the car is then yours to arrange registration for.

As you can see, ia lot of the paperwork is out of your hands.

The link you provided is for a RAWS to actually apply for approval to comply those cars. It is not intended for individuals to use.

Vijay

Arh thank you, reading through the dotars website its all pretty vague on how things happen (typical government site)

I didnt know the RAWS had to arrange the import approval.

Does this mean its impossible to just import the car and tow it to your driveway, return parts to stock then take it to a RAW?

Will the RAW only comply the car if they do the import approval?

You'd have to check that with a RAWS for those questions.

But as for once the car lands, I think you have 100 days to present it to the RAWS workshop. 'Think' being the operative word (it's been a few years since I went through SEVS).

http://www.dotars.gov.au/transreg/vsb/VSB10_Form.doc

You organise a RAW to give you a letter of compliance saying they will comply the car, then you fill out this form and tick PART 7, which now makes you eligable to import the car.

That sounds right now yes?

Ascension, I suggest you seek out a copy of High Performance Imports magazine, issue 55. It's got a written guide to the whole SEVS process.

Available from a newsagent if you're lucky or http://www.hpi.com.au/backissues.php

okai im learning slowly.

I spoke to a raw, they said once I buy the car in japan, I give them the car details, they organise the import approval then the car can be shipped.

Now once the car gets here, what happens with all the fees for the docks.

Who do you contact or do you get a bill automatically for stamp and gst etc because they gov already has your details from the approval from the raws.

As the car is due to dock, you will need to arrange Customs and Quarantine clearance. I recommend you enlist a customs agent to handle the paperwork. You should speak to them as the ship is leaving Japan to give them plenty of time. Basically the clearance process should not go past a few days once the ship has docked in Australia. You would then pay the customs broker (they would usually consolidate all the customs and shipping costs for you), and then you would receive the paperwork to pick the car up from the dock.

Okai not to sound like a smart ass but do I just ring up yellowpages direct or something and ask for a "Customs broker"

Obviously not.

A little bit more detail is what im after, do you ring up the dock that the car is being shipped to and ask to talk to someone to arrange quarantine and customs.

How do you get intouch with someone that will look after the port payments.

You just need to look in the yellow pages for a Customs Agent / Customs Broker / Freight Forwarder and speak to someone who will handle a personal (individual) car import.

You will have to obviously supply them with necessary details (what ship your car is on and port of landing, and paperwork regarding the purchase and import of your car). They will handle the rest for you including aranging for a Customs / Quarantine inspection, clearance, and payment of duties/fees.

Once the ship has docked and your car has passed through Customs, the Customs Agent will give you a call, you pay them money for all their services, and they will give you the paperwork necessary to retrieve the car from the docks.

Then the car is transported from the docks to the RAWS. Most RAWS can arrange for this step but you should talk to them.

Seriously though mate I'm repeating the same stuff I said initially. Check out the links and references I've provided above. Contact a RAWS and ask them how they can assist you throughout the entire process. as they usually have excellent contacts.

Importing isn't a difficult process, but it can go horribly wrong if you mess it up. Which is why most people seek out the services of someone like Prestige or J-Spec. They know and can recommend people to carry out each step, and takes the pressure off you having to do it yourself for only a nominal fee.

Arh thank you, reading through the dotars website its all pretty vague on how things happen (typical government site)

I didnt know the RAWS had to arrange the import approval.

Does this mean its impossible to just import the car and tow it to your driveway, return parts to stock then take it to a RAW?

Will the RAW only comply the car if they do the import approval?

your car can onlly leave the docks with the de reg paper and import approval! the RAW applies for the import appreoval and the car comes under their business trading name! as far as taking the car to bring it bak to stokk it depends on the RAW! thats how we do it as we currently comply 30 series soarers supras prius delica and 180sx B)

  • 2 weeks later...
Apologies in advance for the long post but I might as well explain as best I can for your benefit. For some reason the PM website isn't working for me either.hese cars are eligible for import under SEVS.

Thanks Razor$harp for taking the time and posting such well written response, It makes things alot easier to understand when people make the effort to write it out in steps like that

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That is the serial number of your block
    • best advice yet.  so between the elite and the nexus... much of a difference?  cost is damn near identical (only $170 difference).  thank you!!!
    • Hi everyone, I've found some free time to write up my "build thread" which is 10% 'build' and 90% fixing problems of a skyline that has endured a lifetime of abuse. I will start with the backstory & get everyone up to speed. Ever since I was just a teenager in high school I have had a spot in my heart for the shape of an R32 rivaled only by the look of an S13, my mates & I all having overly ambitious dreams as one does about having the sickest car in the school carpark. Unfortunately I started my journey of cars down the path of the Silvia and after spending years of putting up with the underwhelming SR20 life I dipped my toes into the 1J Toyota pool for a small moment until my true compass brought me back to that incomplete dream of an R32. At this point the trawl through marketplace, gumtree, carsales etc. starts looking Aus wide for an affordable example in the current economy which was extremely barebones compared to the good old days of sub 10k cars everywhere. Out of the handful of cars in the budget at the time I settled on a 1992 R32 GTS-T that was located in Adelaide. It had caught my eyes as it was similar price to the others on the east coast and had been RB25DET NEO converted and an open door respray in a custom colour based off TH1. It was also a stand out to me because it already had some NSW registration left which saved me the hassle of getting it on the road in my state. As for mods I was told it was pretty stock other than the motor swap, a nistune to run it, and an unknown fuel pump. My first mistake was trusting the seller blindly that the car was in good condition in all aspects and decided to purchase the car unseen other than some walkaround videos & pictures as the flights down there were very expensive at the time. The price of getting it transported to my door from Adelaide from Sydney was surprisingly cheaper than the flights at the time. I was told the few issues it apparently had was only 1 speaker not working, some cracked or missing trims, and it had been rear ended at some point but had been all professionally repaired (this is all foreshadowing at this point). I paid for the car, and then booked the interstate transport. Now at this point save your criticism as I already know how stupid I sound in hindsight, this was a major lapse of judgement and I accept the problems that followed. I spent the next 2 weeks in a crazed excitement knowing I am finally the owner of an R32 & that it was on its way. I started preparing as when negotiating with the seller I opted out of the Lenso wheels as they aren't really my style & I wanted a set of genuine wheels, and the bucket seats in the car as I am 6ft5 and not the skinniest guy so I had my predictions that I wouldn't fit in them anyway. Due to this the car was put on a set of R33 stockies and some average condition R33 seats that he had laying around. While I waited for the car to arrive I went and picked up a pair of R32 seats and some R32 GTR wheels to fit nicely on it once it had arrived. Being the first time I had done anything like this or had a car transported interstate I had no clue how the logistics of it were, I chose my work as the delivery address assuming it would arrive at some point in the middle of the day. You can imagine my surprise when I wake up to a call from the truck at 5:30am telling me his about 20 minutes away. When I tell you that was the fastest drive to work I have ever done, I managed to catch up to the truck before it even got there. Spent the hours before work taking in the car and living my first experience with one, I had never even been inside one so I spent some time getting familiar with the interior before doing the seat swap. Here is my first proper photo of it as the sun rose in the background. I also noticed it had the switch for the electronic front lip which was a pleasant surprised but sadly upon looking it didn't actually have the lip or the motors or even any wiring behind the switch. As I swapped the seats, the extremely questionable history of the car started to show itself starting with some really dodgy seatbelt buckles that had been extended for some reason with horrendous welds. This was followed by me noticing the drivers side front was quite bent up to which the owner then decided to let me know it had been hit in the front at the same time as the rear end. It also had a pretty leaky power steering rack and the pump was screaming for its life. By now I was a little on edge but I had to get to work for the day, I sent the car down to my mechanic to get the fluids changed and a general check over as I started to question what I had got myself into. I packed the GTR wheels into the car to get put on while it was there as I ran out of time which was a struggle because the handle to release the fuel door/boot was non-existent and just had the end of the cable tied to a bolt. It wasn't much of a surprise when I got a call saying that it looked like the fluids hadn't been done in quite some time. Although that didn't come as a shock, it did catch me off guard when I was told he couldn't open the boot which had the wheels in which I just had open not long before. Mission #1 was to squeeze through the back panel and open the boot from the latch while loaded with a set of wheels which to my amazement he pulled off after a bit of a struggle to reveal there was nothing holding the cable mechanism in place where it sits at the fuel cap. After that dilemma was solved the mechanic did an inspection over the car while on the hoist with nothing too interesting being found other than the expected crushed frame rails. It seems to have had some bilstein shocks installed at some point and judging by the AWD sump that has been sealed up I suspect the NEO is out of a stagea. By the time I got the car back and was ready to have my first drive home in it I was still excited but now quite anxious with the car already. First stop was to the servo to get a nice fresh tank of fuel as I had no idea how long it may have been sitting around for before I bought it. It sat quite nicely on the GTR stockies I must say. Now my drive home from work is short only being a 15-20 minute commute so the chances of anything going wrong is quite small right? WRONG. As I go over a speed bump only 100m from home I start to smell the dreaded smell of electrical burning and my lights drop out and shortly after the car dies. I am in extreme panic at this point thinking the car is going to burn down on its first drive before I have even had a chance to insure it. I move to the bonnet as quick as I can and lift it up, and as I go to grab the bonnet prop my brain is in such a frenzy that it takes me a second to realise my hand is being burnt to a crisp. This is where I notice that there is no plastic clip for the bonnet stay and when I have gone over the speed bump it has knocked the stay onto the positive terminal of the battery welding itself there. Levering it off with a nearby stick I sat there for a few minutes making sure nothing was going to burn down while waiting for a mate to come jump start me. My main stress was that I could've absolutely cooked the ECU or any other electrics. I was relieved when the car started fine with jumper leads on it but it would die as soon as the headlights were turned on so I carefully limped it home with no lights and decided it was a tomorrow task. You can see here where the stand sat on the positive terminal. Thankfully with a new battery the car behaved and seemed healthy. It was pretty smooth sailing for a little while getting to enjoy dailying the car. Interior wise it was pretty much as the seller described except for the the lack of working speakers, the digital controls had no power, and the headunit would randomly turn off & on. I installed a quick release I had laying around from an old car to help with getting in & out of the car and a nice momo wheel. I bought some oem side skirts to match the rear pods that were on the car already, who said a skyline can't be a practical parts mover. Test fit looks good! Found a good deal on a GTR wing & boot that I couldn't turn down. At this point the skyline was being too good to me and had to throw the spanner in the works again. First incident was as I was coming off the motorway and heard a bang and an awful grinding noise. As I pull over down a side street to investigate I notice my whole exhaust has basically fallen off and is dragging on the ground. After waiting around to let it cool to the touch I managed to get it back on its hangers. Thinking it was a weird 1-off instance I didn't think much of it until it happened to me again a few days later to which I see this time the middle hanger has snapped in half and the rear hangers have snapped at the welds. I manage to get the car in to a shop to get the hangers welded and while there I notice that my intercooler has broken its brackets and was being held up only by the piping. Quickly got that sorted and got some thicker brackets out of steel plate to support it all. Just when you thought at this point the car might give me a break, I fill the car up on my way home from the fabricators shop and after I pay I walk back to a good portion of my liquid gold on the floor. I just shrug it off at this point in exhaustion and call it a job for another day. The car had other plans for me though as the next morning on my commute to work, I am halfway there when I notice I am struggling to shift gears. I get lucky with a run of no red lights to work and find some time on my lunch break to investigate the problem. The slave wasn't leaking and the master still had fluid so I was left confused until I contorted myself under the dash and noticed the whole pedal moving loosely side to side when pushed in. Upon pulling it out of the car I found it to be multiple snapped spot welds on the clutch pedal bracket and the actual face of the pedal that sits against the firewall had snapped in half. I jerry rigged it with nuts & bolts at the spot welds but I will need to come back to this in the future and replace with one of the strengthened nismo brackets available. I then got to enjoy the car for another 2 months of cruising and dailying it, peep the obnoxious fireballs it would shoot every shift on the dodgy tune that was on there. On a sunday drive in that period of working car, I was on my way home on the motorway when I heard a slapping noise on my front left to which I pulled over to find my indicator had ejected itself from the car. Nothing a bit of tape can fix lol. I then bought some smoked indicators but after I realised I didn't like the look I found some damaged series 1 indicators. I repaired the tabs with some cut up cards and they looked good to me. My next venture was the hunt for some wheels, I test fit my mates Work Equip Spinning that were tiny 15" and I wasn't sold on the small wheel look. I ended up finding a killer deal on some Rays Volk Racing Group C in 17x8.5 & 17x9 that had been rebuilt many years ago and not ran on a car. I am still yet to get these on the car as they require some specific adapters and shank style lug nuts but I think they will look awesome. At this point my 2 months of reliability had ran out and on a cruise with some friends I suddenly lost the ability to shift gears again and thankfully could get it home by taking main roads and not having to stop. This time my master cylinder was bone dry and the culprit was the clutch slave that had decided to let go. It was a quick and fairly easy fix, but in my luck bad things always come in waves. Only a few weeks later I am on my way home from World Time Attack when the car completely shuts off while coasting down a hill, I try crank it while I still have momentum but no luck. Thinking I might have killed the fuel pump from running it low or maybe killed a CAS because the symptoms seemed to line up somewhat, I opt to get the car towed to a workshop to get fixed up on the Monday. When it gets there they get stuck into diagnosis and the CAS wasn't sending a signal to the ECU, and the fuel pump was also dead so it was comical for a small moment there. They replace the dead fuel pump when one of them notices some smoke coming from the passenger kick panel. Boy oh boy this is where it gets very bad and very expensive. I am not sure who wired the car when the NEO swap was done originally but I hope they never attempt auto electrical again as I am lucky that this handywork only managed to short and kill the ecu and engine loom and not do more damage. This is the point where you could say the 'build' started but not by choice. After some deliberation with my bank account I opted for a Haltech Elite 2500, RB terminated loom, and WB1. While I wish I stopped there and did the minimum of get the car running and leave it at that, I slipped into the rabbithole and decided I wanted to make the most of getting a retune and throw some bolt ons at it and see what it would do. I then threw together a bit of a mix n match build of marketplace deals starting with a GCG GTX3076R, a turbosmart FPR6, 980cc injectors, walbro 460, jackspanian ffp, throttle & fuel rail. At this point it was coming along nicely, the shop was making quick work of it and the bay was looking a lot nicer without the stock crossover intake. I also got them to replace the noisy centre bearing while it was off the road. Then we couldn't get an OEM CAS to talk to the haltech so ended up getting a PRP Street Trigger Kit for it.   While the car wasn't playing nice it decided to kill the stock alternator too so went with an LS1 alternator conversion kit. By now the car was pretty much done and ready to go but come tune day the car kept throwing the timing out every time it would warm up. Upon further investigation it seemed to be warping the PRP trigger bracket when the metal would get hot and expand which would cause the sensor to lose timing as it moves. Herman advised that they have seen the issue a few times now and don't know what the cause is. At this point I decided to switch to the PRP Pro kit with the crank trigger and considering the whole timing belt would have to come off I decided to get a new timing belt kit with water pump fitted. The car would now run fine with no issues and it was finally tune time. It ran up a healthy 275kw but ran out of boost due at 17psi to the rear housing being undersized. At this point the clutch also started slipping and due to it still being a weak RB20 box the tuner set it up to ramp from 8psi up to 17psi with the revs so that it wouldn't load up the clutch and box as hard. Car drives like a dream now. With the car back on the road I could return my focus to the smaller details, starting with getting a set of badges for the hood and quarters. I was struggling to drive with shoes on and I noticed that my accelerator pedal sits higher than my brake and clutch, if someone could confirm how it should sit that would be great. Next little changes was a killallwipers rear windscreen wiper delete, I also got some interior bits I was missing such as parcel shelf speaker covers, wiper trim cover, and boot floor and trims. Finally made it to a SAU NSW event which was awesome to cruise with a bunch of likeminded individuals. Another creature comfort I decided to look into was my lack of A/C. Since the Haltech got wired up the digital climate would power up now, and would blow but no cold air. First issue noticed was the lack of belt on the A/C compressor. After sorting that to no avail, it also had no A/C gas in it, but turns out the condenser has a huge leak. We are almost caught up on the story so far, but at the start of this month while coming into a driveway I heard a huge clunk in the front end to which I got out to witness whatever dodgy camber arms someone installed in this at some point decided to snap in half and I feel very lucky that it didn't happen at speed. Managed to get the car fixed the next day with some replacement GKtech arms. Next problem to address was the leaking gas tank from months ago. Checked the pump hanger seal first but that was fine, stuck my camera up after filling up to try scope out the leak which looked like the breather hose. Got the car up on a hoist prepared to drop the tank when I reached up to feel with my hand and I could feel that the hose clamp was missing and soon after felt that there was a gaping hole in the top of the hose. Replaced and tested and the car holds its liquid now and doesn't give me a fume headache whenever I drive it now. Finally have caught up and now onto fixing my latest issue which is the lack of dash light when driving at night, checked fuses first, then when searching I found the common problem of the headlight switch burning out but mine looks fine. Next test will be plugging a known working headlight switch into my car to tell if my switch is dead. Sorry for the long read but I wanted to be thorough, so if anyone made it this far I salute you soldier. Enjoy the rest of your day and I will keep this updated with issues I find/solve and any cool mods I can do inbetween. Merry Xmas!
    • can someone tell me what information a block number of 330680a on a rb25det engine specifies?
×
×
  • Create New...