Jump to content
SAU Community

Recommended Posts

I picked up a Autosalon magazine the other day (I was bored and had read HPI) and noticed that they are going to have a circuit battle set up like a glorified club super sprint.

Basically the rules don't allow full slicks but semis are fine. Cars don't have to be registered but have to maintain there standard chassis. Modifications to the engine are unlimited and suspension modifications permit changing springs, shocks, swaybars, radius rods, control arms etc

The way the competition works:

One car on the track at a time with an inlap, timed lap and then cool down lap. So you only have 1 lap to set a good time per outing onto the track. I imagine it is going to take ages to get through the cars with only one person on the track but I hope they they have thought about that.

The latest magazine with a riced up rx7 s6 on the front has the application form. It would be a pitty not to have some talent from skylines australia attending...

I think the most hilarious part of the day will be when all the riced up turbo swifts and the like turn up thinking there car will fly and then it overheats and blows up on the first lap or the cut springs fall out around a corner and their candy paint job gets dirty... (or worse)

If some others attend I will take my s15.

Common Duncan and Fatz bring on the improved production GTR's. You just need a couple of Nismo stickers as well as a TRD and mugen and you will fit right in.

James

Link to comment
https://www.sau.com.au/forums/topic/102617-autosalon-circuit-battle/
Share on other sites

  • Replies 503
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

The image in the background appeared to be wakefield but given the fact that "autosalon" is national I imagine they will run it round the country.

This is all speculation though. So far the magazine has said there is going to be a circuit battle and given the rules and regulations as well as an application form.

Edited by nfi
Guest Mashrock
I picked up a Autosalon magazine the other day (I was bored and had read HPI) and noticed that they are going to have a circuit battle set up like a glorified club super sprint.

Basically the rules don't allow full slicks but semis are fine. Cars don't have to be registered but have to maintain there standard chassis. Modifications to the engine are unlimited and suspension modifications permit changing springs, shocks, swaybars, radius rods, control arms etc

The way the competition works:

One car on the track at a time with an inlap, timed lap and then cool down lap. So you only have 1 lap to set a good time per outing onto the track. I imagine it is going to take ages to get through the cars with only one person on the track but I hope they they have thought about that.

The latest magazine with a riced up rx7 s6 on the front has the application form. It would be a pitty not to have some talent from skylines australia attending...

I think the most hilarious part of the day will be when all the riced up turbo swifts and the like turn up thinking there car will fly and then it overheats and blows up on the first lap or the cut springs fall out around a corner and their candy paint job gets dirty... (or worse)

If some others attend I will take my s15.

Common Duncan and Fatz bring on the improved production GTR's. You just need a couple of Nismo stickers as well as a TRD and mugen and you will fit right in.

James

if i can get my bad circuit racing monster ready in time i was really thinking of doing so.

what a load of crap, they couldn't make it with drag combat events so they're trying this

what next....i bet they will promise to back a National series of this.....only to pull out after all cars are built and money+time invested....[cabin]

Yeh, love to know what entry will cost. All for one lap...and looking at how the Drag Battle thing went, and who can forget the last time they tried to put on a gig like this... I will gladly keep my money in my pocket.

That said if Mark is in the Camry, ill be sure to bring the vid cam :(

Picked up the magazine again and had a look at the application form. They are actually being picky with who goes in the competition. They are giving more competitive cars preference. You have to fill in what modifications your car has to the engine, suspension, wheels and tyres and body.

By the look of it you will get more than 1 session which is good. eg. You will go out and do the warm up lap, timed lap and the cool down lap and then wait for your turn and do it again so it is not as bad as I thought.

I couldn't find anything on price though. I guess they thought it was irrelevant... ;)

Well for those of you that can't read it's free to enter.

Infact they will provide an "allowance" to cover costs for competitors to get to the event so it won't even cost you anything to get there and back.

My application is going in. I've been dying to show those NSW boys how to drive a GT-R.

:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I mean, if you were to move the jacking points away from the original location, that is, away from the wheels and closer to the centreline of the car, then it will be more likely to overbalance and tip off the supports. Same as we talked about before. I was talking about moving for-aft. If the sill is bent outward or inward, then the car would obviously look unstraight from the outside. Hopefully that hasn't happened either. Again, you can do comparative measurements from the chassis rails to see if there is much deflection.
    • Can you elaborate what you mean with your first sentence? I meant move as in the bulge kinda seemed like it got pulled "outward" meaning it got pulled down and to the side with the jacking rail itself, so the load bearing bulge now sits lower than usual and is not level with the sill on the other side of the jack point. Either that or the jacking rail just got pushed in a good bit.
    • As well as being risky WRT tipping off anyway. Yeah, I wouldn't expect it to move. Just measure from the rear one to the front one on the good side, then measure that same length on the wrecked side. You will find the notches in the pinchweld, and the jacking pad. Just spray a spot of marker paint or something there.
    • but any other area than the bulge you are talking about will just cave in then? The front driver side is pretty bent so I don't know if that will work the way it is now. I can still kinda make out where that bulge is/was but it looks like the position of it also changed due to all the mistreatment? Hard to tell
    • Absolutely. Look very closely at the photo (of yours) that I took my second snip of. See how the sill is thicker material right behind the pinchweld, where the two notches are? That is the factory reinforced area for lifting. That pad is supposed to carry the weight. The factory jack (go look at it, and how it interfaces with the car at the pinchweld) shows you exactly how the load is carried from the car to the jack to the ground.
×
×
  • Create New...