Microtec Lt8x

[R33A31]

I has 1 unit Microtec LT8x strip from my Evo3 engine. I read the artical from calaisturbo.com that MT8 & LT8 can run for RB engine. If possible Can I get the scatch of the wiring digram on this.

[SLIPPERY]

they should have the diagram at www.microtechefi.com

click on the 'downloads' tab and you should find it under 'wiring diagrams'

ive used an LT8 on an RB with no dramas

[RACESPEC]

they should have the diagram at www.microtechefi.com

click on the 'downloads' tab and you should find it under 'wiring diagrams'

ive used an LT8 on an RB with no dramas

<{POST_SNAPBACK}>

You can use the LT8S on the RB, but you will need to group 2 sets of Injectors together, as the LT8S only has 4 Injector drivers.

The Plug and Play unit is only available in the LT12S format, as they have 6 injector & ignition drivers

Thanks

Tarek

RACESPEC

[R33A31]

Thanks

[R33A31]

I'm manage to d/load the injector o/put digram but confuse with the ign. digram due to my engine inj. driver ( RB25det S2).