Jump to content
SAU Community

Recommended Posts

Yesterday i decided it would be a good idea to wash my car thoroughly as i haven't done it in a while. Had the idea to wash out my engine bay which was looking pretty grimy. Sprayed some degreaser on the engine cover (over the spark plugs) then gave it a quick squirt with the hose to wash it off (not realising that it is actually not waterproof at all).

Spent today with it running on 4 and 5 cylinders (didn't start playing up till i got far enough from work that i couldn't drop it home and drive the other car) and 2 hours tonight with a hairdryer drying it out...

My question is does anyone have a way they use to wash the engine bay without getting water in there???

Cheers

Link to comment
https://www.sau.com.au/forums/topic/102074-why-im-an-idiot/
Share on other sites

Yesterday i decided it would be a good idea to wash my car thoroughly as i haven't done it in a while. Had the idea to wash out my engine bay which was looking pretty grimy. Sprayed some degreaser on the engine cover (over the spark plugs) then gave it a quick squirt with the hose to wash it off (not realising that it is actually not waterproof at all).

Spent today with it running on 4 and 5 cylinders (didn't start playing up till i got far enough from work that i couldn't drop it home and drive the other car) and 2 hours tonight with a hairdryer drying it out...

My question is does anyone have a way they use to wash the engine bay without getting water in there???

Cheers

lol... I did this, well it wasnt me it was a friend helping me clean the engine bay for the Show & Shine, didnt manage to go :P.

I dont clean my engine bay.

I think drying it with hair drier could be bad? Use a clean lint free cloth and stick it in the coilpack hole and get the water out.!

Link to comment
https://www.sau.com.au/forums/topic/102074-why-im-an-idiot/#findComment-1871497
Share on other sites

lol

Kinda makes you wonder why the bonnet is there.. and the water run off gutters..

Try dry everything i guess.. you don't want any moisture near electrical wires etc.. take it to a mechanic..

dont take it to the mechanic, like d00dz said, take the coil packs out and just dry them off, put them back in and she'll work just fine :P .. dont the same thing too. had 3 drops of water on a coil pack which caused it to miss

Link to comment
https://www.sau.com.au/forums/topic/102074-why-im-an-idiot/#findComment-1871568
Share on other sites

dont take it to the mechanic, like d00dz said, take the coil packs out and just dry them off, put them back in and she'll work just fine :P .. dont the same thing too. had 3 drops of water on a coil pack which caused it to miss

Well.. i mean if he's having "serious" problems take it to a mechanic.. unless you know alot about your car..

Link to comment
https://www.sau.com.au/forums/topic/102074-why-im-an-idiot/#findComment-1871765
Share on other sites

hahahah nah its all good, i was careful with the dryer and didn't let the coils or wires get too hot or anything and today no miss. Just a huge waste of time. I won't be doing that again, i think silver gtst's idea is a good one.

I used to do it with my vl and it wasn't that bad cause the water could evaporate more easily (no cover). Lesson learnt

Link to comment
https://www.sau.com.au/forums/topic/102074-why-im-an-idiot/#findComment-1872456
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • Should have asked what is the car?
    • I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
×
×
  • Create New...