Fs: R32 Gtst 4 Door (melb) $7.5kono (price Drop)

[inark]

(i will add lots of HI RES pics this week showing every part of the car.)

Item: 1990 R32 GTST 4 Door

Location: Melbourne

Item Condition: Needs work

Reason for Selling: Buying a house like so many others and want a new bathroom

Price and Payment Conditions: $8500ono

Extra Info:

This car was imported in December '05 as a 15 year import.

This car can easily be registered in australia once it is complied.

Car does not come with compliance or RWC and will be sold "AS IS"

I can arrange at the buyers expense for the car to be complied and RWC'd.

Compliance costs were quoted as 900-1200 depending on 2 or 4 seater compliance.

Specs:

1990 R32 GTST 4 door

-5spd manual conversion

-Red(ish) (faded. Will shine up with a cut n polish see condition report)

-RB20DET (stock from what i can tell)

-LSD (no idea what kind... doesnt seem to be a locker as its nowhere near as viscous)

-Genuine Final Konnexion bodykit (front bar needs repair... ive fixed the bottom lip but theres a couple one more crack and the mounting points need to be redone)

-East Bear coupe style rear light covers Have an offer on these so if you want the stock lights this can be arranged

-Later model projection headlights

-Quick release steering wheel kit

-Bride fixed back bucket seat

-Yumcha bucket on passengers side.

-Catback exhaust (very loud but comes with a silencer)

-Brand new custom HD 5 puk clutch (custom made from Dr Drift and not installed yet )

-GREX SH Shifter Knob

-Tein tie end rods

-Front and Rear Apexi Coilovers (Height adjustable)

-R33 GTST rims with near new (95%) tyres on them for compliance and RWC

-Apexi pod

-Window tint on back window and back door windows

-Some weird thermo fan setup

-Has brand new HD battery

-Clear indicators has the orange but also red globes

-Aftermarket grill

-Nismo GTR bonnet splitter

-Bonnet modified to look like GTR item

-Interior painted red... woo

For an extra $500 will throw in:

-3inch hiflow cat ADR approved (need for compliance)

-3inch dump and front pipe in one

-Std airbox

-Brand New Apexi Panel Filter

-R32 Std Rims with non dot approved Advans (not RWC passable)

Condition Report:

As with all the cars i sell i dont like there to be any surprises so will give a full account of what condition every part of the car is in with a large amount of pics in hi res. I will put some pics up as soon as i have enough time to get the car up on the hoist.

-Drivers door looks like it was broken in through and will need repair. I can organise this myself if need be, would only take about 2 hours to repair and will have it ready for primer.

-Bonnet is faded and the clear coat is peeling. Black was going to be the option i went for

-Boot lid has holes from where the stock spoiler was mounted, is filled with some form of putty. Can organise for those to be filled properly ready for primer.

-Front bar will need repair. Crack in top needs repair and also the side mounting points.

-Aircon has been removed i would assume to save weight

-Middle dash vent is missing. Can get replacement if required. Was going to mount an SAFC or gauges there seeing as theres no aircon.

-Paint is faded in most parts of the car but will apparently buff up fine according to the panel beater who looked at it. Obviously the panels/parts that need repair will need to be resprayed.

-Interior is in reasonably good condition... well whats left of it as everything from behind the front seats has been gutted

-Gear stick surround has been munted but i have another one to replace it with in good condition and black

-BOV has been modified with a one way valve

-Bride bucket has a tear but can be patched.

-Car can be complied as a 15yo import and the quoted cost for this was 1200 as a 4 seater or 900 as a 2 seater. I have all the paper work required for compliance.

-Car drives well.... apart from the fact when u put ur foot down the clutch shits itself... hence i bought the new one.

Contact Details:

[email protected]

or PM or phone 0422 930 505

PLEASE NOTE: Due to the fact it is not registered there will legally be no test drives. But any inspection is welcome and if needed i can organise it to be viewed on a hoist.

[inark]

should have more recent pics up over the weekend.

[thanglongz]

Hey mate pretty interested in your car.

Just a few questions, when you say the aircon has been removed, does that mean the whole aircon assembly or just the gas bottle needed to be removed before it reaches Oz?

Did it come with the rear seats, rear shelf, front seats etc. or is it what you see is what you get?

and could you get some pics of the undercarriage, and are there any signs of rust anywhere below?

[inark]

Hey mate pretty interested in your car.

Just a few questions, when you say the aircon has been removed, does that mean the whole aircon assembly or just the gas bottle needed to be removed before it reaches Oz?

Did it come with the rear seats, rear shelf, front seats etc. or is it what you see is what you get?

and could you get some pics of the undercarriage, and are there any signs of rust anywhere below?

<{POST_SNAPBACK}>

completely removed.

Its what u see is what u get basically... no rear seats... also theres a harness mounting hook in the rear where the rear belt used to bolt into. easy to remove and retap for the belt bolt.

ive had it on the hoist already and everything looked as any r32 would. i'll get some pics this week.

negotiable on price too.

[inark]

EDIT:

will throw in the RB20DET if someone buys it for 8500

[inark]

http://home.iprimus.com.au/hoogle/r32/line.rar

5.43MB worth of photos inside and out of the car.

Have even higher res pics of everyone of them

will put up some video of the car reving and idling.

[inark]

OK... if anyone seriously wants it i will part with it for 7500 without the extra stuff or spare engine.

im giving this sale a month and if it doesnt sell then i will simply start selling off the bits which would probably be more profitable lol

[inark]

heres a quick vid.... 3.8MB

http://image-cache.skylinesaustralia.com/p...0/R32engine.wmv

just the engine idling and reving

[DRFTWU]

hey dude very interested in the car i sent you a few msgs and e-mailed you the other day, just lettting you know that i'm still very interested and my car has no been advertised could i possibly grab some mroe photos of engine bay etc...

cheers

dave

[inark]

Cant remember if i replied via PM or not...

PM me if your still interested

[DRFTWU]

pm sent

[inark]

All PMs replied to... i think ... Im getting confused cause of the different forums as to who i have returned and who i havent. So if i havent let me know.

[inark]

Car sold pending payment.

Thanks everyone for the enquiries and interest.

If it falls through i will put it back up

[DRFTWU]

hey dude can u please send me some pics or post some up of the drivers side [email protected]

[inark]

the door stuff? ie. damage around the door handle?

[DRFTWU]

the door stuff? ie. damage around the door handle?

yea if possible?

[inark]

no worries will do it tonight.

i thought there was one in that first lot of pics i posted?