R33 Gts-t Tie Rod End

[djb23_gtst]

I'm after new tie rod ends for both LH and RH sides of a Series 1 1995 R33 GTs-t. I went to Pedders to get them (much cheaper than Nissan) but turns out there are three different versions carried by Pedders for the R33.

Versions differ regarding the thread type and thread length:

12mm thread 95mm long

12mm thread 101mm long

14mm thread 101mm long

Does anyone has any idea which model version I'm looking for?

Thanks

[djb23_gtst]

anyone?

[Bl4cK32]

best off removing them from the car and take them to pedders. I bought mine, and found out i had 14mm tie rods, not the 12mm size i was supplied another trip back to Pedders.

[sonicz]

Hmm, does anyone know if adding longer tie end rods will give you more lock?

In a similar way adding steering rack spacers does.

http://www.skylinesaustralia.com/forums/topic/164067-steering-rack-bushes/page-2

[boostn0199]

Hmm, does anyone know if adding longer tie end rods will give you more lock?

In a similar way adding steering rack spacers does.

http://www.skylinesaustralia.com/forums/topic/164067-steering-rack-bushes/page-2

Nup doesnt work like that, spacers spsce out your rack and alow extra travel but tierod ends no matter what length you adjust it the ssme to get desired toe

[boostn0199]

anyone?

You need 14 mm one

[89CAL]

Just go to pedders with the car and they should be able to come out and measure the exposed threads. Or get some verniers and measure them whenever