Jump to content
SAU Community

Recommended Posts

Smaller cars are definately more agile than a larger car - everything else being equal. I find my 'line, with swaybars and decent coilovers is quite nimble but I am sure a smaller car would kill it on really tight corners, just due to being less likely to oversteer - purely hypothetical though.

Steve

Thanks... after being in the MR2 for 6 years I'm kinda used to it. Dont want to move up to a Skyline and feel like I'm in a bulldozer.

It's not all about performance but more like the looks, reliability, and handling..... well maybe not performance but performance potential.

Take the MR2 it could go in for a supercharged engine swap but having a semi leadfoot I'll be collecting tickets in no time.

Guest Nismo_Freak

I hear that... or a S14 would be nice as well. If you want good Nissan RWD handling then get a S14. A GTST wont be able to compair with the same mods. Mostly because if you get down to the basics they are nearly the same car. Just the inline 6 weighs a considerable amount more and has the weight pushed farther forward than the SR20. This makes the car understeer. You can sort some of this out by tuning dampers and sways but in the end your still having that much hurt the performance. The S14 on the other hand has less stock output, less torque, and wont share the prestige of a Skyline. Skyline is a better drag car... I'd take the S14 as a track car. Apart from inter-nissan battles I'd take either of them against any other car. I can think of only a few vehicles that would compair to the power and handling of a GTR. And they all cost more than the GTR, apart from GTOs and Supras. NSX, Z06, Cobra R, Ferraris, Lotus', etc.

i have an aw11sc, it's in my avatar.

they rock and i think you'd have a hard time comparing it to any other 'affordable' car on the road :D but i'm biased as. so if your willing to compromise then yeah get a nissan! haha just don't blame me. althought if i was spending >25k i'd be looking for a schmick sw20.

*puts on flame suit*

seeya

*puts away flame thrower*

I am planning to keep the AW11. But dont have the heart to have that converted to an SC. When I got it 6 years ago it only had 52,000 km on the clock for a 1987 model. It now has 113,000 and counting.

Reason for the R33 is that I might need the extra seating capacity and the air conditioning.

I took a r33 gtst out for a spin yesterday and wasnt all that impressed. Maybe it was because the car was in a severe need of a tuneup or service. Firstly the exhaust was loud at idle and while driving within the posted speed limits. Had me reaching for panadols after 10 mins. And I think the BOV wasnt set right because it kept venting even when changing gears around the 2000-3000rpm mark. Is this normal? One last thing I noticed was that while accelerating to get onto the freeway the car hesitated/stumbled at around the 4000rpm. Is this right or was it just the boost cutting in?

Guest Nismo_Freak

Sounds like the spark plugs arent gapped correctly. The dump valve will make a noise at 2000-3000. It shouldnt be loud unless you have built boost. Some valves like the Blitz and HKS feature twin valves (one small, one large) that vent low boost pressures. If the exhaust is loud I'd suspect poor timing, but I've never heard the R33 much less seen one in real life so its hard for me to tell you.

I know this response is awfully slow, but just stumbled across it and though I could ad something constructive.

I currently own an SW20 (Aust) and an R33 GTR, and I love them both. Completely different to drive but very enjoyable in their own way. Never driven a GTS-T but the GTR feels nothing like it's 1600kg wieght would suggest. I'd imagine the GTS would be much the same.

Can't go far wrong, the MR is a great car, the Nissan also, the MR harder to drive fast on the twisties but that makes for much enjoyment.

Hope this gives some insight.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • From experience, it will come back to bite you haha.
    • Background: my BMW 225i hatchback (rebodied MINI/X1) came with 3x RE003 and 1x Goodyear Asymmetric something. The RE003 roared and slid around, the Goodyear side was quiet and grippy. Definitely my car was thrashed before it got sent to dealers. My brother also got RE003 all round on his old VA WRX STI, I wasn't impressed with them, car was loud so can't comment on noise. Anyway, Hankook stopped making/updating V12 Evo2. So bought S1 Evo3 runflats. Great daily duties tyre and not that harsh ride. Tyre reviews site/youtube rated them as best stopping in the rain and I believe them. Next set, Goodyear Asymmetric 5 non-RFT. It beat PS4 in tests and is like $100 cheaper, so put them on. Great tyre, more grip then S1 Evo3 but a tad noisier as expected, still rocking them. Next set I am looking to go runflats, probably the new Hankook Evo. Although the new Pirelli PZ5 did well in tyrereviews test. Or go Goodyear Asymmetric 6 which was top tyre last year. The V12 Evo2 on my gen5 Liberty GT wagon did great in cold condition (drove to snowy mountains for a day so my husky can feel his ancestor's roots). Super impressive performance for $120 each lol. Never skimp on tyres, brakes, suspension. There's old pics of my R31's crappy random brake pads bending in the caliper at Oran Park track day somewhere around here. Anyway, my 2 cents.
    • I said "Matlab clone". I could throw one onto one of my linux VMs. Probably only take 10 or 20 hours to sort out the dependencies, relearn how to use it, etc etc.
    • Hi all, got myself a 400R end of last year. Few tasteful mods done so far. Love the thing. Has anyone got any suggestions for sourcing bodykit parts for them over here???
×
×
  • Create New...