Jump to content
SAU Community

Recommended Posts

I was doing a little searching on intercoolers ... i found out that i could buy second hand prts from this site .... is there a place where people post their items they want to sell ... how does it work?

im interested in buying a r43 GTT cooler for my 32GTST. what do these go for? and if anyone has done this before..is it easy to replace my stock one with the 34GTT one?

Thanks Guys!

Link to comment
https://www.sau.com.au/forums/topic/105019-buying-a-r43-gtt-inter-cooler/
Share on other sites

Post in the Wanted to Buy section, that you are interested in one

At the same time check the Parts for sale section for people who are selling one.

Second hand GTT coolers will sell for around $200

The R34 GTT intercooler isn't a direct bolt it. It will probably cost you about $50 to make the minor modifications required to fit. A few ppl have done it on the forums (RSTME?)

Hey StOjA,

I have a R34 Gtt Cooler in my R32. I'm changing to a front mount with a front facing plenum in a few weeks and will be selling my old cooler.

When I swap over, you can have it for $250, with all the pipes to bolt directly up to your R32 (the standard R34 or R33 pipes won't fit, without modification)

Cheers, Ryan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • OK, so all I can suggest is that - if you have all the parts, and you have all the wiring looms, and you have all the electronic modules, then....it really is just a wiring problem. You likely have a damaged wire, pin, etc, somewhere.
    • Yup, bought this bad boy and hopefully it will be ready to pickup today. Had $5 credit on top of it so it worked out really well!
    • Yeah it is really until until you get a feel for it....then it is easy. Which is no use to you really. I'd buy that torque wrench. One thing from sure, many (most?) tyre shots overtighten the f**k out of wheel nuts, so don't worry if they were tighter when you tried to take them off compared to when you do them up. I've had some crazy tight ones come back from shops, quite apart from the potential damage to the thread, I can't see a smaller person taking the wheel off on the side of the road
    • Hey mate, thread dredging hahah To answer you directly, yes I had my itbs oversized and custom butterflies etc made by EFI Hardware in Sydney back around 2017-2018 if memory serves. My setup had a vast amount of other changes too though, so no direct comparisons unfortunately. i went from oem itbs, HPI manifold and internal gate hks 2835 pro S; to 49mm itbs, cnc port matched Nismo plenum, RB25 Neo lower runner adapter hand port matched, r31house v2 Takoashi MAX equal length twin scroll manifold with twin 38mm tial gates and a FP HTA3076 with 1.01ar twin scroll real hosing. feom power Fc to a link fury wired by 12volt, r32 gtr fuel tank conversion with frenchys twin 460 / surge tabk fuel hanger combo kit, 1659cc injectors, full 4 inch turbo back stainless exhaust, Z34 6 speed, Tomei 2way with 4.3 final drive and a ton of other shit. ive posted elsewhere here with complete run down, but here's a graph from its initial tune with no boost control on, 20psi gate springs only and e85.   7542AE72-DA92-4E0B-8660-B0940FEA7F24.mov
    • On sale mate, $55. Sorted. https://www.supercheapauto.com.au/p/toolpro-toolpro-torque-wrench-1-2-drive/565734.html?utm_content=paidsearch-pmax&gad_source=1&gclid=Cj0KCQjwytS-BhCKARIsAMGJyzqYEnwWmhWf6gxTST_Nz06Gd2VePgyvL7lh6PWrQtbjXTsI6TqSCLEaAuaCEALw_wcB&gclsrc=aw.ds
×
×
  • Create New...