Jump to content
SAU Community

Recommended Posts

Hmmm it seems that I have aquired a very disturbing noise on the left side of my engine. Its especialy noticable on a cold start or when the car has been turned off for a while. Well how do i describe it ........ well its like a knock noise that is quite loudish and starts off about 6 seconds apart and then gradualy increases to 8 seconds and so on ... I notice the noise is louder when i rev the car hard and then back off ... its almost like there is a knock as soon as the turbo winds down, so im a little suss about the turbo ....

I aquired the noise eva since my car detonated at about 240, im not 100% sure but at the time i think the boost spiked and the pressure in the lines ended blowing the hose from plenum to the fuel regulator off causing the car to run lean while doing 240, and melted 2 brand new platnum plugs and left me with this disturbing noise ...

So after giving yo all a run down of my problem, does anyone have any ideas as to what may be causing the knock noise ??

Link to comment
https://www.sau.com.au/forums/topic/10201-disturbing-noise-from-engine/
Share on other sites

does it go away after a while?

ive got the same thing on a cold start. mines a blown exhaust manifold gasket which i should fix soon...

if its that then nothing to worry too much about. gasket costs $80-$90 and a good afternoon pulling everything off

other things it could be are lifters which can be helped by using certin types of oil but inevitably will require the head to be rebuilt.

or it could be a valve as mentioned. go to a mechanic and let someone listen to it in person. its hard to diagnose these thigns over the interent

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Damn... Not the feedback I want to hear.
×
×
  • Create New...