Jump to content
SAU Community

Recommended Posts

  • 6 months later...

Built RB24 using a HR31 red top as a base

New 26 n1 crank

Spool rb26 rods

Custom 80mm Cp pistons 8.5:1

N1 oil pump

Arp everything

Cometic gasket kits

Tomei 270 cams

Valve springs

A bit of head work using standard size valves etc

Gtx3071r low mounted on stock mani .73 ar 

Stock intake and exhaust manifolds, external gate welded to back of turbo housing

Bosch 1000s

22psi on Caltex E85

Nistune ecu with z32 afm

411whp on a 35degee day Iats over 50

Maxed the afm so stopped at 22psi

Quite responsive considering makes positive boost at 2500 and full boost around 4k

20181129_151957.jpg

20181129_151455.jpg

  • Like 1
  • 2 months later...

1989 r32 gtst

Stock injectors

Walbro 250 fuel pump 

Mines ecu

Stock internals 

Hy35 holset

Cx top mount

Large no name front mount

3" de cated exhaust

6 psi boost

 

20181014_135918.jpg

FB_IMG_1505938583523.jpg

Edited by kennylinton86
  • 4 months later...

Completely stock (K&N panel filter) and perfectly running 206,000km 1992 R32 GTST series 2 type M. 4th gear pull to about 165km/h. I thought I would do a base line pull to see what I am starting with. Sat on 9-10lbs the whole way through and AF was perfect as well. Possibly the lowest dyno figure for the website!!! Also zero correction factor on a near new mainline dyno...

EE3D7D04-D3F3-487B-A7DC-8D124936E085.jpeg

7CFEAA20-1EE6-4C1F-9AC7-4995A6E94645.jpeg

Edited by HCR32 type M
  • Like 1
  • 5 months later...

1992 r32 GTST

1000cc injectors, with big bore fuel rail

Walbro 460 fuel pump

E85 

Nustune ecu

Stock internals 

RB25 Turbo with RB20 Actuator

15PSI Boost

Big Front Mount Cooler

3" de-cated exhaust

IMG_6443.thumb.JPG.d38e439cddcc5aed74ee3818a92d6d3f.JPG

IMG_6435.thumb.JPG.611d2723bf4dfbd191eebc707dcd7474.JPG

  • Like 1
  • 6 months later...

1990 R32 gtst

Stock internals

6boost twin scroll t3 manifold

dual turbosmart 40mm gates

Holset HY35/10cm twinscroll turbine @ 20PSI

R35 maf/4" intake

Splitfire Coilpacks (Rewired S2 with no external igniter)

DeatschWerks 550CC Injectors

AEM 320 Pump (FPCM Removed, OEM Relay Rewired)

FFP Cast Manifold

3.5" Downpipe to 3" Catback

Nistune

94 AKI Pump gas

366WHP/273WKW and 301WTQ on a mustang dyno on a very hot day with a dead clutch fan. We we're letting it cool down between pulls near the end and I'm confident due to this it actually makes a bit more. 

IMG_20200701_213744.jpg

IMG_20200628_174740.jpg

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok glad you clarified on the frenchy’s options , I was worried about if my oem hoses would fit the new compressor or not if I just bought the bracket/compressor kit ,  didn’t realize they also sold a larger full conversion kit. Hmm may just go oem in that case then to make it easy only because I plan to sell this car to upgrade to a 32 GTR or 34 GTT.
    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
×
×
  • Create New...