Jump to content
SAU Community

Recommended Posts

Hi everyone I really need some advice from you guys.

I have a Series 1 R33 Sedan - the one with the ugly taillights lol.

I'm in the processes of doing her up but I can't get past the lights. Anyway I want to do a conversion to Series 2 taillights.

So basically I want to rip them out and chuck in series 2 ones. Has anyone done this before?

What I need to know is, is it possible?

Thanks

PS. Below are the only two pics that I could find the 1st a series 1 (silver one) and the 2nd a series 2.

http://www.skylinesaustralia.com/photopost.../big/perpage/12

http://www.skylinesaustralia.com/photopost...door/perpage/12

the 2nd one is Impul version isn't it?

Hi no the second pic is just a Series 2 sedan.

Most people hate the back of the R33 series 1 sedan & because the series 2 sedan is so rare, most people do not know it exists.

Rarity - that's one reason why I want to do the conversion.

Jlnewton, you must have one of the only series 2 R33 sedans in brisbane. Good on you they look sweet.

Does anyone know any contacts in the spare parts industry?

I contacted about 20 places on saturday and not one of them has series 2 sedan tail lights. Over half didn't even know that there was a difference between the two series.

It's hard enough finding skyline sedan parts as it is.

Thanks

Try Justjap, they may be able to source some for you.

Thanks chaos, i'll try them in the morning!

Do you know anywhere that would possibly have them in stock? Or if it doesn't take too much time could you please give me the names of the main mobs that you know in Australia?

Thanks

i think its called Alljap aswell, there a wrecker on the northside i believe (not 100%) sure. Justjap are located in Sydney but they always over night their parts etc as i've bought a few things off them.

Also go to the buisness trader section on the forum and ask around there, they may have some or can source some aswell.

Also, the only difference I can notice with the lights is that the blinkers are in a different spot.

Would that be a problem or do you think that it would be easy to get around?

And Chris I'll let you know the end result.

Thanks

I have picked up the lights and the centre garnish today & they are in perfect condition. The car I got them off was a 1997 series 2 40th annerversary special edition and it alsol had a special edition spoiler.

Anyway the spoiler looks great but the guy won't sell it without the boot. My question is would the boot also be interchangable with my series 1 boot?

Thanks

Edited by jcsky2005
I have picked up the lights and the centre garnish today & they are in perfect condition. The car I got them off was a 1997 series 2 40th annerversary special edition and it alsol had a special edition spoiler.

Anyway the spoiler looks great but the guy won't sell it without the boot. My question is would the boot also be interchangable with my series 1 boot?

Thanks

Yup. Congrates on the find.

There are a few series 2 sedansin Bris. My new one obviously, my old one is still getting around here, and I have seen a purple one, white one, two other silver ones, a creamy/off white one and a dark blue one.

Yup.  Congrates on the find. 

There are a few series 2 sedansin Bris.  My new one obviously, my old one is still getting around here, and I have seen a purple one, white one, two other silver ones, a creamy/off white one  and a dark blue one.

Yeah thanks.

Both lights and the garnish set me back a very reasonable $450.

Dropped in to see my cousin who is a panel beater yesterday and he reckons that they will slot right in no problems. He also quoted me $100 to prep, paint and fit the lights….I owe him one!

So that’s $550 all up. I took some pics yesterday of the back, so I will post the before and after pics when the cars done.

Jlnewton, what year is yours? And did the back/taillights of a series 1 sedan play a role in your decision twice to purchase a series 2?

The car I got them off was a 1997 40th anniversary and the rear wing and stock body kit was simply just really nice. Shame that one side of the car was in bits and pieces, scattered on the side of a highway somewhere because I really liked those skirts!

Mine is a 97 manual. The main reason for going to the series 2 is the battery has been relocated back to the front of the car, same layout as the R34s. Means a much more usable boot space which is the whole reason I wanted a sedan, to be more practical.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is there a diameter difference in the stock to Nismo? If so, the weight alone won't be indicative when comparing flywheels of the same diameter, since the radius of the flywheel acts on the moment of inertia with a square factor, where as mass is linear. Roughly going from a 4.5kg flywheel with radius 20cm, to a 9kg flywheel with radius 14cm would see them act the same. This calc is just here to act as a brief numbers comparison and reflects no actual RB flywheel diameters etc. it also assumes even weight distribution (thickness) throughout.
    • It seems this could be due to a restructure/team direction change... Or... You're working with a different category of vehicle... Or you've decided you'd rather be able to play with your own cars again...   I'm hoping the latter...
    • had 4 weeks off over xmas and well did some stuff to the shed and BRZ, well short of is I don't work full time in supercars anymore as of yesterday.........
    • Did you get any down time over Christmas, or have you had any since to play with this? Or have you given up and are trying to get yourself a second hand V8SC instead?
    • A random thought I had just before I hit "Submit on this post". If brake fluid, in a container in my garage that has never been opened goes bad after 18 months, why can I leave it in my car for 24 months in an "unsealed container"... Secondly, some other digging, and brake fluid manufacturers seem to be saying 5 year shelf life... Me thinks there line on 18 months for an unsealed bottle is pretty much horse shit marketing spin. Kind of like how if you drive a car and don't run a turbo timer your turbo and motor will die horribly...   Where I started on this though... Someone (me) started down a bit of a rabbit hole, I don't quite have the proper equipment to do Equilibrium Reflux boiling per the proper test standards. I did a little digging on YouTube, and this was the first video I found on someone attempting to "just boil it". This video isn't overly scientific, as we don't have a known reference for his test either. Inaccuracy in his equipment could have him reaching the 460 to 470f boiling point range in reality. In the video, using a laser temp gun, he claims his Dot3 that's been open in his florida garage for over a year gets to about 420 to 430 fahrenheit (215 to 221c) Doing some googling, I located an MSDS for that specific oil, and from new, it claims a dry boiling point of 460 to 470f. Unfortunately they don't list a wet boiling point for us to see how far it degraded toward its "wet" point. While watching it I was thinking "I wonder what the flash point is..." turns out its only 480f for that specific brake fluid....   As for testing the oil's resistance, I might not be able to accurately do that unfortunately. Resistance level will be quite a LOT higher than my system can read I suspect based on some research. However, I might be able to do it by measuring the current when I apply a specific voltage. I won't have an actual water % value, but I'll have some values I can compare between the multitude of fluids. I'll run some vague calculations later and see if I should be able to read any reliable amount of current. These calcs will be based on some values I've found for other oils, and see how close I'll need my terminals together. From memory I can get down to 1pA accuracy on the DMM. I don't think my IOT Power Tester has any better resolution.    
×
×
  • Create New...