FJ1600 Posted November 14, 2012 Share Posted November 14, 2012 92' gts-t Stock Internals - SSS Automotive Wrecker Engine Bosch ev14 750cc injectors Z32 AFM Walbro pump Sard FPR Red jacket coils Bellmouth dump and 3' exhaust + decat GRedy Profec B II FMIC Hypergear RB20 Highflow Turbo PULP 98 224.8kw on 17psi Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/18/#findComment-6624848 Share on other sites More sharing options...
Scotty24 Posted November 30, 2012 Share Posted November 30, 2012 Had my r32 dyno tuned today. Hypergear atr43ss1 turbo with tial 38mm external wastegate Hybrid side mount exhaust manifold Cooling pro return flow intercooler Jjr 3 inch turbo back exhaust with high flow cat Bosch 550cc injectors Bosch 040 fuel pump Nistune Pod filter Made 297.6hp at 18psi of boost A little lagier than I was hoping but it pulls well on full boost. Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/18/#findComment-6649410 Share on other sites More sharing options...
toffy Posted December 20, 2012 Share Posted December 20, 2012 (edited) 89 gtst jjr/kkr430 gtr injectors gtr pump (i think) z32 afm China cooler full 3 to 3.5in exhaust Dr drift remap (from another car , was put in just for a temporary thing) 226.1rwk @20psi Edited December 20, 2012 by toffy Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/18/#findComment-6676542 Share on other sites More sharing options...
Spence_R32 Posted December 21, 2012 Share Posted December 21, 2012 '93 R32 GTSt RB25 turbo 550cc injectors Walbro fuel pump Stock SMIC Stock AFM Nistune 3" exhaust Pod filter 173 km @ 12 psi Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/18/#findComment-6677644 Share on other sites More sharing options...
Creyfish2003 Posted January 25, 2013 Share Posted January 25, 2013 stock internal rb20 sard 700cc injectors rb25 turbo vielside ecu adj fuel reg splitfires intercooler boost T exhaust made 204.3rwkw on 15psi Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/18/#findComment-6723066 Share on other sites More sharing options...
Tomtom69 Posted February 12, 2013 Share Posted February 12, 2013 Stock internal rb20 Fmic 3" exhaust Stock turbo running 12 psi 160kw Going to get garret 2871r turbo, gtr injectors, Walbro fuel pump and nistune and hopefully squeeze out over 200kw Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/18/#findComment-6748201 Share on other sites More sharing options...
r3kl3s Posted February 15, 2013 Share Posted February 15, 2013 1990 rb20det 180xxxkm Stealth Return Flow Intercooler High Flowed Steel Wheeled 34 Turbo 3inch Turbo Back Split fire Coil Packs K&N Pod Standard Intake Walbro Fuel Pump Boost T set at 1bar of Boost Standard Computer 259.7hpatw/193.6kwatw Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/18/#findComment-6753429 Share on other sites More sharing options...
thomas.mcsherry Posted February 27, 2013 Share Posted February 27, 2013 (edited) 1993 rb20det 150,000 fmic power fc z32 stock internals 800cc injectos walbro fuel pump 3in dump to straight through 14 pound apexi ax5370b 163kw Edited February 27, 2013 by thomas.mcsherry Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/18/#findComment-6766851 Share on other sites More sharing options...
Jap_star Posted March 28, 2013 Share Posted March 28, 2013 r32 rb20 r33 turbo front mount exhaust 10psi z32 afm nistune 166 rwkw @ Jaustech automotive Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/18/#findComment-6797833 Share on other sites More sharing options...
raZ1911 Posted April 13, 2013 Share Posted April 13, 2013 HKS 2510 R34 Side Mount 3" exhaust and 3.5" Diff back 17 PSI Link G1 GTR Injectors Walbro Fuel Pump 3" metal intake with Pod Filter Stock Coil Packs eBay Boost T E85 210kw Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/18/#findComment-6814878 Share on other sites More sharing options...
asus Posted April 14, 2013 Share Posted April 14, 2013 (edited) Stock unopened RB20 kinugawa TD05-18G @ 16psi rb26 injectors nistune Q45 AFM stainless low mount manifold 38mm external gate 3inch turbo back exhaust Blitz FMIC Edited April 14, 2013 by asus Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/18/#findComment-6815316 Share on other sites More sharing options...
bcozican Posted April 15, 2013 Share Posted April 15, 2013 Ran my rb 2.2 for 4 years of solid drifting over 60 events in various stages from 98 ron to full e85 and a heap of different turbo and power setups, below is the last dyno and finally a main bearing went a couple of weeks ago so sold it off... but will put up results. prob forget a bitta stuff Dyno was a hubber: 550hp and 600 nm at 23psi on full e85 Rb22 port and polished head race springs HKS 264 in / ex cams Adj cam gears dialled in rb25 crank rb26 rods arias forged pistons 82mm cosmetic metal head gasket extra capacity sump splitfire coils vipec v88 ecu 1000cc ID injectors full fullsetup, braided lines walbro lift pump 2 x bosche ext aeromotive filter + fuel pressure reg plasmaman plenum greddy intercooler greddy oil cooler setup PWR rad 6boost Gtx 3076 .82 rear Tial 44 ext gate rb25 box both extreme and exedy clutches used custom exhaust 3" to 3.5" twin pipes straight through restrictors in head, massive head to sump drain, breathers from covers to catch can and drain back to sump etc etc Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/18/#findComment-6816446 Share on other sites More sharing options...
ZRBE Posted April 17, 2013 Share Posted April 17, 2013 Hey all, my r32 gtst type m '93 Standard engine internals Stock Coilpacks Stock injectors Unknown turbo back exhaust 3inch/4inch tip T04e turbo 18psi Big FMIC Gay pod filter (WTB stock air box) Turbosmart wastegate w/ screamer... Ha Manual boost tap HKS BOV to atmo (making car stall like a bitch) Tuned by ChipTorque 208kw... Yet to install Yellow Jacket coils and 550cc injectors and Turbosmart Kompact plumb back BOV Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/18/#findComment-6819596 Share on other sites More sharing options...
BlueRB240 Posted April 29, 2013 Share Posted April 29, 2013 The RPM scale is a little off on the dyno also done to SAE correction on a Dyno Jet. The pulls were made to 8k rpm max boost was set to 18psi on 91 pump gas. The RB20 is in a S14. Wish I wasn't so scared to go over 8k . Persicion SC61 turbo with stage 5 exhaust wheel Griffen FMIC Tomei 270 cams Tomei valve springs Tomei head gasket ARP head studs AEM S2 EMS HK$ evc 4 Apexi GT spec exhuast Sard 800cc injectors Supra TT fuel pump Rips intake manifold Blitz dual surge BOV <~~~POS 1 Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/18/#findComment-6830788 Share on other sites More sharing options...
BlueRB240 Posted May 5, 2013 Share Posted May 5, 2013 Cooler day and alignment done this time before I jumped back on. Same boost level of 18psi. Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/18/#findComment-6839174 Share on other sites More sharing options...
iDannyz Posted May 27, 2013 Share Posted May 27, 2013 '89 R32 GTS-t Greddy FMIC HKS filterHKS low mount exhaust manifoldHKS wastegate HKS 3" TBE KKR430 Z32 AFM 444cc GTR injectors BOSCH 040 fuel pump 237.6kw on 19.5Lost the dyno sheets but it was done at PowerTune in Sydney Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/18/#findComment-6867938 Share on other sites More sharing options...
D.I.Y. Mik Posted May 30, 2013 Share Posted May 30, 2013 R32 gtst RB20DET Deatchwerks 650cc injectors Deatchwerks 320 lph fuel pump Yellow jacket coils Z 32 afm bellmouth dump & 3 inch all the way big fmic Nistune Rb 25 turbo @ 14 psi 180 killerwasps on a safe tune ( a little rich) Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/18/#findComment-6871761 Share on other sites More sharing options...
Frenchie1001 Posted June 8, 2013 Share Posted June 8, 2013 stock motor, z32, tdo6 444cc injectors Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/18/#findComment-6882855 Share on other sites More sharing options...
thomas.mcsherry Posted June 20, 2013 Share Posted June 20, 2013 r32 rb20 gtst cometic head gasket arp head studs hks cam gears ebay plenum z32 800cc injectors power fc fmic 3dump to straight through made 206kw @ 17pound then the turbo let go after many years Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/18/#findComment-6898142 Share on other sites More sharing options...
Maverick86 Posted July 26, 2013 Share Posted July 26, 2013 89' R32 gtst Fmic E-boost street 500hp walbro pump Nistune Made 167rwkw @ 11psi (Jaustech automotive) Now have HKS 2530, splitfire coils and set @14psi feels abit quicker! Link to comment https://www.sau.com.au/forums/topic/103095-rb20-turbo-upgrade-all-dyno-results/page/18/#findComment-6945545 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now