Jump to content
SAU Community

Recommended Posts

1989 r32 gtst auto

standard everything apart from:

2.5"slipt dump pipe

full 3" exhaust

cheap as pod filter (no cold airbox or heatsheild)

600x300x76 FMIC with 2.5" piping

stock boost

139.7rwkw

jdyno.jpg

Edited by nizmo_freek
  • 2 weeks later...
  • 2 weeks later...

1989 R31 Skyline

Stock R32 RB20det

202rwkw at 16psi

HKS GT2535 turbo

3inch exhaust

Apexi PFC

Apexi pod

GTR injectors

Nismo fpr

Bosch 040

GTR cooler

Profec B

HYPER31271rwhp.jpg

Edited by R31 POWER

Power--------> 299.96 rwhp @ 16 psi

Car ----------> R32 GTS-t (92 model)

Motor--------> Rb20DET (stock internals)

Mods.

Blitz LM Front mount intercooler

Apexi pod filter

ITS Turbo bush bearing core (unknown spec but lag monster.)

RX-7 550cc red top injectors

Full 3" turbo back exuast with high flow cat (xforce)

Sard oil catch can

Z32 AFM

Stock ecu with personal tune/remap.

Bosch 040 intank pump.

Boost starts at 3k and doesnt hit 14 psi till 6k.

Gtes the kick in the back at 4.5k.

A/f ratios were 11.8 after 4.5k.

I have run it at 20psi without fueling(a/f around 11.4) or detonation probs on and off for the last 12 months but have not had it on the dyno for that amount off boost yet so I have no idea on power but it scares the hell out of me. HKS GTRS turbo swap to come in the near futuer for more drivability.

1989 R32 gtst rb20

manual with heavy duty clutch

stock internals

gtr fuel pump,stock inj

stock turbo

3' turbo back exhurst no cat

hybrid front mount

manual boost controler set to 15 pound

made 160rwkw

13.7 quater mile on street tyres

1990 R32 GTST

RB20DET stock internals

HKS GT2510 @ 1.3bar

GTR injectors

Bosch 040

standard afm

3inch exhaust no cat

Trust fmic

Tomei Eprom

SAFC2

288 HP @ wheels or 215rwkw

The A/F ratios are a bit suss due to the tomei eprom i think. im hoping to get rid of the SAFC and get a custom

tuned eprom to get the A/F ratio a little better and squeeze a little more out of it.

i will update this post after fitting a more a/f friendly eprom with a full boost reading.. for u jazza ;)

dyno.jpg

Edited by BSK

HR31 Coupe

197.7 rwkw @ 13psi on the UAS SAU Dyno day, stinking hot and humid day

silver top engine swap, R32 gearbox, twin T28 turbos, custom 3" turbo/s back exhaust, 3" high-flow cat, 700hp hi flow in-tank fuel pump, 444cc/min injectors, microtech LT8 (grrr) ECU with handset, turbosmart T piece boost controller (needs to go), custom ceramic coated intake piping (it's black, and coated, so meh), big ass FMIC, 700hp rated clutch, twin pod filters, standard bottom and top end, malpassi fuel reg, fully re-done cooling system (radiator, thermostat etc, all after the dyno run, not like it'd matter anyway) and i can't remember the rest. Might get around to scanning the dyno chart some day

  • 2 weeks later...

91 R32 GTST

dandynos.JPG

Standard RB20DET

Pod filter

3" turbo back exhaust

Adjustable FPR

TD05 small 16g (from mitsu Evo II)

Tial 38mm External wastegate

600*300*75 FMIC

Standard ECU

Standard Fuel Pump

194.5 rwkw @5900 running very lean on 13.5psi

Edited by Adidan

VL Calais RB20DET

Lowmount GT2530

GTR Injectors

Wolf3D V4

Eboost

HKS FMIC

Standard inlet plenum

3" cat back exhaust, 2 3/4 past muffler

180rwkw @ 18psi on 39 degree day in Townsville with conservative tune

Had pulled 199.6rwkw at Rycol but don't have the slip.

Planning on increasing boost to 21psi for a run in July...

post-29571-1149527273.jpg

Stock RB20DET

Only mods are:

3in zorst, no mufflers...

Pod..

Front Mount..

044 fuel pump mounted intank..

EDIT* running 10 pound of boost.. no controller...

no tune..

Pulled 216.5rwhp with a bit of ping ping

Not too far down the track will be fitting IHI RC6 turbo, with cast manifold and ext gate, GTR injectors and a Lumpy Rom... probably Z meter as well.. looking for at least 260rwhp

Oh and pic of dyno readout:

post-20353-1149820942.jpg

Edited by Josh
  • 2 weeks later...

92 R32 Gts-t - Manual

Internally standard RB20DET

* 4" HKS Super Dragger exhaust with 5" tip

* fmic

* k & n pod

* Blitz BOV

* Bosch fuel pump

* Nissan Stagea Turbo

I ran a 13.9 sec 1/4 mile.

243.8HP

She was dynoed at 189HP before the fmic and turbo conversion.

Edited by RB_turbo_bitch

91 GTS-t

- Stock RB20 and computer.

- 450 HP high flowed GCG built turbo.

- FMIC.

- 2 1/2'' cat back exhaust.

- Rx7 fuel pump.

- EBC.

- 11 psi.

Leaning out like a motherf_cker.. (14.3)

Made a massive (jokes) >147.

Will post new results by 07/07, after new goodies are installed....

29.07.06

Ok a bit longer than the 7th, But any hows.

+

- Microtech lt12

- fuel reg

- New pump

Made 210 on 16 and 227 on 19. (RWKW, for you kiddies playing at home)

PURES LIKE A f**kING KITTEN.

MANY THANKS TO SIMON FROM NT

Edited by 32brother

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha actually I did join back then under a different email address,  I couldn't re-activate my account so made a new one! I didn't post much anyway so not missing out on much. Amazing to see how the value of the cars and parts has changed over the years, also ACT section appears to be dead now. 
    • Thanks... It's in pretty good condition overall, probably due to not being drifted/tuned however being a daily driver has taken its toll. Had 100k on the clock when I got it, up to 180k now. Unfortunately it's not 100% dent free, it's got a small dent on FLH side and broken indicator from where I hit a small kangaroo at high speed. If you look at closely at pic #5 you might spot the dodgy trailer light repair my old man and I rigged up as temporary repair! - It's still there due to a combo of needing the car as daily driver and then too lazy/busy to fix properly. I've a couple of other minor accidents accidents as well but nothing major. One required a new front bar and unfortunately the smash repairer ordered the normal gtst one and not the aero bar. Needed the car back asap so just went with it, regretted ever since.
    • I can't believe that anyone is foolish enough to believe that the base maps are for any other purpose than to drive the car up onto the trailer/truck or gently creep it to the dyno. No matter how good they are, they can never be any better than the factory maps**, and only the foolish trust those on a significantly modified setup. **Yeah, yeah. I know there's also the difference between factory maps being fixed to certain injector sizes and MAP/AFM/VE relationships, and the likely aftermarket ECU base maps being better able to handle the sorts of changes that would render a stock ECU dangerous, like different sized injectors. But let's just ignore that for the moment, because the principle is still the same.  
    • I'm shocked, you've owned a Skyline since 2006 and never joined SAU before now! 😮   Welcome, it's much quieter these days than it was in 2006, but lots of very knowledgeable ones lurk around here. I actually think in outage we've forgotten more about Skylines than anyone knows about them today... 😛
    • So it could give us some info. Such as we find out what number they started at, and we know how many of those blocks came before it.
×
×
  • Create New...