Jump to content
SAU Community

Recommended Posts

For sale: 1989 Skyline R32 4 door gts-t

Asking Price: $14,900

Killometer's: original 62,000kms

Manual or Automatic transmission: Manual

Engine Type: RB25DET original 33,000kms

Modifications: R33 GTR Purple respray, near new Trust TD06 Turbo, Trust racing manifold and external Gate, Trust Intercooler kit, Trust type R BOV, AP Twin plate clutch, NISMO 2 way, JIC coilovers, R32 GTR wheels, 2 extra 740cc injectors, Greddy Rebic 3 controller, R33 GTR fuel pump, Field electronic boost controller, Nardi 360mm wheel, 3 inch exhaust, brand new earls oil cooler and alarm fitted last week.

Complianced: Yes SA rego. First registered late December 2005. rego till end march 2006

Road Worth Certificate: n/a

Crash History: No Accident History - Inspection Welcome

Other Comment's about the vehicle: potential for very quick car, need a dyno tune to tune boost and rebic 3. Car has been driven for approx 1,000 kms since first registered and only run at 0.6 bar.

Mechanically the car is exceptional with the exception of the clutch, its a little noisy. the body in general and undercarrage is great as the car has original 62,000kms however the respray to GTR purple has a few blemishes. undercarrage is very clean.

Air con works so good!

Contact detail's Ben - 0413 299 477

For further details see add on car sales - to be updated

Orignial prestige motorsport add (note some parts have changed) - http://www.prestigemotorsport.com.au/au/st...sp?StockID=1528

post-22191-1138699488.jpg

post-22191-1138699766.jpg

post-22191-1138700239.jpg

post-22191-1138701579.jpg

Edited by kasm

hi just wondering if the suspension is adjustable, nd with the clutch does it need a new 1 coz i know sum twin plates r noisy just wanna find out hehe. im going 4 a loan this wk so im semi keen dont wana stuff u round nd say yea im interested just wanna find out sum more info

thanks carter

Hi yes the suspension is adjustable JIC coilovers, also have a standard set of suspension. yes the clutch does screatch when you are engaging it but once you have your foot off it is fine and does not slip. apparently twin plates are noisy but the noise does get annoying driving around in traffic!

if you dont like the clutch im guessing it could be sold for almost the cost of a good single plate depending on condition when it comes out.

maybe the best thing is to come and have a look.

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah 98 for me, and 6.7/100 was my actual usage. On the downside the bloody thing still isn't running properly but at least they hybrid system is happy now. It starts but missfires like a bastard, and isn't throwing any code except "missfire". Thanks scoop. I did notice the AFMs are reading quite different at idle 1.33v and 1.67v so 25% variance (and have both changed and swapped them, the issue stays on the driver's side afm) so I'm looking for exhaust restriction (mouse nest?), compression issue or (hopefully not, no physical damage seen) wiring issue. Throttle might also be an issue but that is harder because you can't swap them side to side and not cheap to fire the parts cannon at.
    • I hope you're right and it somehow justifies it's existence!
    • actually, I've had one of those for a while and it gets more use than you'd think. Yes catching subframes, engines etc coming out under a car on a hoist, but also getting heavy stuff on shelving (to a certain height) without a forklift, holding the fuga's hybrid battery....like many good tools you'll find the jobs for it once you have it
    • Right, so God, it's been nearly 12 months since my last confession....  The main confession is I'm a horrible car modifier (amongst other things).  Obviously the pool was a massive distraction for the entirety of last year but really doesn't excuse me for doing nothing at all on the car for this year.  To be honest this year was a mental break to get over the extreme mental torment and pressure I put myself through putting the pool in!  It really was a slog.  The pool is still not completely finished but it might never be....  The kids love it and the wifey and I love it so mission success! I have spent a grand total of 30 minutes working on the car since when I commenced on the pool.  I just have not had a spare brain cell to be able to focus on it.  The thought of working on it just seems abhorrent to be honest.  My heart is just not into it.  Yet..... What I have done is decide that I'm a clown to not paint ALL of the underside of the car while I'm at it.  Originally I was stopping at the start of the rear subframe to then "get back to it later on once I'm ready".  Let's be honest, later on might never happen so may as well keep diving in!  I'm already balls deep so may as well go a bit deeper! So......  I've just purchased a hydraulic scissor lift table to be able to take the rear subframe out as a whole unit without having to dick around with jack stands rolling around on the ground.  Us 6' 8" blokes don't operate well at ground level! One of these- Anyway, will the investment in an expensive tool that I'll probably only ever use for one job motivate me to crack on?  Only time will tell..... Wish me luck!
    • Yeah the ACL and similar formable heat shielding materials are really nice. But most people do not have the patience or talent to do a good job like that. Almost anything is better than nothing though. Even if you didn't form it closely like that and just had a slab of it slipped in between the manifold and somewhere/thing you wanted to protect, you would gain benefit. There has to be a market opportunity for people like Artec to make formed heatshields to suit their cast manifolds. The fact that they are cast means that they are consistently the exact same dimensions and they could add bosses to the castings like you see on stockers to allow heat shields to be firmly attached yet floating away from the manifold itself.
×
×
  • Create New...