Jump to content
SAU Community

Trust Turbo Help

italiasr

By italiasr,
in Engines & Forced Induction

 Share

Recommended Posts

italiasr Collaborator

italiasr

Posted
Posted

Hi,

I am thinking of rebuilding my Rb20 into an RB24, and am looking for a turbo kit. The one Im looking at is the Trust TD-06SH 25G full turbo kit (Exhaust housings, exhaust manifold, dump pipe, wastegate etc. included), and have contacted greenline.jp to see if they can get on and how much it costs, and they said that they didn't make them for R32 GTS-t's.

I know they make them for the RB25, and have read threads saying that you can get them for the RB20, and I just want to know if the Trust TD-06SH 25G full turbo kit for the RB25 will work on my RB20, or if anyone knows where to get the Trust TD-06SH 25G full turbo kit for an RB20.

Thanks,

Simon.

Link to comment
https://www.sau.com.au/forums/topic/101739-trust-turbo-help/
Share on other sites
italiasr Collaborator

italiasr

Posted
  • Author
Posted

Could I buy the Trust TD-06 L2 20G turbo kit, then take out the TD-06 20G and fit the TD-06 25G straight in? Would there need to be any modifications to the manifold, dump pipe, etc. or would the TD-06 25G fit straight in?

Thanks,

Simon.

RS500 Experienced

RS500

Posted
Posted
Could I buy the Trust TD-06 L2 20G turbo kit, then take out the TD-06 20G and fit the TD-06 25G straight in? Would there need to be any modifications to the manifold, dump pipe, etc. or would the TD-06 25G fit straight in?

Thanks,

Simon.

dude,

the TD06-25G is sold as part of the RB25DET kit as it is a larger turbo than the TD06-20G, which is suited to the larger RB25 (2.5L) engine.

although, it is known that exhaust manifold stud patterns are the same b/w the RB20 & RB25 engines so buying a TD06-25G kit should do u fine, but not on the standard 2L RB20DET engine. It will be very laggy and UNresponsive.

i actually toyed with this idea as i am purchasing an R32 GTS-T which had an RB24DET in it with the TD06-25G kit, although the engine was damaged and a standard RB20DET is going in there with a Garrett T3 turbo, until i can rebuild the engine again :P

and before you ask, NO, i'm not really planning on selling the turbo kit at the moment.

italiasr Collaborator

italiasr

Posted
  • Author
Posted

Yeah,

Im gonna be converting my Rb20 to an RB24 soon using all tomei forged pistons, camshaft, head gasket,etc.

Thats why im looking at the Trust TD-06 25G. There's no way id put that turbo on the standard RB20 though.

Thanks for the info.

italiasr Collaborator

italiasr

Posted
  • Author
Posted

Has anybody done this is anything similar?

Also, roughly what rwkw will I get With this turbo kit in an RB24, along with an A'PEXi Power fc, Trust RSPL HG fmic, Trust oil cooler, Nismo Z32 afm, Sard 800cc injectors, splitfire direct ignition system, and tomei fuel pump.

And what would the max boost that I could run be.

Thanks,

Simon.

italiasr Collaborator

italiasr

Posted
  • Author
Posted

Has anybody done this is anything similar?

Also, roughly what rwkw will I get With this turbo kit in an RB24, along with an A'PEXi Power fc, Trust RSPL HG fmic, Trust oil cooler, Nismo Z32 afm, Sard 800cc injectors, splitfire direct ignition system, and tomei fuel pump.

And what would the max boost that I could run be.

Thanks,

Simon.

italiasr Collaborator

italiasr

Posted
  • Author
Posted

Has anybody done this is anything similar?

Also, roughly what rwkw will I get With this turbo kit in an RB24, along with an A'PEXi Power fc, Trust RSPL HG fmic, Trust oil cooler, Nismo Z32 afm, Sard 800cc injectors, splitfire direct ignition system, and tomei fuel pump.

And what would the max boost that I could run be.

Thanks,

Simon.

italiasr Collaborator

italiasr

Posted
  • Author
Posted

Has anybody done this is anything similar?

Also, roughly what rwkw will I get With this turbo kit in an RB24, along with an A'PEXi Power fc, Trust RSPL HG fmic, Trust oil cooler, Nismo Z32 afm, Sard 800cc injectors, splitfire direct ignition system, and tomei fuel pump.

And what would the max boost that I could run be.

Thanks,

Simon.

italiasr Collaborator

italiasr

Posted
  • Author
Posted

Has anybody done this is anything similar?

Also, roughly what rwkw will I get With this turbo kit in an RB24, along with an A'PEXi Power fc, Trust RSPL HG fmic, Trust oil cooler, Nismo Z32 afm, Sard 800cc injectors, splitfire direct ignition system, and tomei fuel pump.

And what would the max boost that I could run be.

Thanks,

Simon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Shoota's R33 GT-R RB30/26

      By MBS206 · Posted

      It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • PranK
      My BMW 335i

      By PranK · Posted

      No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Milkmun
      Cleaning my wheels 😍

      By Milkmun · Posted

      Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • niZmO_Man
      Duncan's V37.......race car?

      By niZmO_Man · Posted

      Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...