Jump to content
SAU Community

Recommended Posts

Hi all,

Getting on the track for the first time next month, got a couple of questions

What sort of helmet is best?? I would think open faced, and they need to be ADR approved right? and motorbike style helmets, just they'res some nice open surfing helmets etc.. on ebay. Where do you buy them from?? any other places than motobike shops (who charge an arm and a leg).

was thinking something like this:

http://cgi.ebay.com.au/Excellent-Black-ARA...1QQcmdZViewItem

Searched for tyre pressure and could only find one post where they said 40psi is best - i have hankook k104 235/45/18s on the front and falken ziex (yes crap i know) 265/35/18s on the back.

Any other advice for a track noob??

Cheers :D

Link to comment
https://www.sau.com.au/forums/topic/103019-first-time-trackday/
Share on other sites

Hi all,

Getting on the track for the first time next month, got a couple of questions

What sort of helmet is best?? I would think open faced, and they need to be ADR approved right? and motorbike style helmets, just they'res some nice open surfing helmets etc.. on ebay. Where do you buy them from?? any other places than motobike shops (who charge an arm and a leg).

was thinking something like this:

http://cgi.ebay.com.au/Excellent-Black-ARA...1QQcmdZViewItem

Searched for tyre pressure and could only find one post where they said 40psi is best - i have hankook k104 235/45/18s on the front and falken ziex (yes crap i know) 265/35/18s on the back.

Any other advice for a track noob??

Cheers :)

An open face helmet will be fine if that is what you want. I use an open face Arai because I get claustrophobic in a full face helmet. It should be to the relevant Australian Standard (or an FIA standard such as SA2000 or just recently SA2005). See schedule D of the CAMS manual for a full listing. They don't have to be very expensive, but remember cheaper usually means heavier & in an accident heavier means more damage to your head. Depending on how serious the event is you may need such things as a level 2S CAMS license. No big drama.

Most important thing to remember is - HAVE FUN. Most people suck really badly when they first start - it is only by practising that you get better. Look after your car - particularly your brakes & if others are coming to overtake you stick to you line & allow them to go around. It works much better that way. So enjoy yourself, talk to your fellow competitors & if possible follow someone around the track who has been there before and knows which lines to take through the corners.

Edited by djr81
  • 1 month later...

You think you may know the lines, but you wont. Follow someone else who is doing well and over taking everyone and just try and stick to their line. If you can mimick them it will give you a starting point on the what line to take. I found that the best way to get a descent start on my first race meet. Last race of the night i ended up coming 5th outta the 20 odd cars. Thought that was pretty good for my first time racing. First two race were shit house though, came like 14th and like 11th. So dont expect too much of yourself.

Enjoy it. Its great fun.

I race a white r33 with a really lame sticker configuration on it which my father chose. Gold rims. Might see ya around sometime.

re helmets go closed face if you can, some operators won't let you use open faced, and if yuo even drive an open car you wont be able to use an open faced helmet either.

The most important thing about a helmet is whether it is comfortable or not....so pay the extra, go to a bike shop with a big range and try on everything until you are happy. They need to be snug but not tight and if you wear them fir a while yuo will feel the difference in shape some are really uncomfortable for some heads.

Tyre pressures...with road tyres keep them nice and high, between 40 and 45 hot. The 326s are shit and will ruin your fun for the day, so when you buy new tyres buy something decent it makes an amazing difference.

Other advice...same as r33_racer.....road driving habits are no good on the track, when you are out for yuor first time you will brake way too early, turn in to the corner way too early and go thru the corner way too slow....ideally you should take the time to go out with someone who knows what they are doing you will be amazed how different the right lines are to what most people take.

And take it easy at first, you car is a road car and will overheat - oil, brakes, tyres. If you want to stay out there do 3-5 laps then 1-2 slow laps, then back on it again. Keep an eye oil temp and water temp.

And take a break it is hard work and when you are tired you make mistakes :)

And enjoy!

And take it easy at first, you car is a road car and will overheat - oil, brakes, tyres. If you want to stay out there do 3-5 laps then 1-2 slow laps, then back on it again. Keep an eye oil temp and water temp.

such a good point. i used to always try and be the enduro hero and do all laps in the session. it's not always a good idea as you will just wear out your car that much quicker. you car may only last 2 10 lap stints but could have lasted 5 or 6, 5 lap stints.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I think you're really missing the point. The spec is just the minimum spec that the fuel has to meet. The additive packages can, and do, go above that minimum if the fuel brand feels they need/want to. And so you get BP Ultimate or Shell Ultra (or whatever they call it) making promises to clean your engine better than the standard stuff....simply because they do actually put better additive packages in there. They do not waste special sauce on the plebian fuel if they can avoid it. I didn't say "energy density". I just said "density". That's right, the specific gravity (if you want to use a really shit old imperial description for mass per unit volume). The density being higher indicates a number of things, from reduces oxygen content, to increased numbers of double bonds or cyclic components. That then just happens to flow on to the calorific value on a volume basis being correspondingly higher. The calorific value on a mass basis barely changes, because almost all hydrocarbon materials have a very similar CV per kg. But whatever - the end result is that you do get a bit more energy per litre, which helps to offset some of the sting of the massive price bump over 91. I can go you one better than "I used to work at a fuel station". I had uni lecturers who worked at the Pt Stanvac refinery (at the time they were lecturing, as industry specialist lecturers) who were quite candid about the business. And granted, that was 30+ years ago, and you might note that I have stated above that I think the industry has since collected together near the bottom (quite like ISPs, when you think about it). Oh, did I mention that I am quite literally a combustion engineer? I'm designing (well, actually, trying to avoid designing and trying to make the junior engineer do it) a heavy fuel oil firing system for a cement plant in fricking Iraq, this week. Last week it was natural gas fired this-that. The week before it was LPG fired anode furnaces for a copper smelter (well, the burners for them, not the actual furnaces, which are just big dumb steel). I'm kinda all over fuels.
    • Well my freshly rebuilt RB25DET Neo went bang 1000kms in, completely fried big end bearing in cylinder 1 so bad my engine seized. No knocking or oil pressure issue prior to this happening, all happened within less than a second. Had Nitto oil pump, 8L baffled sump, head drain, oil restrictors, the lot put in to prevent me spinning a bearing like i did to need the rebuild. Mechanic that looked after the works has no idea what caused it. Reckoned it may have been bearing clearance wrong in cylinder 1 we have no idea. Machinist who did the work reckoned it was something on the mechanic. Anyway thats between them, i had no part in it, just paid the money Curiosity question, does the oil system on RB’s go sump > oil pump > filter > around engine? If so, if you had a leak on an oil filter relocation plate, say sump > oil pump > filter > LEAK > around engine would this cause a low oil pressure reading if the sensors was before the filter?   TIA
    • But I think you missed mine.. there is also nothing about the 98 spec that supports your claim..  according to the fuel standards, it can be identical to 95, just very slightly higher octane number. But the ulp vs pulp fuel regulations go show 95 (or 98), is not just 91 with some additives. any claim of ‘refined by the better refineries’ or ‘higher quality fuel’ is just hearsay.  I have never seen anything to back up such claims other than ‘my mate used to work for a fuel station’, or ‘drove a fuel delivery truck’, or ‘my mechanic says’.. the actual energy densities do slightly vary between the 3 grades of fuel, but the difference is very minor. That said, I am very happy to be proven wrong if anyone has some hard evidence..
    • Hey guys I’m chasing a Rb20det complete or bare block need a good running engine as mine has low comp 
    • You're making my point for me. 95 is not "premium". It is a "slightly higher octane" version of the basic 91 product. The premium product that they want people to buy (for all the venal corporate reasons of making more profit, and all the possibly specious reasons of it being a "better" fuel with nicer additive packages) is the 98 octane stuff. 95 is the classic middle child. No-one wants it. No-one cares about it. It is just there, occupying a space in the product hierarchy.
×
×
  • Create New...