Jump to content
SAU Community

Recommended Posts

Does anyone know which R32 front suspension bits are the same as the s14 200sx.

Does anyone know which S13 front suspension bits are the same as the s14 200sx.

Friend knackered the 200 so I need parts cheap.

anyone with any contacts or anything let me know

Riaz

IceyG@firedream.net

Link to comment
https://www.sau.com.au/forums/topic/10217-help-again-all-r32-owners/
Share on other sites

apparently just brakes and thats about it. but dont qoute me on that though, i havnt really played with 200's that much and to be honest, i dont want to. theyre missn two cylinders and have that dreded rattly timing chain, YUK!

haha great guys, lacking a bit on the info

Blind Elk. I own a 200 and a R33 friend went for a drive knackered it, I NEED PARTS COS I GOT TO FIX MY CAR

friend will have to pay but still its a friend so the cheaper/less he has to pay the better for everyone

IF ANYONE HAS ANY INFO ON THIS PLEASE PM ME

thanks

  • 2 weeks later...

If they are the same, I have R32 front uper wish bone and wheel hubb assembly plus stock shockies (no brakes rotors, or lower wishbone) you can have cheap. What I can tell you is that a S13 I owned had completely different front end to the Skyline I think it was a strut type setup, but most definately differnt.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • Should have asked what is the car?
    • I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
×
×
  • Create New...