Jump to content
SAU Community

Recommended Posts

Hey guys i was thinking of getting a bigger intercooler for my car.

i have a r33 gtst skyline and was wonderign if you know where i can get a cheap intercooler kit which u can install yourself.

Also would it be easy to install a turbo timer and a boost controller or should i get a pro to do it for me. Anything would be helpful

Link to comment
https://www.sau.com.au/forums/topic/103390-intercoolers/
Share on other sites

If u want really cheap and easy to do, go for an R34 GTT stock cooler. Its a side mount and bolts right up. Unless ur going for massive power in the long term, thats what I'd suggest. I sold mine to Konrad and he got a 25 rwkw increase running 12psi.

Link to comment
https://www.sau.com.au/forums/topic/103390-intercoolers/#findComment-1900137
Share on other sites

If u want really cheap and easy to do, go for an R34 GTT stock cooler.  Its a side mount and bolts right up.  Unless ur going for massive power in the long term, thats what I'd suggest.  I sold mine to Konrad and he got a 25 rwkw increase running 12psi.

My ears are burning :) That was 10psi choy, not 12. Can post pre and post dynos if anyones interested.

And yeah, for a cheap upgrade you cant beat it. I did the maths and its 61% bigger than the r33 one. Bolts in like it was made for the 33, installed mine the afternoon i got it off choy in 30 minutes, you dont even need to take the front bar off. For defect avoidance it looks 100% stock too- cos it IS stock :) Plus you minimise lag since it uses stock piping and really is quite a small core compared to your hybrid styles for example.

Should be good for up to 200rwkw or so i'm told.

Go the GTT cooler B)

Link to comment
https://www.sau.com.au/forums/topic/103390-intercoolers/#findComment-1900171
Share on other sites

Sorry.  Imagine what it would do at 12psi then :)

Might be able to get it up to 180rwkw i imagine. For reliability i decided to leave it at 10psi for now (specially with how hot it is atm) but next time its on the dyno might as well crank it to 12psi to see what it could run.

Link to comment
https://www.sau.com.au/forums/topic/103390-intercoolers/#findComment-1900185
Share on other sites

So are you saying the R34 GTT standard intercooler bolts stright in with no hassels into where the standard R33 (in front of the front left wheel) is a stright fit??? With no stuffing around????????

Sound interesting im jsut puzzel how it would with no hassle if its %61 bigger.

Thanks Michael

Link to comment
https://www.sau.com.au/forums/topic/103390-intercoolers/#findComment-1900257
Share on other sites

So are you saying the R34 GTT standard intercooler bolts stright in with no hassels into where the standard R33 (in front of the front left wheel) is a stright fit??? With no stuffing around????????

Sound interesting im jsut puzzel how it would with no hassle if its %61 bigger.

Thanks Michael

standard r33 IC is 185mm(H) x 205(W)x60(D). That works out to be 2275.5cm3

34 core - 225mm(h)x205mm(w)x80mm(t) = 3690cm3

% difference = 2275 / 3690 x 100 = 61%

Heres a pic to show the size difference (taken by someone else not me)

Stagea_Vs_R34GTT_Intercooler_Thickness_Comparo_Small.jpg

Width is the same, its just a bit taller and is 2cm thicker. 100% bolts in everything fits like its supposed to be there - cheapest upgrade you can get.

Link to comment
https://www.sau.com.au/forums/topic/103390-intercoolers/#findComment-1900274
Share on other sites

Well as per the countless threads on intercoolers, if ur after more than 200rwkw, go for a front mount, otherwise the side mount will suit ya. You will also need to take into consideration slight increase in lag that FMIC's give ya but again, it depends on what ur goals and other mods are.

Link to comment
https://www.sau.com.au/forums/topic/103390-intercoolers/#findComment-1900881
Share on other sites

Running the standard turbo I can't see much point in going FMIC. Maybe if you are a trackwarrior - using the FMIC to keep the inlet temps down.

The standard turbo shouldnt be pushed much above 10psi - at this level the R34 cooler isn't too shabby. I had a powerfc tune and am quite happy.

Link to comment
https://www.sau.com.au/forums/topic/103390-intercoolers/#findComment-1901107
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I much prefer that to an actual oil pressure issue, never would of thought it would of been a volt drop issue but SAU brains win again. Guess ill be turning down the oil pressure limit for the track and hunting some grounds. Ill hopefully update this thread with some high oil pressure and solid ecu voltage logs. 
    • You've just discovered a really good reason to tell yourself, yes, I do need to buy an aftermarket ECU. Put the MAF in the bin. Slap in the new ECU and have a think about what turbo sounds you prefer.  Do you want a 90's style BOV wooosh? Do you want a hektik tsututututu?  Mate, can't go wrong. Just gotta get that ECU and the world is your oyster. 
    • Hi. Iam just curisou about this topic. I saw this video. It is about Greddy Type FV2. I know that BoVs are about that sound but how and when to use it? I read some topic here and from what i have understand on stock RB with MAF there will be some "problems" if you use this BoV? It vents the air in to the atmosphere and the MAF on stock car needs this air back in to the intake and not out? Or is it wrong? If so...i saw you can put some adaptor to circule air back...but does that not "loose" that sound? I saw another BoV from Turbosmart and it has two "exhaust" like ports? One is for the stock tubing for letting air back and one is for "sound" and let the air in the atmosphere? Can someone please explain? This is the Greddy one:  And this is the Turbosmart.     THANK YOU!! EDIT: So i read about this topic some more and i if i understand that correctly: That Greddy can function either like BoV or 100% Bypass valve? And that Turbosmart is what they called hybrid so you can adjust what and how many air can be vented out or back in? Is this right? THX!
    • That dirty voltage drop is the culprit I suspect 
    • i cant get them all in 1 screenshot unfortunately as i just dont know how to move things around tbh, but they are all from the same log and the line crosses at the same point for all of them
×
×
  • Create New...