Jump to content
SAU Community

Car Wandering


Recommended Posts

hi there

i took my r33 gts t for a drive tonight and it scared the crap out of me .every time i hit a small ridge in the road the car seemed to dive from one side of the road to the other actually pulled me into the next lane almost like driving on tramlines bloody scary .first time ive noticed it doing it it had me that worried that i drove it home at 20 kph .could it be a ball joint or tie rod end caster bushers ? anyone reccomend anyone in the northen suburbs of adelaide that might be able to check it out i really dont want to drive it till its fixed

cheers mid life crisis

Link to comment
Share on other sites

well i pulled the caster arms off today and altho they dont look the best i found the cause of the problem. the bottom ball joint nut was so frigging loose i could undo it with my hands thank god for split pins so a few drops of loctite done the sucker back up and a new split pin all is sweet again.still pulled the caster arms off and will replace the bushers any way . as for wheel alignment the car has 225 s on the front they are half worn very evenly across the tyre and the car had never wandered b4 the nut come loose on the ball joint .anyway just glad ive nutted it out pardon the pun

cheers midlife crisis

Link to comment
Share on other sites

well i pulled the caster arms off today and altho they dont look the best i found the cause of the problem. the bottom ball joint nut was so frigging loose i could undo it with my hands thank god for split pins so a few drops of loctite done the sucker back up and a new split pin all is sweet again.still pulled the caster arms off and will replace the bushers any way . as for wheel alignment the car has 225 s on the front they are half worn very evenly across the tyre and the car had never wandered b4 the nut come loose on the ball joint .anyway just glad ive nutted it out pardon the pun

cheers midlife crisis

I would even replace the ball joints if i were you, specially if they had come loose, was there any grease around the dust seals? I did all my front end bushes and ball joints the other week, wheel alignment, handles a thousand times better.

Link to comment
Share on other sites

Yeah Dean for a second ther i thought u had the same problems i did the other day.

While driving down to wisemans ferry and beyond i noticed that the rear or the car was tracing where my front wheels went,and,at high speeds this is not the greatest of feelings especialy when hitting off camber bumps in the road..they are the new kind of retread one that utilises the sidewall's lower bead as a joining point in the tire.Not the top layer of the belt itself.

The tyres that i had on were 17/45/235 front and 16/50/225 rear.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Great info @tidi0x  Will definitely be handy for others and maybe me if I decide to keep the shit box H pattern.
    • Bumping this up one last time.... I wanted to follow up on the clutch slave issue. I realized that what the issue comes down to is the pocket is flat milled, and the cylinder does not want rest flat. So in order to mount it correctly you will need to make a spacer for the fingers so the cylinder is floating. I took two plates of aluminum, drilled some holes and was good. I did still need to make the relief cuts in the bell housing, as even with the spacer the bleed section still interferes. The OE bell housing the mounting holes are raised from the housing.       
    • If the event in USA goes ahead will be interesting as it seems the rules will get more cars over here. Apparently the track is laguna seca too. Yeah s15, if I get a the lower dash trims, centre console and change front cross member to standard LCA position will fit clubsprint. See how rules are as i would rather do complete widebody than a bolt on flare to run the 295 with proper clearance.
    • If the car is legal height I can't see it being an issue. Found a thread on reddit that might offer some insight.   I got a ticket from a copper in QLD for my S15 being too low. They had this wheel thing on a stick that they put under the car and it hit my exhaust. Anyhow went to an exhaust shop to get the exhaust tucked up/hung a little higher and I wound the coilovers up a smidge. Don't think I even had to go back to the police station unlike when I got defected for having a carbon bonnet when I brought the S15 from the ACT to QLD and had to replace it and then rock up at a police station and have a yougish female officer who knew nothing about cars confirm that I had changed bonnets. Should have just painted the carbon bonnet yellow to match the rest of the car lol
    • Id like to race in the US i think alot of those track would suit me   For the s15? Youd be stuck between club sprint and the new Open Am wouldnt you depending on how much interior you have left in
×
×
  • Create New...