Jump to content
SAU Community

Recommended Posts

Hey Guys,

Im returning my S1 R33 car to stock and need the following parts:

Items to source still;

1. I have a R33 Custom Veilside Front Bar (silver) wanting to swap with a GTR or 400R Bar (pic attached) The mouth opening on the veilside is the largest as it is custom made.

2. Standard R33 Turbo (prefer S2) 45V5 with the u turn piece on the turbo (low KM)

3. R33 Air Bar Steering Wheel - Good Condition

4. Dash Console Tray (tray under the stereo).

5. Turbo to AFM Plastic thing

Items collected;

1. Climate Control Unit

2. R33 Stock Cooler with all the piping & hoses and clamps.

Thanks in advance.

Im in melbourne so i can pickup. Please PM me if you have any of the following parts. Will take stuff from interstate.

Cheers

AK

post-4729-1139088551.jpg

Edited by WLD747
bl4ck32 you have pm,but does anyone know if the r32 piping and setup is the same as the 33?

Nope, R32GTST is different, the intercooler outlet comes off the front, instead of the rear.

:( cheers :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey, it's me! Though honestly, if I had 20M in my bank account tomorrow, I would not want to be rid of my car all of the sudden - Which makes me think this is money stuff, not "I actually hate car" stuff. I'd probably double down and buy even more trinkets and fun things for it. If this is not you, then sell it cheaper. It will sell at a certain price after all.
    • This is the LCA mount reloctaion kit. Self explanatory in its description. https://au.gktech.com/products/s13-180sx-r32-subframe-anti-squat-reduction-weld-in-kit?_pos=62&_fid=1e812d392&_ss=c These are the alloy subframe bush inserts that I am using. I like them. https://au.gktech.com/products/rear-subframe-slip-in-collars?_pos=29&_fid=1e812d392&_ss=c Alternatively, if you have original and shitty bushes, you might consider outright replacement with poly. https://au.gktech.com/products/polyurethane-rear-subframe-bushes?_pos=28&_fid=1e812d392&_ss=c I would also higly recommend that you look into adjustable RUCAs and tension rods, so you can sort out the camber and bump steer behaviour, especially if the car will be any more than ~15mm lower than stock. I would also highly recommend the GKTech FUCAs, although you really should do some research and learning on the subjetc of R32 FUCAs before making any decisions. All of this will be criticaly difficult to get through a TÜV inspection too, if that happens to be relevant to you. Note that if you do install the relocation kit, you will absolutely have to replace the associated bushes with spherical joints (you can read all about that on the product page) or upgrade the LCAs also.
    • I picked up my block and head last week and have been slowly assembling it since then. Pictures I took earlier this week. The rest of the auxiliaries are on now. I just have my intake manifold runners to tap for my WMI direct port setup before putting it back on. I should hopefully have the motor back in by this weekend.   
×
×
  • Create New...