Jump to content
SAU Community

4+6 Point 3" Harnesses - Fai Approved - $329


Recommended Posts

1. abcent - Black, 4 Point Motorquality harness - CONFIRMED

2. Rowdyr32 - Black or Red, 6 point Motorquality harness - CONFIRMED

3. KamikazeR33 - Black, 4 Point Motorquality harness - CONFIRMED

4. 9krpm - Black, 6 Point Motorquality harness - CONFIRMED

5. Bass Junky - Black, 4 Point Motorquality harness - CONFIRMED

6. gadg/ Let Me Drive - Black, 4 Point Motorquality harness - CONFIRMED

Hi Guys,

Meridian Motorsport is able to offer the Skylines Australia the following group buy special on the MotorQuality brand 4 & 6 point, 3” race harness.

The MotorQuality harnesses are manufactured from high quality Italian components & feature a traditional aircraft style rotary turnbuckle with offset tangs on top webbing for increased driver comfort.

They are available in red, blue & black.

All harnesses will have a 5 year FIA life

The recommended retail for the 4 point 3” harness is $399 & $435 for the 6 point.

Group buy price of $329 for the 4 point & $365 for the 6 point harness -

Minimum group purchase of 5 harnesses, colors to be specified at order.

I will take control of this group buy and at this stage please only post if you are want one or have questions (no other crap posts please) Please post colour required. We will not do anything till we have a group of at least five. If we get more, then I will go back to Meridian for a cheaper price.

Also ERG Harnesses are avaliable. I believe these come out of the same factory as Sparco ones and are an exact copy.

4 point retail $359, group buy $324

6 point retail $399, group buy $360

Thanks, Chris.

post-6928-1137635322.jpg

post-6928-1137635365.jpg

put me down for a Black MotorQuality 4 point harness!

might be a stupid question, but do they come with a "how to install" guide, want to know where its best to anchor them from? ie/ the rear parcel shelf?

Not sure which one would be the best one to go with. I would think that their isn't going to be much difference in quality at all. Both have 5 years FIA stadards attached. I have a ERG one and it's good.

They are pretty easy to install. They just come with some eyelets that are threaded the same as you existing seatbelt bolts. So you just unscrew the existing seat belt anchor bolts and screw these in as a replacement. Then it's just a case of hooking the ends of each belt to the eylets. Which is a clip on/off belay setup similar to rock climbing gear. The top harness belts attach to the rear passenger seat bolts between your rear seats. So the beauty of the setup is that you can still keep your exising belts and have no problems removing and re-installing at any time. A few of the vic guys have these already, so we can show you how we did ours. This is the case with the four point setup in a standard street trip vehicle anyway. Obviously if you were running a cage, or other strut bars, or 6-point there is additional work and you should probably consult a CAMS scrutineer at a minimum.

The other good thing about these are they bolt into the standard ADR approved seat belt mounts, so you know these wont just let go, and have been crash tested.

Just spoke to tony before. He said the erg harnesses are made in an asia country ( I can't remember which one) and he recomended the motorquality harnesses since the are made in italy.

Chris put me down for a 6 point harness by motorquality. He said there are heaps coming. Can I specify colour later. Can't choose between black (inconspicous?) or red for rice.

Those pics dom't show how:

The top harness belts attach to the rear passenger seat bolts between your rear seats.

Could someone post these pics because I'm interested.

No go on those photos?

See here: http://www.skylinesaustralia.com/forums/in...0entry1882711

Post # 49 - Matt has provided photo's of how most of us have setup our harnesses.

My suggestion is to seek expert advise from a qualified CAMS scrutineer (or Meridian) as to your individual setup, as safety is of the highest importance. Many people have raised valid questions to the validity of some installation methods. I personally will stick with the installation setup as shown in the photo's, as this works for me.

These racing harnesses are all FIA approved. No 4/6 point harness are ADR or dotars approved for use in a street car – legally you have to use your lap sash on the street – no exceptions. You can have the 4/6 point fitted to the car, but legally you have to be using the lap sash as well.

don't suppose these are ADR approved?

We need one more person for this group buy to go ahead.

1. abcent - Black, 4 Point Motorquality harness - CONFIRMED

2. Rowdyr32 - Black or Red, 6 point Motorquality harness - CONFIRMED

3. KamikazeR33 - Black, 4 Point Motorquality harness - CONFIRMED

4. 9krpm - Black, 6 Point Motorquality harness - CONFIRMED

5. Bass Junky - Black, 4 Point Motorquality harness - CONFIRMED

6. gadg/ Let Me Drive - Black, 4 Point Motorquality harness - CONFIRMED

As soon as we get a fifth person we will go ahead. If your sure you want one pete let me know and we can go ahead.

Has everyone else got funds and still commited? Please PM me if your ready to go. Once I have five PM's I will reply with account details. If you require shipping please let me know that your are not in Victoria. PM me with your address and I will calculate shipping.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I like it when the counter chick leads you out the back into the racks and says "have a grub around in here and see if you can find what you need. I'll be back in a few minutes. Just left me in front of a massive motorised shelving system and 2-3 million fasteners, so I could find a peculiar SS shoulder bolt with cap head. Gotta love country towns.
    • I used this https://osgiken.com.au/product/os-giken-os-250r-lsd-gear-oil-80w250-1-litre/   shut my nismo 1.5 pro up by heaps…. Not silent though. Gives the car character and personality. It ain’t a carolla. If you want silent, put a quaife in it.
    • It's about the same time for me from Bunnings, or the Fasteners. My big push away from takeaway food, and gluten in general keeps me away from the Bunnings Snags too! Weather up here, I've been out for two walks today in the beautiful sunshine. Had a few little drizzles, and some wind, that honestly, a tin of beans and I could compete on how harsh she blows Thankfully, being this bit inland, we're not getting anything much really. Will probably pick up a bit more when/if Cyclone Alfie decides to come ashore. A few areas in the GC though, and south into NSW are really getting smashed though! Right now, I'm just annoyed Alfie hasn't hit, as I'm not allowed to crack into the BBQ foods like the bacon and eggs until the Cyclone hits "In case we lose power"...
    • I love fastener joints, the price difference between them and joints like Bunnings or Super Cheap is amazing, and they either have exactly what you want, or they can get it to quick They have even given me some for free when I only needed a couple of specific size In saying this, I have paid premium for fasteners from Bunnings if they have the sizes I need, but only for convenience really, as my local is only 10 minutes away, the Sushi joint near them is also a consideration  How's the weather Matt? Stay safe mate
    • Wideband is worth setting up if only for tuning purposes. I would not mess with the ignition system unless there's a misfire. HKS crank trigger is popular out here for the relatively easily sourced Denso crank sensor, not a bad idea to install as well regardless of power level on a standalone. Boost leak test is worth thinking about. Oil pressure sensor tied to a fuel cut isn't a bad idea either. Getting the tune figured out is a good idea. Without putting eyes on it and getting under it there's no way for us to tell you exactly what it needs but most likely you're down to the last 10% that will make a big, big difference in how happy you are with the car.
×
×
  • Create New...