Jump to content
SAU Community

Recommended Posts

After the drags last week, I got pulled over by Mr Plod who proceeded to 'fine tooth comb' my car in search of a defect.

He kept asking do I have a problem with him...(obviously import victimisation is one...) and checked in no particular order.

: wheels

: tyres

: tyre placard

: engine bay

: intercooler - asked - when did you fit the intercooler? (hint: I drive a GTR)

: engine for leaks

then asks if I know its illegal for a blow off valve to be audible by other motorists....and can I turn it down...

True or not?

Link to comment
https://www.sau.com.au/forums/topic/102060-the-law/
Share on other sites

I think you got off pretty easy if he didnt sticker you. As far as I know they can do you for just about anything, and the onus is on you to prove that its correct or get it changed. Correct me if im wrong, but BOV's are illegal if they were fitted aftermarket, along with everything else aftermarket.

Link to comment
https://www.sau.com.au/forums/topic/102060-the-law/#findComment-1871176
Share on other sites

I was told by the cop that gave me my yellow sticker that they have to find 2 defects to give you a yellow, is that right? So they got me for being to low...pretty obvious one, and then searched through for a second defect without a permit, so they ended up making the second one non standard seat rails, even though they used the same chassis points as the original rails.

I have a permit for my atmo BOV, that means they cant yellow me for it right?

Link to comment
https://www.sau.com.au/forums/topic/102060-the-law/#findComment-1871328
Share on other sites

never had a problem with cops...

i just try to be as nice as i can,

i got pull over in NB, with fake plates on (the plates said the real number/letters but the colour and the material was fake) and the cop was really nice about it, check my car ask me about my bov too (he ask if it was loud and if i could make it softer), i told him i could make it softer he was ok with that :)

he also check everything on my car from front to back, just ask me if all my mods where done pro or backyard.

Link to comment
https://www.sau.com.au/forums/topic/102060-the-law/#findComment-1871397
Share on other sites

i think its 3 things to get a yellow coz i had 2 bald back tyres and the cops looked all over my car for something else so that they could give me a yellow. ended up getting done for the tyres and a loose battery clamp. even tho i could have just tightend it right there.

Link to comment
https://www.sau.com.au/forums/topic/102060-the-law/#findComment-1871562
Share on other sites

i think its 3 things to get a yellow coz i had 2 bald back tyres and the cops looked all over my car for something else so that they could give me a yellow. ended up getting done for the tyres and a loose battery clamp. even tho i could have just tightend it right there.

I was told 2, and I got a yellow for 2 after they were checking everything to find a second defect/mod that didn't have a permit.

So does that mean a car pulled over for blowing a sh*t load of smoke would be ok if a second defect couldn't be found? There are so many cars out there running like dogs. The cops that gave me a yellow drove past a car blowing a huge amount of smoke to pull me over :P

Link to comment
https://www.sau.com.au/forums/topic/102060-the-law/#findComment-1871603
Share on other sites

My car has bulk mods, 400 hp at the treads, top mount turbo, stainless manifold, huge front mount, loud bov, big oil catch can, blah blah blah.. I passed the pits no worries, said he'll write permits for everything. (cept screamer pipe :P ) stock road pits.

Link to comment
https://www.sau.com.au/forums/topic/102060-the-law/#findComment-1871841
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • They also make them with the motor mounted on the side 
    • Just be warned that that turbo will not be a direct re-fit to the car. The exhaust housing is, of course, in the same place. It has to be - it's bolted to the exhaust manifold. So the dump will fit up. But the centre housing is not as long, so the comp housing will move backwards. This will affect both the turbo inlet and the outlet. There is fab work that needs to be done. Yes. it has one, it should have one. Paper gasket.
    • I only recently purchased the vehicle, it came with the flex setup but the current tune is e85 only, which is why im wanting to get the tune redone to enable a mixture.  First i need to get the exhaust redone tho. I was thinking of getting a varex muffler but it sems they dont fit well in the 33 (hang low because of the valve mechanism which sticks out on top) and generally dont sound good. So that leaves me with redoing the entire exhaust (more resonators and mufflers) so its not a menace when i come and go from home, and then have the aes dump valve somewhere along the line to really open it up. I was thinking of having it before the cat but after seeing how insanely loud it will be (on a vl turbo) im thinking of putting it more towards the rear of the car, after one of the resonators. 
    • At this point I'm just 'hoping' it's the turbo seals. I did speak to someone who said it's normal for these turbos to have a bit of axial play? Not gonna lie I've never checked a turbo for axial play before but you could hear it tapping a bit as I moved it back and forth. Surely that's too much? My theory is (could be completely wrong), bad axial play, worn bearings, bad seals, oil into dump/compressor side, burns in exhaust = blue smoke. On a timing belt related note, my crank pulley was missing that front plate that sits in front of the timing belt. It's that metal round plate. It did have the rear one, and the woodruff keys are in the crank which was nice. Can anyone confirm if the NEO det engine has a front plate, im sure it would to protect the front of the timing belt or something. Water pumps...the pump I got was an NPW (yes grill me if I should've got a genuine one lol). It has a smooth mating surface, kit came with a pretty pathetic looking paper gasket. Do I need to use any RTV or just trust the gasket will work because its a smooth mating surface? Cheers legends have a good Easter break!
    • Cheers man, I thought the same.   Bit of an update on it all. It was definitely blue smoke, not grey after all. It didn't really smell oily but it was blue after all. Also puffing just the smallest amount on idle with no throttle.   I ended up pulling the intake and exhaust off and there was around 3mm of axial play on the turbo shaft. So I figured we'll that's buggered and sent it off to get hi-flowed at hypergear. Haven't got it back yet.   I haven't compression tested it yet. Had a look in the cylinder and cylinder 1 spark plug, looked a bit sooty but not oily. Then I've just started doing my timing belt because it's age is unknown.
×
×
  • Create New...