Jump to content
SAU Community

Recommended Posts

  gts25t4door said:
Do they come with wastegates Daniel?

cheers

Chris

Most of them do in the smaller ones Chris. by small I mean GT2860R or smaller. Some of the larger ones do but is rare. I can let you know if they do if you have one in mind.

Also you can use your standard actuator on a new turbo if you like....the actuator still does the same job.

Link to comment
https://www.sau.com.au/forums/topic/101678-turbos/#findComment-1864878
Share on other sites

I got the price back to graft the RB turbine housing onto the GT30R and it is around $2150. You would need around another $150 to get the braided lines for water and oil done and to make up something for the 4 inch inlet. But still rated at 500hp with the RB rear on it and still bolts straight up to the stock manifold and dump pipe.

Link to comment
https://www.sau.com.au/forums/topic/101678-turbos/#findComment-1864885
Share on other sites

  wrxkilla said:
yo dan mate

i notice no gt3240s etc?

those not available. (not intrested for me - just a general intrest)

thanks

mick

Yeah they should be mate. I just don't think they are called that anymore. Can you tell me what hp rating they were and possibly what exhaust a/r they came with. They will match up to something on the list somewhere.

Oh and BTW, I am sorry to say that due to the fact that the T04Z's sold out before they hit the shelf....Garrett in their infinite wisdom have decided to jack the living crap out of the price on them.

They are now $2165. Retail on them has jumped to $2750. Sorry mate. I hope you didn't end up wanting one.

I'll also send a message to my rep and find out what might match up to the old 3240 that you know.

Link to comment
https://www.sau.com.au/forums/topic/101678-turbos/#findComment-1871740
Share on other sites

Dan might be an idea to have a matching list of specs (or add additional specs) to the price listing

I would also think that should you be able to get something that bolts onto the existing manifold and dump with minimal intake mods and new oil and water lines and you would make a KILLING

Link to comment
https://www.sau.com.au/forums/topic/101678-turbos/#findComment-1872173
Share on other sites

  Bobjones said:
Dan might be an idea to have a matching list of specs (or add additional specs) to the price listing

I would also think that should you be able to get something that bolts onto the existing manifold and dump with minimal intake mods and new oil and water lines and you would make a KILLING

I can get it done to the standard manifold...no probs at all. I am going to price up how much to make the adaptor plate and then how much to sprayweld it to the manifold....it's the only proper way to do it.

Shouldn't be anymore than say $150 but problem is the dump pipe still won't go up to the T2 style flange...that's where you have the problems.

I'll figure something out though.

Link to comment
https://www.sau.com.au/forums/topic/101678-turbos/#findComment-1878663
Share on other sites

  wrxkilla said:
ripper yeh gt 3240 approx 600hp-700hp with a 0.82 exh

thanks dan

yeh dont worry about t04z :D

That was easy. The turbos in the list rated at that much horsepower and with the 0.82 are the 714568-2, the SB8006A (which is what was used to be called a GT30R), and the GT3582R-IW which is an internal wastegated version of the 714568-2. Price on those is $1850 and $1890...(don't forget my PM)

Cheers, Daniel.

Link to comment
https://www.sau.com.au/forums/topic/101678-turbos/#findComment-1878685
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 馃槈. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 馃槏.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 馃檹 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 馃槈. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 馃槏 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
  • Create New...