Jump to content
SAU Community

Recommended Posts

1992 R32GTSt with rb20det at 140,000kms

4sp automatic

170.4rwkw @ 13psi

mods:

- rb25 turbo (series 2 with nylon compressor)

- HKS cam gears: inlet and exhaust

- walbro fuel pump

- 3" split dump/front

- 3" high-flow cat

- 3" cat-back

- boost controller 14psi

- high-flow air filter in stock airbox

- rb26 cams

- some kind of chipped ecu, not sure exactly what has been changed - this was done before any of hte mods

- FMIC with custom piping

- auto tans cooler

- 2800rpm high-stall (MV automatics)

- stage 2 shift kit (MV automatics)

Dyno graph below

post-2094-1157090601.jpg

1991, r32 GTS-T

Walbro

POD

Turbotech boost controller @ 12psi

FMIC

On DR Drift's dyno got 135.8 kilowatts. Was really lame, most of the 31's at the place beat me and to make it worse, he said my car was running perfect

Need...New...Turbo...

New turbo on so

Walbro

POD

Turbotech boost controller @ 14psi

FMIC

R34 NEO turbo

Remap by DR drift

460N.M. Torque, 170rwkw was highest run, dropped down to 167 because @ 170rwkw it had some minor detonation.

Pretty happy, hitting full boost at 4200rpm, fangs hard through to peak at 5800rpm, comes onto spool at about 3krpm

Edited by r32 gts-turbo

1992 r32 gtst

198.7 RWKW

707.7 N.M Torque

15psi

mods:

- trust tdo5/o6 turbo

- turbosmart 45mm external gate, with screamer

- 3inch to 3 1/2 inch exhaust

- front mount

- 040 fuel pump

- malpassi reg

- safc 1

post-24129-1153042634.jpg

1989 Type-M coupe.

stock AFM

stock fuel pump

stock injectors

stock turbo running around 0.85 bar

3 inch Xforce turbo back exhaust

JJR intercooler 600x300x76mm

KN pod filter

home made cold air intake

142.7rwkw on Dr.Drifts dyno at night at about 15 deg i reckon.

happy with that for minor mods.

1990 R32 gts-t 43000kms

R32 gtr fuel pump

Z32 afm

rb25 turbo s1 (leaking from compressor seal, pretty shagged)

monsta performance FMIC

apexi power intake pod

3" turbo back exhaust

blitz DSBC spec-r

dr drift dyno tune

156rwkw @ 1bar

Edited by salad

HKS GTRS on RB20 in R32 GTS4.

215rwkw at 18psi.

Mods are the usual:

HKS GTRS

HKS Type-S intercooler

Z32 airflow meter

Nismo 555cc injectors

Full 3" exhaust

K&N pod

Dr Drift remapped stock ecu

Bosch 040 fuel pump

Dr Drift boost controller

BTW: BP ultimate is way better than Optimax! :whistling:

The dyno chart shows the difference in response compared to my old R34 GTT highflow. You can see at 110kmh I now have 50rwkw more than before, which is an amazing difference in drivability on the street >_<

gallery_1619_111_139978.jpg

type m 32 gts-t.

3inch trust turbo back, stock cat

walbro 450pump

300zx single turbo huffin 1.1bar

apexi air filter,

trust fmic

made 196.something rwkw, then we backed it off to a better torque curve and made 192. something rwkw, expected e.t at the drags ??????.i would post dyno printout, but i duno how lol

List of engine mods

Apexi air filter

Z32 afm

FMIC

3' dump to 3.5' cat-back

GCG Hi-flow turbo

GTR Injectors

Bosch 040 pump

Sard FPR

Spitfire coils

Turbo smart 38mm gate with screamer (14psi springs)

Turbo smart E-boost2

I asked Glenn at hyperdrive for 300rwhp and after along run pissin around with things here's the result... happy boi, its really not as laggy as the dyno run makes it out to be!

post-7888-1154684098.jpg

1989 R32 RB20det 4spd Auto

115000kms

mods.

K&N panel filter

stock rb25 turbo

r34 side mount cooler

3" combined dump & front pipe

3" hi-flow cat

3 1/2" Jasma from the cat back

$22 boost controller 12psi

SAFC-1 tuned by HITMAN

219RWHP

post-16944-1154756370.jpg

1990 R32 Gts-t

95,000 kms

stock turbo, injectors etc..

FMIC

Pod

3" Turbo back exhaust, hi flow cat, 3" viken muffler

turbotech boost controller

bosch 040 fuel pump

ecu remap by dr.drift

14psi

169.2rwkw

no dyno pic as yet

comming soon

1990 r32 gtst

stock turbo, internals etc.

stock ecu

dump pipe

3inch exhaust

stock cat

k&n pod

stock fuel pump

no tune done that i know of

13psi

165.5 rwkw

very happy with it soon im going to remap ecu and get a bigger fuel pump

Edited by burnsie
  • 2 weeks later...

1992 R32 Gts-t

Stock Turbo, injectors, ECU etc etc

HKS Pod

3" Exhaust

Crappy intercooler (backyarder -> From japan :P )

Turbo tech Boost controller -> 9psi

And very recently installed Bosch 040 (Today :))

= 150.6 rwkw

171.3 RWKW @ 11psi

Standard RB20 Bottom End

RB25 Series 1 Turbo

Turbotech Boost Controller - 11psi

DrDrift Remapped ECU

R34 GTT Sidemount

3" Turbo Back Exhaust (very quiet/restrictive)

K&N Pod Filter with Heat Shield

Walbro 255 l/h Pump

D2 Fuel Pressure Regulator

dyno001.jpg

dyno002.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It only looks tidy, as most of the stuff that was on the whole back wall, is now in the trailer to go to the tip, or has been shoved in my 2.2x2.4m "Spare parts room", and now I can't get to anything in there Ha ha ha I could definitely do with a bit more space, but I'd just end up with your problems I'm going to enclose the car port beside the garage, and move a lot of stuff into it I think. OR... It will be setup as a fabrication area, and the main garage will have parts storage in it. I'm not sure yet... Need some pictures of that big shed you've got with the bikes and Skyline in
    • No. I think it's gone. 😭 I think you can get body coloured ones on eBay so I think I'll get one of those... Or just hang a red ribbon from the hole and whack a TOW sticker next to it.
    • Can't say I've had a bad experience with one on my car, then again it only gets washed once or twice a year... The wheels on the other hand, get a good spray often due to my shitty dusty pads.
    • @MBS206 thats pretty neat and tidy to me!  I'll get a photo of mine when I'm out there next. It might require multiple photos to understand the scale of the atrocities though... In total I have 4 sheds of varying sizes and layouts. Main shed is 14x8, second shed is 3x8, third shed is 11x2.5, fourth shed is around 6x4.  All are pretty much full.   The main goal of my cleaning tsunami is to make the main shed predominantly car and motorbikes only. Second shed is my metal fab room (2 x bench grinders, drill press, bench belt sander, metal band saw, scrap metal storage and some of my garden tools.  3rd shed is more bigger garden stuff, storage for engine crane, jack stands, concrete grinder, concrete mixer, air compressor lives there, and it now has two 2mx2m pallet racking shelves with itemised boxes holding building stuff, electrical stuff, plumbing stuff, etc, etc.  The 4th shed is Ryobi electric ride on mower, mini boom sprayer, ancient Kubota tractor, more garden stuff!  I have got a lot of shit....  Then there's the pool house (8mx4m) and the pool pump shed (4mx4m).  I built all of the sheds over the 11 years we've been here.  The main shed was a Ranbuild kit, the rest are all custom made to fit the areas available. Building the main shed taught me a LOT as I had no idea about building anything prior to that!  I've still got one more in me. It will be my man cave which I poured the extra concrete for way back when I poured the concrete for the main shed. The idea is the Skyline will be a centre piece of the main cave once (if...) it's finished.  I told my now 14 year old son yesterday that I will 100% drive him to his year 10 formal in 2 years. Still a long way off but at least I now have a date to work towards! 🤣
    • Modern oils are amazing. Add tyres to that as well.
×
×
  • Create New...