Splitfire Coil Packs

[Suspense]

Looking for the voltage outputted from a set of SplitFires.... tried searching to no prevail

[R31Nismoid]

same as stock coils

[Suspense]

same as stock coils

<{POST_SNAPBACK}>

so what makes them better?

[race_snooze]

stronger arc dont blow out spark during hi boost

[R31Nismoid]

so what makes them better?

The fact they are new and not old.

This has been covered before

here is one such thread

http://www.skylinesaustralia.com/forums/in...topic=87888&hl=

search for the rest of em

[rb25]

same as stock, isn't that 12V?

-rb25

[Suspense]

so how much power are these capable of handling before they strt to missfire?

[R31Nismoid]

as much as stock coils... which then depends on how much boost etc etc etc.

too many variables without listing your setup.

i got 330rwkw from stock coils before i needed more spark, not neccasarily bigger coils.

cheers

[rob82]

The ability of a coil to fire across a 0.8mm gap is essentially dependant on potential voltage difference across the gap and the conditions within the camber. When the density of the mass within the chamber is sufficiently high that ionisation cannot occur only an increase in plug current will propogate the spark.

Thats why a good CDI ignition system has a high secondary voltage along with a high current capacity.