Jump to content
SAU Community

Recommended Posts

I also use BP ultimate. Can anyone tell me if there is a differance in the BP ultimate between the Gold handles on the pumps and the Blue ones. Am I the only one to notice. When I go interstate I use optimax though. I rang Shell here to ask why we dont get Optimax, they said it was due to the fact that they cannot make enough to supply all of Australia.

Originally posted by Chris32

Ok, seems everyone has had good results with the BP stuff, I think I will try that next time I have to fill up

4door_sleeper, octane booster does a good job of fouling platinum plugs, so for now its just running stock boost

And oxygen Sensor, Cat etc

Originally posted by EnricoPalazzo

Anyone tried the new Vortex GOLD?

it doenst have a RON rating but i filled up with it today at CALTEX

It's a 96RON fuel. Nothing different from the old Caltex premium, just a flashy name to keep up with the times, Optimax, Ultimate etc...

Put 3/4 of a tank of BP Ultimate in, is definatley (heaps) better than the fuel that was in there. Much smoother, and couldn't hear any detonation during some 'test' runs up thru the hills (did the same run as when i thought it detonated a few times)

Is definatley smoother mid to top end, and doesn't have as much shit come blasting out of the exhaust. Does tend to pop a bit under decel. but I can live with that

Might try it with a bit of toluene in it, but I will wait and see

roll on Autumn - I can't wait for some cool but dry weather:D

chris

I use either Mobil or BP with same results - my car doesn't seem to be fussy. I have also on a few occasions used Caltex Premium and it is :

1. ALWAYS cheaper (cos they guarantee only 5c/l price above unleaded) and

2. I seem to get a tiny bit better fuel economy from it too!

Fortunately even though I have turned up the boost to 13psi and still have the same cooler - I have never heard pinging from my SR20 .... however in 32degrees + weather I turn the boost back down to about 8psi, just in case!

Matt :) .... I am a big girls nightie - not a blouse :) .... you know its cos I don't have a decent cooler, poof! ;)

Which reminds me .... if anyone hears of a good cooler for sale can they please drop me a line?

Syn 8000 and Bp Optimax are the go. Dont put shit fuel in Performance cars. Or get a purple Chrysler on LPG. Least i dont have to wory about Oxygen sensors and computer tuning. 58 heater hose and a good ear is good for 12`s. Anything fuel injected can be tempramental with diff fuel sources. Oi Andrew u should try some Halo plugs in ya beast. the will help any combustion probs :]

http://www.halosparkplugs.net/r.cgi?test-AB1188

http://www.haloplug.com/

i reckon these might be a good thing for Munros Skyline but its his - Marks call on that one. They r around $30 each methinks from memory. Needs ECU reset if applicable.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This piece is obscenely discontinued. I honestly hate the frameless window design because the rubber gets stressed and the guides as well every time you open and close the door.
    • I wouldn't be concerned at all, other than to suggest having them flow tested when you receive them to confirm they are reasonably similar, and then put the highest to lowest flowing ones in cylinder 6,1,5,2,4,3
    • I’m only posting this cause I thought I had seen a bad review on these somewhere before. Any feedback? Would you guys recommend that if I do buy these I send em to RC to have em checked before installing. Or any other suggestions?   https://www.ebay.com/itm/114009965865?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JDl-15yLQ8C&sssrc=4429486&ssuid=QTzlFXB1S-S&var=&widget_ver=artemis&media=COPY
    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
×
×
  • Create New...