Jump to content
SAU Community

Recommended Posts

hi there all. just thought this new post might be a good guide for others out there who are looking for approximate power gained from mods done to our cars. may it be a simple air filter or manual boost controller, to an all out rebuilt motor or T88......if you have one :( ..hahah

well i guess being the first to start this new thread off, i'll start with what i have. don't ask me about the power though as will be getting a pfc soon to go with new engine :(

- turbo back TRUST exhaust

- Hybrid/Calsonic Front mount (miniature type haha)

- Mines ECU

- Turbo Dynamics turbo (Don't know rating or the A/R ratios sorry)

- boost controller (hose clamp :( hahahhAHAHHA)

...no idea what these mods will give me in power, so how bout an estimate aye people? <_<......i was hoping for around 180kw atw at this stage of time. not sure about my injectors or anything else. pretty much got a motor, threw it in, and drove away.

i am in the process of sticking in a new RB25DET NEO :lol: into my car instead to see if the valve timing will alter anything. perhaps fuel economy?

was reading up the ECU tuning threads, and seems as though that tuning a PFC will lean to the $450-550 mark. is that about right?.....i live in sydney, so not sure whereabouts to get the tuning done, but seems as though HITMAN does a good job for decent pricing aye? coz im might also get a T03/04 turbo as well, so not sure what to do at this point in life..sigh:(........i hate being stranded on money with so much on the "to-do" list....oh ..chinese new year..heahe...red pockets please? :D

so if everyone can just state mods and current power, as well as state of tune that'd be greatly appreciated!

Link to comment
https://www.sau.com.au/forums/topic/102968-power-we-are-making/
Share on other sites

  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

My car is getting tuned tomorrow after some serious work has been put in.......estimating just from now anywhere between 330-380rwhp :) So to answer your question in kw thats high 200's??? hahaha I dunno

^ 261rwkw with a GT-RS.

that looks like 17-18psi on the chart then it drops off a bit, is that about right?

I made 230-240 at 15psi with pretty much the same setup.

anyone know if internals are safe at 18psi? if so, might ramp mine up a bit :D

nice one.

Edited by Beeble

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi all! Looking to relocate the battery to the trunk of an R34 GTT. I want to do it using as many stock GTR components as I can (including the harness protectors from the 34 GTR that run underneath along the chassis to the engine bay). So far I’ve purchased the battery tray from a 33 GTR, as the captive weld nuts are already there just asking to be used. There is also the slight issue of now having to relocate the ABS/TC/Fuel Pump Control ECU, which in GTT’s sits right above where the battery will then sit on the tray. Has anyone already achieved this, and if you have any pics that you wouldn’t mind sharing? It would be great to see how others have done it and where you put them, as there are countless holes in the parcel shelf panel to potentially use. Just trying to get some ideas bounced around, and to help uncover any potential problems I may encounter by  my choice of location. TIA for any help!
    • Brand was ard.   I also threw a brand new battery at it and beefed up the wire from the alternator to battery and added an extra earthing point from the battery 
    • Evening all,       I'm replacing some bolts on my RB25 with probolt Australia bolts.       Does anyone know the following, m5 m6 etc 10mm 20mm etc       Coil cover   Cam covers   Plazamaman fuel rail   Front cover (timing cover)   Etc   Any help would be awesome   Or any lists anywhere
    • Evening all,   I'm replacing some bolts on my RB25 with probolt Australia bolts.   Does anyone know the following, m5 m6 etc 10mm 20mm etc   Coil cover Cam covers Plazamaman fuel rail Front cover (timing cover)   Etc   Any help would be awesome Or any lists anywhere
    • $350 for a skid pan is a joke, cost of living is definitely more in NSW 😂
×
×
  • Create New...