Jump to content
SAU Community

Changing The Diff On A R33 Gtst

rob1981
 Share

Recommended Posts

LO_R33 Proficient

LO_R33

Posted
Posted

Its easy, Jack the car up and put some car stands under it.. have a bit of a look. Unbolt 1/2 of the tail shaft first... then unbolt the flanges either side of the diff (there will be 5 bolts)

Once you do this, Look at the back of the diff, and there will be 2 bolts, unbolt them. The diff will still sit in as there is 2 more bolts supporting it up the front. Un-do this bolts, but dont completly undo them, then if your strong enough, hold the diff into place with one hand, and undo the bolts with the other hand, and slide if foward. The diff will then come out... and your done. Hope this helps

Its really easy

Dayne

R33S2 Grand Master

R33S2

Posted
Posted

I put the stands on under the chasis rails behind the diff area mine go quite high so it was about a meter off at the back. first remove the exhaust pipe, mine had a flange just in front of the diff and then remove breather, then, with hand brake on, loosen all the bolts on the drive train (5 each side of the diff and 4 on each end of the 1/2 tail shaft) I took off the bracket that crosses under this shaft to make it easier to remove it, and remove 1/2 shaft. Then the 2 bolts at the back are really hard to get at, I ended up putting the socket on the nut then putting the extension in to undo them and when you get to a certain point take the socket off and undo by hand cause you cant get the nut out with the socket on it!!! then I put a jack under the diff undo the fornt two bolts and push it forward while lowering it. Getting it back in is tricky but not difficult if you have some to help, I didnt and it took 3 goes. Rassemble is not complicated as the parts are self aligned. If you need any more help PM me.

Terry

  • 7 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • silviaz
      A little PU bush story

      By silviaz · Posted

      I'm keen for this content to 😂
    • nzstubbies
      Wanted R34 GTT Wheel Caps

      By nzstubbies · Posted

      Hi All, I'm based in Sydney and want to get hold of 4 stock R34 GTT wheel caps as pictured. Cheers
    • R3N3
      Need AC Compressor for R32

      By R3N3 · Posted

      Haha im flattered! Although my poor boat is collecting dust in the garage, as it hasn’t been driven in like 6 months. I forgot the to put the trickle charger on too, so the battery is likely toast now.. I have the frenchys kit. It is fantastic. My only gripe was that the hard lines from the firewall needed some tweaking, however, this was mainly due to my specific turbo and dump combo. The weight and size packaging is much nicer too. I think I have some pics on my build thread somewhere.. my justification for the kit was more “why not” I had gone to the trouble to modernise just about every other part of the car..
    • GTSBoy
      Does 98ron contain ethanol?

      By GTSBoy · Posted

      Actually, ethanol has probably never been cheaper, on a tax free basis, than petrol. With fuel excise being what it is, and only being levied on the hydocarbon component, not the ethanol component, and ethanol for non-drinking purposes not being subject to liquor excise - E85 was cheaper, but not because the combustible liquid itself was particularly cheaper.
    • Murray_Calavera
      Will I Need A Retune After Cahanging My Catalytic Converter ?

      By Murray_Calavera · Posted

      Maybe? If changing the cat to a higher flowing cat, caused the turbo to spool more quickly, and those areas of the map had not been tuned for the boost level it is now seeing, then yes you would need a re-tune. How dangerous it is running without the updated tune would depend on how far out the tune is with the now higher boost levels, how the engine protection has been setup, is the ECU compensating with a wideband sensor, is the boost control closed loop blah blah million other things... But yeah having said that, I wouldn't be surprised if changing out the cat for a high flow, in say a full 3" exhaust, made no noticeable difference at all. 
×
×
  • Create New...