Jump to content
SAU Community

Recommended Posts

Do the motor registry and/or Police take notice of these "engineers certificates" ?

I went through the pain of getting my vehicle over the dickson pits and registerd just before I did the motor in (3 visits). As rego is expensive I asked a lady at the registry that if I cancelled my rego (cash back) and the car was off the road for less than 12 months would I have to go over the pits again. Answer NO.

Truth turns out to be YES. Now I'll have to do a shit load of visits and depending on the mood and the guys on at the time I am sure I'll get a reaming.

Edited by Sinista32
Truth turns out to be YES. Now I'll have to do a shit load of visits and depending on the mood and the guys on at the time I am sure I'll get a reaming.

Oh Sin, I'm sure you'll bend over backwards for him.....

Do the motor registry and/or Police take notice of these "engineers certificates" ?

No they dont. Police can issue a defect notice for a stock standard car if they wish, its your job to take it to Dickson and get it cleared.

And on that note, Dickson can also reject engineer certificates if they still believe the car does not meet ADR's.

And MYSHY, all 15 year imports have to be engineered to get rego. Cars that came in under a compliancing scheme like mine and sinista's dont have to have engineering certificates for registration (thats what the compliance plate is for).

Nik, have you ever heard of Dickson rejecting an engineer's certifcate before?

If you have, do you know for what reason?

Yes I have, was on an imported car with Blitz technospeed wheels. The engineer had issued a certificate saying it was safe etc ok. Still didnt change the fact the wheels were more than 15% larger in rolling diameter than factory, which meant they were not ADR compliant, and hence rejected.

I was talking to a guy from the Northern Territory at the nats. He had a VL commodore with a RB26 in it. I asked about engineering and he told me he didnt need it! He said that up there, its all done on displacement. So technically going from an RB30ET to a RB26DETT is a DOWNGRADE!

I dont know if he left out any info but if thats true im going to retire to the NT!

Edited by noakespg

Amaru. yes you are correct about the 15 year rule if your car is modified in any way but not if your car is standard you dont need an engineer

you can do all the work yourself and get the side intrusion etc put in and checked

Mainly just saying that you can get anything engineered, but the cops can still anything they want to your car :D

Nik, have you ever heard of Dickson rejecting an engineer's certifcate before?

If you have, do you know for what reason?

They rejected my engineer's certificate, actually. They said the certificate mentioned "two seats" when obviously the car had four. It took a phone call from the engineer to say "yes it says two seats on that line, then on the next line down it says 'and another two seats'". :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m doing some side developments on SR20det S13 engines, its one my hobby cars used it to compare flow capacity of some smaller size wheels. SR20det is one of another JDM legendary engines I'm sure there are plenty of SR enthusiasts on this forum, I will share results some common turbo configurations here. a quick run down of what the car is: Wide body 180sx Type X with black top engine (blue). It has: Stock bottom end Haltech 1500 ECU 5-0 motorsports trigger kit Kelford SR20DET Beehive Spring with Titanium Retainers Kelford Cams SR20DET S13 188-B 268/272 Cams G25-660 Turbocharger in T2 .64 rear housing internally gated ARP Head studs MLS head gasket 1000CC ID injectors Walbro 450L Fuel pump Front mount cooler kit JJR’s 3 inches turbo back exhaust (its too short for the 180sx it had to be extended) Pump 98 fuel Hub Dyno tune So far made 270rwkws at 22psi full boost by 4500RPM. Engine is very knock limited hence a pretty bad looking top end. From previous experiences it seems like SR20dets are happier with bigger size turbine, some thing like a GT30 would make way better top end, but on same time response is lost. It won't be a problem with S15 VCT engines. I'll be testing alternative turbine housing, turbine wheel and possibly dump pipe options for extra flow to resolve the problem and of course E85 would resolve all the issues.            
    • Awesome writeup and details. Thanks for sharing the story so far. I can relate to parts of it with my previous car and some of the issues I had to deal with.
    • Wow the colour matched hard top completely transforms the car. Are there any nice front lip options for the car or is that off the table?
    • Generally yes but for some reason I've been ruthless this time around!  I might even need to do another tip run after the way I've finally been able to hit the delete button on shit I've stepped over, stepped around and tripped over for the past 10 years!
    • I just quote the Rolling Stones. Paint it black.
×
×
  • Create New...