Jump to content
SAU Community

Recommended Posts

I'm not sure about a fuse, but if you take the headunit out, there is a wire that controls the remote aerial.

Sorry, I don't know what the colour is, look at the headunit installation guide thread. Etiher that, or disconnect the power to the aerial unit from just under it.

NB: signal will not be that good with the aerial inside the car. it's good though if you only listen to cds.

Edited by 97r33gtst-typeM
Thanx guys....

So to get to the ariel motor, i just have to remove the left hand plastic/carpet panel thingy in the boot and reach around and its the box i can feel yeah??

Power cable runs out the bottom?

spot on buddy! u might actually need to remove the whole motor to do it. unless u can find someone with really skinny hands.

When you have a look at the stock head unit aerial connection, you'll see there are actually 2 aerial connections. One for the aerial that goes up/down and one for the aerial that is a series of wires ON your rear window (amongst the deimster wires). If you don't want to the rear aerial to go up and down, simply use the other aerial wire and leave the motorised one disconnected. You should still get a decent radio reception with the "rear window" aerial.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • EDIT: Just a little info what my tranny is "doing" :   For the long time the trans do this "bad" sound:https://www.youtube.com/watch?v=qs_iTXgDt40 It is literally the same sound and same symptoms(when i push the clutch it quites down) So is it really the shaft bearing?   Also:  i found this on forums: The RB20 and SR20 boxes are nearly indentical inside (rb20 has longer mainshaft)and suffer badly from bearing and selector failures when driven hard   The bearing is true and selector failure kinda too...it is "harder" to get into gears specialy when i drive a little bit hard...
    • We will review wtf is going on, but if you made any donations let me know and i will follow it up with the admins
    • See, that button sounds like perfection Duncan! My eyes really don't like light shining at them from a dash when I'm driving. Being part red colourblind, I've found for most cars that I can change colours on, I set everything to red, so my eyes see the elast amount of colour! I miss normal gauges in cars
    • bro, knowing the Japanese in  the 90's, i wouldn't be surprised if they shared components across their model lineup.
    • Maaaan so many "little" things  i rly hope my old RB20 would be "ok" and not too bad. I try to learn what and what not do i need. I look at crossmember at it looks different...even parts numbers are different. Wiring and all that i rly do not know...yeah someone mentioned the speedo thing. On that yoke clip. I rly do not know what can and cant be done "custom" so that is why iam asking to know and not be suprised 🙂  I know what it looks like  
×
×
  • Create New...