Jump to content
SAU Community

Recommended Posts

Hi guys.

With the new section, its looking a bit bare, best thing to brighten it up are good useful sticky threads :)

If someone has an idea, post here or PM me.

I was thinking if someone can post up formula's to workout diff ratios and things like that... would be very handy for a sticky.

You'll be credited with the information of course and all that :D

Throw ideas out there

-ash

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/103170-this-section-needs-help/
Share on other sites

  • 4 months later...

um. To figure out any gear ratio the formula is: the number of teeth on the driven gear (crown wheel) divided by the number of teeth on the driving gear (pinion) eg: crown wheel 20 teeth, pinion 10....

SO 20 divided by 10 = a ratio of 2:1... easy.

Evan

  • 1 month later...
  • 1 year later...
  • 2 months later...

i whould just check the diff have never come across a single diff that did not have the ratio stamped onto it some where with out a plate on it some where

so why try and work it out?

Edited by neofenrir34
i whould just check the diff have never come across a single diff that did not have the ratio stamped onto it some where with out a plate on it some where

so why try and work it out?

Because people get diff gears changed

can we get a thread up on recomended oils to use in gearboxs, vlsd and mechanical lsds. say in my gearbox i use fuchs 75/90 because i found the redline shockproof crap and in my kaaz 2 way i use fuchs ls140 with ford motorsport additive. i notice alot of people use castrol syntrax and find it good

  • 1 year later...
  • 1 year later...

Is it possible to get a sticky thread made up about 33 boxes into 32's. So many people still cant use the search function. I know there are a few good threads about the conversion maybe they can be put into one thread?

  • 5 weeks later...

I think a sticky on gearbox identification would be awesome, like being able to tell by the webbing on the housing/dimensions/weight/any numbers stamped on box, gear diagrams, 1piece/3piece syncros stuff like that :)

  • Like 1
  • 4 months later...

heres a link from nismo that has all diff types ,ratios & models they come out in

http://www.nismo.co.jp/products/competitio...f/lsd_price.pdf

there is a lot of usefullinfo on the above but cant seem to find out wether my 32 has a VLSD or just a LSD (?)

  • PranK unpinned this topic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The old manifold was quite under the GTR strut brace.  The new manifold is quite [unknown] the GTR strut brace. The GTR strut brace was needed to clear the bonnet vents. The Old strut brace will almost certainly clear the new manifold, but not the bonnet vents. The old strut brace will almost certainly clear the new manifold, and the new bonnet without vents. But I am hoping the GTR strut brace clears the new manifold :p
    • On the bright side, at least you knew that it happened and remedied before anything happened. A friend of mine just took his Fiat 124 to a shop for an oil change and they didn't tighten the oil filter housing properly. 4.5 quarts spewed out and even after refilling + tightening the cap the engine has a tick now.
    • So, more pain. The FAST manifold is a little larger than the stocker. This is problematic because there really wasn't much clearance to begin with, so going from 'barely enough' well into 'no' is sad based on the external dimensions of the thing, even though where it bolts to the head is the same. Result is the fuel rails sit a good 25mm higher, and this is a bit of an issue with the wiring that runs behind the motor, and the fuel lines, and everything else. When pushing the manifold on, it required a huge amount of force to crush wiring looms to fit it, sensors like the MAP sensor are about 1mm from the firewall, and the FPR just has to bend ABS lines to be forced into place. After some brainstorming and some sad drinking, the loom for some reason ran from the grommet behind the ABS sensor, then to the driver side head, then back to the passenger side head. So all of this was pulled back and stripped, a few wires cut and rejoined, so that the 'branch' was now on the passenger side's head as below: Before you basically couldn't see anything behind the driver head. This is much improved! The MAP sensor is now pointing up (instead of at the firewall) Brackets have been made up for the rail. The rails are for a LS1, the manifold is designed around a LS2 as it's base. Which of course has slightly different bracketry and water pump clearance, hence the mods people need to do. Should be hopefully mounted tonight. I spent money on a new FPR that is slightly more compact than my Turbosmart FPR1200. The gauge has also been moved to the rail. There's also apparently an ORB to AN Union instead of the adapter, because the ~25mm of the current adapter is going to make the difference. Provided this all goes together and arrives today, it'll be the totally not stressful attempt to start it.
    • This seems like a pointless exercise. There is no E30 availability. Ongoing availability of E85 should not be assumed. Flex-fuel is the only sensible approach, so you can use E85 when and where you can get it, 98 when that's al you can get, and anything in between as you fill it up and drain it down. And if that means replacing the pumps, fitting a flex capable sensor/ECU/whatever has to be done to these Renault shitboxen, then.....so be it?
×
×
  • Create New...