Need A New Clutch?

[2rismo]

My Jim Berry clutch is for sale. EASILY holding 265kW and still going strong. What no-one's mentioned is how cheap it is to have Jim rebuild them back to BRAND NEW SPEC.

$450 tops!

I want $550 ono for mine. Wont last long.

33 gtst.

Adrian

[Gts-t]

Wierd thought i posted this before but here it is again.

Direct Clutches in Albion Brisbane are one of australias premier places for clutches. Some of you might not remember the judge and his high hp cars, well he used direct exclusively.

And i dare say his cars where making more power and torque than 99% of users on here.

You will not be dissapointed

[2rismo]

I've heard very good things about Direct Clutch but I think I'll be sticking to recomending Jim's clutches.

He's done nothing but clutches for over 25 years - that's good enough for me.

[SirRacer]

im quite interested in the amount of pressure (power) some of these clutches can hold up to.

im looking at putting out around 350kws atw and have been told ill need a tilton twin plate with custom flywheel. is this necessary??

[JAS-25T]

  2rismo said:

My Jim Berry clutch is for sale. EASILY holding 265kW and still going strong. What no-one's mentioned is how cheap it is to have Jim rebuild them back to BRAND NEW SPEC.

$450 tops!

I want $550 ono for mine. Wont last long.

33 gtst.

Adrian

ill take it alright.

[dangerous_daveo]

  SirRacer said:

im quite interested in the amount of pressure (power) some of these clutches can hold up to.

im looking at putting out around 350kws atw and have been told ill need a tilton twin plate with custom flywheel. is this necessary??

You should call Jim. But he said mine should hold about 800hp at the fly fairly easy, its his superdooper single plate one. If you do all the conversions you still have head room. But just call Jim better to get it from the horses mouth.

[Russco]

  dangerous_daveo said:

But he said mine should hold about 800hp at the fly fairly easy

Jim usually rates HP on circuit applications so if you put slicks on the rears, rev it to 7000rpm & then dump it on a well-prepped track like Willowbank like I did, well....tore my carbonic down to the rivets. Ended up going to a NPC twin plate and it is bulletproof + only $200 to rebuild as opposed to $700 for a single plate.

[Godzilla32]

Mine is ready to pick up from Jim now and i distinctly remember him asking me what i will be using it for even went down to percentages. EG:80% street, 15% circuit, 5% drag. So if you specify what you want to do with it he will give you what is necessary to do the job.

Deren

Edited October 19, 2006 by Godzilla32

[shanef]

  slapper said:

Jim usually rates HP on circuit applications so if you put slicks on the rears, rev it to 7000rpm & then dump it on a well-prepped track like Willowbank like I did, well....tore my carbonic down to the rivets. Ended up going to a NPC twin plate and it is bulletproof + only $200 to rebuild as opposed to $700 for a single plate.

A mate with a 240awkw gtr got a heavy duty clutch (told it was good for 300awkw) off NPC and his first outing at the drags saw pretty aweful clutch slip.

I got jim's full monty, and upon asking him what it'll hold in my 26/30, he said it should see 1000+hp

[GT-R LM]

Got a single plate Exedy sports tuff ceramic from western clutches was told itll hold 500-550 hp

Not happy at all done about 2000km and on the first launch it flared to 8000rpm all of 1st and 2nd gears had to back it off 2 times to make it grab in 2nd. In gears in dosnt flare.

I dont recomend to anyone this Shit clutch.Unless you feel like wasting $900 + the labour fees.

Edited October 26, 2006 by nismo 400 R N1

[SirRacer]

i live in NZ and shipping something the weight of a clutch probably wouldnt be worthwhile so i was just interested theoretically as various "experts" have such differing opinions.

I would ring Jim however the chance of me buying something off him is small and i dont want to waste his time.

There are second hand clutches galore around at the moment. If i was to buy a nismo twin plate how much approximately is the rebuild costs on something like that.

Cheers

Edited October 29, 2006 by SirRacer

[Fugi]

Im thinking of gettin a clutch of jim.. however could someone please tell me how much labour would cost for installing this clutch?? cauz im in vic so i need to get it installed somewere else...

[CRZY32]

  Fugi said:

Im thinking of gettin a clutch of jim.. however could someone please tell me how much labour would cost for installing this clutch?? cauz im in vic so i need to get it installed somewere else...

I've been quoted $250 labour to install a clutch into a GTR. Previously paid $300 for a GTSt (about 5 yrs ago). Cost of machining flywheel would be extra.

Both workshops in Melbourne.

[Fugi]

Ahh thats not too bad.. Thanks for that..

looks like the clutch is next on my list..

[WHITER33GTS-T]

Ive had a Jim Berry "race clutch" in my 33 for the last 18 months and it has never slipped and was running 300rwkw. I know have closer to 400kw and even a 6500 launch and slicks still didnt slip. They are awesome.

[Lithius]

My R34 GTT needs a new clutch... was going to go for a twin plate, but maybe Jim is the better option? I'm in NSW so can he build it all for me, then send it here and I get it installed by someone else? It's for an R34 GTT and I want it to be able to hold about 265rwkw, does anyone have a rough idea on how much it'd cost?

[WHITER33GTS-T]

Im in Tassie and i got mine delivered with a standard flywheel for less than $1300 but that was a while ago. I did have a Nismo twin plate and that was hard to press in when this clutch from jim is nice and easy but grabs hard.

[jet pwr]

  WHITER33GTS-T said:

Ive had a Jim Berry "race clutch" in my 33 for the last 18 months and it has never slipped and was running 300rwkw. I know have closer to 400kw and even a 6500 launch and slicks still didnt slip. They are awesome.

how much was that?. i am awaiting a call from him tomorrow. mine made just over 700hp at engine and am wondering whether a single will do

cheers

[Noy]

Put me down as another happy customer of Jims, also got the full monty from him, have had it in the car 6 months now and haven't had any problems at all...

and as stated before alow at least an hour out of your day for the phonecall.. Jim loves a good chat

[benm]

My Jim Berry clutch was so good it was as easy to drive in my 320kw gtr as my budget exedy was in my 185kw r33 gtst.

Just don't forget when ur getting a new clutch to spend the extra $500 and get a new flywheel with it