Jump to content
SAU Community

R32 Gtr - Pearl Green - Rebuilt Engine, Turbos Etc

R34_T88_Widebody
 Share

Recommended Posts

R34_T88_Widebody Rising Star

R34_T88_Widebody

Posted
Posted (edited)

The wraps are finally coming off my project GTR. It has nearly $22K worth of rebuild value in the past few months, and has ZERO kilometres on the new engine. The RB26DETT has been built ( by a GTR specialist) with forged pistons to handle much higher output than that which I will run it at. The turbos have been rebuilt and high flowed, with bigger dump pipes. $5K worth of Dupont 'Jag Green' respray with an amazing orange and gold pearl fleck throughout. And brand new Simmons FR18's with new tread all round have just been fitted. Car is currently having lip spoiler and rear wing ( both stock GTR) sprayed and fitted. You can either but a truly unique, robust and breathtaking example such as this, or you can save several thousand, compromise on quality, and soon regret the fact. This car is an absolutely must see for anyone genuinely interested in a special GTR, and willing to spend a few more dollars to get the car that they want. An ideal GTR for someone wanting to build a big HP single conversion.

I will consider trades to the value of $15K, but only if price expectation is reasonable.

ASKING PRICE $26990.

cheers,

Jeremy

post-23331-1139210055.jpg

post-23331-1139210259.jpg

post-23331-1139210332.jpg

post-23331-1139210648.jpg

Edited by R34_T88_Widebody

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      R32gtr sputtering and stalling

      By MBS206 · Posted

      Diagnosing with and without is mostly the same. You need to know, as Duncan asked, and what conditions. Car hot, cold, idling, driving, if while driving what rpms, is when you're varying, or is it when held constant.   From there it's understanding what can be causing it. Starting with pretending all of the sensors are correct. Which means if it's going rich, why would it be thinking more air is going in than it is, and under what conditions. So things like if only when under boost, it could be be a loose intake piping joint. It's just understanding the system, and understanding when/how the problem occurs, and then if it's only occuring in specific scenarios, what can be causing it.   ECU specifically, if it's aftermarket, it'll have software you can use, for the Skylines on factory ECU, there is Nissan Consult you can use. Most ECUs have a way to get data from them.
    • silviaz
      R32gtr sputtering and stalling

      By silviaz · Posted

      How do you go about diagnosing ecu's that don't have data logging, is it more experience at that point and just trying out things that you think will fix the issue?
    • MBS206
      R32gtr sputtering and stalling

      By MBS206 · Posted

      Stock O2 are basically useless beyond anything at stoich. Any misfire will also be seen as lean. The stock O2 also read a collective exhaust gas volume, not each cylinder. Sputtering and missing means not each cycle is firing, and some are. Which means even if rich, as shit, on cylinders as they miss, they'll read lean, but the cylinders that did fire will read rich, and combined, well, they can read anything from rich to lean.   Start with the basics before even going looking at sensor values.   Edit: I say the above, and that's coming from the guy with a few thousand dollars worth of scan tools sitting right beside me right now that I use frequently for my job.
    • sk8boy204
      Auto GTS4/Stagea transfer case.

      By sk8boy204 · Posted

      I just finished up a manual swap and I have a 1999 S2 AWD automatic in my garage, depending on where you are located. I'm in the the midwest of the US.
    • r32-25t
      R33 GTR N1 REO on an r32 ?

      By r32-25t · Posted

      I’ve heard it can be done, you need to redrill the holes where they bolt to the chassis and apart from that they are the same. I’ve never done it or know anyone personally that has, it’s just something I’ve heard 
×
×
  • Create New...