Jump to content
SAU Community

Recommended Posts

I had to pay around $400-500 tax for one of my orders which was $1600, the other order was $1100 but that didn't get held up. You will also need a customs broker to release the goods from customs. I think I payed around $100 for their services

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/11/#findComment-2309054
Share on other sites

  • Replies 343
  • Created
  • Last Reply

Top Posters In This Topic

I had to pay around $400-500 tax for one of my orders which was $1600, the other order was $1100 but that didn't get held up. You will also need a customs broker to release the goods from customs. I think I payed around $100 for their services

You don't need a custom's broker, though it makes the process easier. You can actually register with customs 'integrated cargo management system' or whatever they call it, although its a pain in the arse (you have to have signatures witnessed by a JP, pay a fee of $40-60, fill out detailed forms, etc). If you talk to the gateway facility people for long enough (like I did), they'll probably just release it if you sign a couple of forms ;)

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/11/#findComment-2309164
Share on other sites

I've purchased over $20K in car parts from Japan/Hong Kong/Singapore over the last 5 years and still have not been charged for cutoms/GST...

I also know that shipping from Japan/China/Hong Kong only takes two days to get to Australia via normal EMS. If nengun are taking an average 3 weeks to get parts to you then it tells me one thing....they do not hold any stock...at all. It would seem that they recieve your order, source the product from their supplier(the 3 week delay) and then send it on.

It makes me a bit nervous tha nengun don't have enough capital/overheads to hold any stock themselves ready to send out as soon as payment is recieved. All other asian shops I purcahse from I usually pay for on a Monday adn recieve the product on Wednesday or Thursday. To be honest they should only take payment once the product is in their hands ready to ship.

Makes me think I should setup a shop over there and offer a quicker turnaround time

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/11/#findComment-2338154
Share on other sites

I've purchased over $20K in car parts from Japan/Hong Kong/Singapore over the last 5 years and have never been caught once with customs/GST

I also know that shipping from Japan/China/Hong Kong only takes two days to get to Australia via normal EMS. If nengun are taking an average 3 weeks to get parts to you then it tells me one thing....they do not hold any stock...at all. It would seem that they recieve your order, source the product from their supplier(the 3 week delay) and then send it on.

It makes me a bit nervous tha nengun don't have enough capital/overheads to hold any stock themselves ready to send out as soon as payment is recieved. All other asian shops I purcahse from I usually pay for on a Monday adn recieve the product on Wednesday or Thursday. To be honest they should only take payment once the product is in their hands ready to ship.

Makes me think I should setup a shop over there and offer a quicker turnaround time

Hey kennedy, mind letting us in on what companies those are that have such short turn around time?

I recently bought an HKS cat back from nengun. I paid on the 4th and it still hasn't shipped yet. It cost me $850 or so delivered. I checked locally and got a best quote of $1100 plus delivery through to $1400 from Autobarn.

If 3 weeks will save me $300, so be it. But if I can get a similiar price quicker, well, then they'll get my business.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/11/#findComment-2338298
Share on other sites

Hey kennedy, mind letting us in on what companies those are that have such short turn around time?

I recently bought an HKS cat back from nengun. I paid on the 4th and it still hasn't shipped yet. It cost me $850 or so delivered. I checked locally and got a best quote of $1100 plus delivery through to $1400 from Autobarn.

If 3 weeks will save me $300, so be it. But if I can get a similiar price quicker, well, then they'll get my business.

I bought alot of parts through Japan eBay from private sellers. Until recently I raced RC cars pretty seriously and thats where about 15K went. That where i bought my chassis, motors etc etc so sorry I cant recommend any shops for full size car parts but i got heaps of links for RC shops. (something tells me your not interested inIn saying that, the product being sold does not matter...shipping is the same for all products.

Do nengun offer an EMS tracking reference? I assume they do..so if you look at the order history I'm gonna take a stab at it and say that the original lodgement date will be only 2-4 days before it is recieved. So why did i take up to three weeks to get the item to a Japan post office? ....refer to previous post.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/11/#findComment-2338334
Share on other sites

Do nengun offer an EMS tracking reference? I assume they do..so if you look at the order history I'm gonna take a stab at it and say that the original lodgement date will be only 2-4 days before it is recieved. So why did i take up to three weeks to get the item to a Japan post office? ....refer to previous post.

In fairness to Nengun, they make it no attempt to claim otherwise (ie. that they hold stock). They are quite clear about the ordering process. And it doesn't suprise me they don't stock parts because they don't have a store front, the parts can be very expensive, and they aren't interchangable (ie. seperate lines for almost every engine, car, and generation).

I said this in another thread, but it bares repeating here: if you want to save money, be prepared to waitl if you want something quickly, pay more. There is a reason companies that hold stock tend to have higher prices.... because they have overheads like holding stock.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/11/#findComment-2338909
Share on other sites

I said this in another thread, but it bares repeating here: if you want to save money, be prepared to waitl if you want something quickly, pay more. There is a reason companies that hold stock tend to have higher prices.... because they have overheads like holding stock.

Yeah, I remember hearing a quote about that:

"You can get the parts Quickly, Cheaply or in good condition. Pick two."

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/11/#findComment-2341376
Share on other sites

Yeah, I remember hearing a quote about that:

"You can get the parts Quickly, Cheaply or in good condition. Pick two."

Well that’s a nice bold generalisation! Glad to see that your content with being dictated your terms of sale that is against the norm of modern internet business.

Lets take it from another angle.......

They are an internet based shopfront, there are f*ck all overheads

A website, one or two employees..Thats about it.

Lets think......With all the negative threads and discussions about nengun's turnaround times on multiple forums I wonder how many potential buyers decided against using nengun for this reason alone. I'm thinking heaps. Offset those customer potential sales against an outlay of stock of your top 100 selling items and I think Nengun would come out on top and the success rate of repeat business for nengun would greatly improve.

I for one am sick of the nengun monopoly myth that if you wanna buy something from Asia you have to wait up to a month coz its bollocks. America is the only place where the standard package can take maybe up to 10 working days to deliver.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/11/#findComment-2342562
Share on other sites

so post links to alternatives, with prices like nengun, that dont take forever.

btw, those threads about nengun's poor delivery time were over christmas...it seems to be the case that it was a one off and things went back to normal after that

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/11/#findComment-2343809
Share on other sites

so post links to alternatives, with prices like nengun, that dont take forever.

btw, those threads about nengun's poor delivery time were over christmas...it seems to be the case that it was a one off and things went back to normal after that

Acutally nenguns poor service and delivery time is well documented throught the year some have waited many months for items i bought a nismo fuel pressure reg and waited 2 months for it to arrive

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/11/#findComment-2343971
Share on other sites

Bought a SAFC II for $380 delivered and it took 13 days to arrive. No complaints about service and I will use it again. For the price I am happy to wait a few weeks more, the stories of deliveries taking 2 months probably meant that nengun had to order the product from the supplier and they had to manufacture it.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/11/#findComment-2344046
Share on other sites

I for one am sick of the nengun monopoly myth that if you wanna buy something from Asia you have to wait up to a month coz its bollocks.

What's a "monopoly myth"? :wave:

Look, noone is forcing anyone to use Nengun. IMHO their turn around is too slow, but if I want the absolute cheapest price (usually), I know where to go. Personally I would pay a bit more and use Greenline if you don't want to save every cent. Greenline confirm stock levels when you ask for a quote. Their turn around is usually very good, and they are within 5-10% of Nengun on most products.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/11/#findComment-2345217
Share on other sites

Monopoly = Nengun are pretty much the only Japan supplier so they can dictate the tersm of sale

That's rubbish. Greenline, Perfect Run, Taka Kaira and a zillion and one smaller sellers (just look at NissanSilvia) can supply parts from Japan. Being the best known player does not equate to a monopoly.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/11/#findComment-2345687
Share on other sites

What's a "monopoly myth"? :(

Look, noone is forcing anyone to use Nengun. IMHO their turn around is too slow, but if I want the absolute cheapest price (usually), I know where to go.

They also have the total cost including shipping on the site and the easiest order process and site nav structure out of all the performance parts sites. The Greenline/Perfect Run email process isn't too bad, but I like to have a proper receipt I can print and save to the HDD.

I'd consider yourself, Kennedy, one of the unlucky few rather than Tuffr32 (above) one of the lucky few.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/11/#findComment-2345694
Share on other sites

i'd rather wait a few weeks and get the lowest price than pay top dollar to get it here next day

so what, who cares if it takes 4 weeks for a part.

if its a part that you knew was going to stuff up, or it's something thats going to make your car go faster, im sure that you don't need it right now. you've probably spent months saving up for your dual HKS ball bearing turbos. so whats the difference with waiting a bit longer for shipping.

no-one has patience these days.

as I've said on other forums. its like when you finally get to nail your new gf. sometimes the wait is worth it, cuz if you hit it on the first night, you wonder how many people have had that same opportunity.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/11/#findComment-2360541
Share on other sites

I prefer Greenline, they usually get back to me on the same day and are alot of the time cheaper (I've found)

The thing that has annoyed me with Nengun is that if a par isn't listed and I ask for them to put it on the site (so I can buy it), 90% of the time they ignore my request.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/11/#findComment-2361732
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • The hot exhaust light will come on not from just the cat being blocked, but it's just a temp sensor, and it's designed to warn you to not do things like park in long grass.   If you've been pushing the motor a bit, it can cause the light to come on.   Second if the cat is rattling, I'd suspect it's not blocked, but instead falling apart inside.   The easiest "fix" until you can get a cat put back in, is to unbolt your one, bash the rest of the insides out, and then bolt it back in.   For a daily driver/street car, I am in agreeance of put a cat in the car. If it were race car I wouldn't care if it were removed.
    • No worries at all 🫡 I think the most satisfying things to make are the little bits that are just impossible to find or they're no longer manufactured. Generally I always try to replace parts with OEM wherever possible. This little project is also great because it'll never see the light of day, but strengthen these brackets so it's not just relying on the little standard screws in the headlight plastic. As soon as I saw the standard brackets and screws I thought, "well I'm not going to install with just the screws, the plastic tabs will just snap off". It's crazy how expensive everything has become yeah. But I suppose that's supply and demand; granted it's a lot easier to get brand new genuine parts these days which is fantastic 😊, I don't have to get totally reamed at the local Nissan dealer ha ha We sure are lucky we have all these manufacturers making parts these days, a few really great Australian companies too like Platinum Racing Products and Fit Mint Automotive, what a time to be alive ❤️ . I've got my eye on the RB26 head by PRP as mine has a very fine hairline crack, so that'll need to be addressed some time in the future. If you have any requests or odd things to make feel free to let me know and I can have a crack at making replacement parts ✌️
    • Thanks for sharing this, and BTW if your headlights are in good condition they are worth thousands....you might want to consider replacing them with brand new LED ones like this (https://www.nengun.com/78works/full-led-headlights-r32-skyline) and making enough profit to buy a house in Sydney
    • I'm not sure what sort of shops are nearby, but I'd expect any reasonable exhaust shop could put a cat in it that will not restrict the power that engine makes. Otherwise, if you want to remove it, short lengths that replace the cat are readily available online, search for "de-cat pipes" or "test pipes"  
    • Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
×
×
  • Create New...