Jump to content
SAU Community

Recommended Posts

cheapo lights are around $7.50 a bulb. Toothpaste is an abrasive so it makes sense that it would clean the plastic... I've heard it being used to polish other things too, but cant remember.

I polish my glasses with toothpaste once a month.

Sorry. I'll go now.

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • 1 year later...

I had some overspray on my headlight and cleaned it off with thinners.

What a farken mess! looked like wrinkly skin.

I tried cutting polish, that just made it shiny but didnt get rid of wrinkles and realised I'd really farked up. Tried Auotsol that worked but it was gunna take ages to get rid of all the wrinkles so I stepped up a notch and tried Gumption, that worked better but still a long way to go, until I used a 3m pad with the gumption. That worked really well, still took a while but only 1/2hr,but I to continually clean the pad because it built up with bits of plastic pretty quick. I then cleaned with water and spayed silicon spray on it and it came up a beaut.

If you look at my avitar you can see how farked it was.

DONT DO THIS UNLESS YOUR PLASTIC IS REALLY FARKED

  • 1 month later...
  • 4 months later...

Question, In order to remove the headlights, do i have to take off the front bar? If i do, the front bar for the r33 gts-t series 1 is just 3 screws at the grille, and 2 on each side under the fender right?

  • 4 weeks later...

I dont think u need to remove your bumper to take off the headlights. The actual headlight asembly is easy to take off from the car.

But no-one has answered the question of how to take off the front plastic cover from the headlight assembly. Can it be properly re-sealed? I have cleaned my light 100's of times with that polish from Unique Auto Sports and it is just a heap of crap. It works and looks good for a day or two then bang, yellow again!

  • 2 months later...

Putting your headlights into an oven to pull them apart is going to be risky.. especially if you've never done it before. When I got my R33 series II my headlights were (and still are) frosty looking because of the crap on the inside you just can't clean.

I did manage to find a place in Blacktown called Plastifusion and all they do is headlights. Link --> Plastifusion

They will do the hole oven business thing with your headlights, polish them up (inside and out) and re-seal them again. Unfortunately for me though one of my headlights has some fine cracking. In that condition they won't pull it apart to polish it. I basically need mine replaced :D

Anyone know of a place where I can source some cheap series II headlights? Nissan want $1000+ for a pair :P

There's also a place in Keysborough, Victoria that does change overs (is it Mr. Headlight??) Do a search on headlight +replacement, I read the thread 18-24 months ago...

any link? i broke the screw that adjust the level of the headlights, now they are pointing too high. thx

Could it be these guys?

Melbourne Headlight Exchange Pty Ltd

Unit 2/ 130 Bridge Rd Keysborough VIC 3173

ph: (03) 9706 3922 Auto Parts Recyclers

I couldn't find any website link for them.

When you guys clean the headlights, are you doing it with the lights still in the car, or are you guys actually removing the headlights and then doing it? I just dont want to get toothpaste or the maguires stuff on the paint??

how you going mate?

I just got my 33 back from insurance damage of some moron reversing into it.

The second hand lights put in by "Gold Coast Panel Works" on the gold coast, looked like they were brand new. And I mean brand new when i picked it up. If you bought a new car they would stack up.

They are based on the Gold coast qld. Im not sure how they made these lights from the wreckers look like this.

They are in southport give them a buzz

I guess alot of ppl might have this problem if your line is year 94 and below.Mine's a 93 and the headlights getting a bit yellowish.Just wondering how to make it white and shiny(like big red) again.

thanks

If its just the outside(I thought it was on the inside because tried lots of different things and didnt change) MR Sheen no s**t! took it right off and thats without removing the lights

Edited by BOVed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Appreciate the feedback. It is street car, but not a daily. Last week I got a quote from a good exhaust shop for a decat, one which is bolt-on, bolt-off to be easily replaceable. I got quoted for around €150. I usually do push the motor, but I wasn't in this case to make sure that no damage is done until I get the cat sorted. I think it's best to also ask the exhaust shop for the other option and see what they can do. If (big if) I were to decat though, would it be best to tune the car or would the stock ECU handle it? As far as I know, the stock ECU is not tunable and that would require additional purchases.
    • As above, definitely bash it or get it replaced with a high flow unit.
    • get some flares on them, or wider guards haha
    • Another question sorry, what stainless do u use in the turbo external WG plumb back piping? Is it 321, 316 or 304?
    • Right, its been a while for updating this car, but I made some small but important progress today. In the end I bought an Ecutek dongle from the Australian distributor Tunehouse (for local hardware support) but have gone with a remote tune from Racebox in the US (because they have done millions of these, and I could not find any tuner where I could access the tune anyway as they are all password locked). The App is reasonably easy to work with, but the PC software reminds me of Haltech's ECU Manager that you need to use with the Plat Pro ECUs, it is a nightmare.  Anyway, I sent the details over, got back a tune file and a request for data logs. I finally got a chance to access a private test track today as they want redline logs in 3rd and 4th, and have sent them back for the first round of reviews. The main difference in the tune is going from 1.0 (stock) to 1.3 bar (19psi), although I'm sure is a lot of other stuff in the background. Keeping in mind this is a dead stock car with 125,000klm, this is what the App's performance test claimed: Before After Interesting to note that both 400m tests had the same terminal speed (158klm/h) but different ETs. And no, the speed limiter seems to be higher than that at 186kl/h. Summary of the key logged parameters for the 3rd and 4th gear runs were: Those little turbos were certainly whizzing at 200,000rpm+.  Also I'm really not that excited about oil pressure 55psi at redline so I think I'll go thicker than 5w30 (nissan recommend 0w20....) and see if that improves it. Other than that (and the big boost spike....) everything looks good as a start to me.
×
×
  • Create New...