Jump to content
SAU Community

Brand New Clutch Slipping On R33

Starionturbo
 Share

Recommended Posts

Starionturbo Mentor

Starionturbo

Posted
Posted

hey guys

Last week I got a Xtreme HD cushioned button plate clutch installed on my skyline - my uncle fitted the clutch , machined the flywheel and I watched him do it, everything was good.

Drove the car for a few days, fine gripped well.

This afternoon driving it, went into second and put the power down and the revs just shot up. After a bit more driving, slippage in every gear. Drove it to my uncles workshop, he was busy, so had to drive home and the clutch got so bad, it was slipping off the line in 1st.

I am so dissapointed. Ive waited 2 months to get my car back on the road and have spent all my Money on this clutch + fitment and its not gripping.

To add to that, the XTREME distributer is not answering my calls/messages.

Any suggestions of what could be the problem. it shifts fine, theres a brand new master cylinder. Clutch pedal feels normal.

help appreciated

Regards

Kim

Link to comment
https://www.sau.com.au/forums/topic/105026-brand-new-clutch-slipping-on-r33/
Share on other sites
TokyoTaxi Veteran

TokyoTaxi

Posted
Posted

It could be a quite few things.

It sounds to me like there's a problem with the pressure plate possibly being faulty, or incorrect one supplied. Either that or the wrong clutch plate was supplied. There CAN be a whole bunch of other possible causes ( contamination, incorrect flywheel machine, pressure plate bolts not tight / broken, and so on ) but they are less likely to be the problem. Also worth checking is the clutch pedal adjustment to make sure you have freeplay.

After that, there's only one real way to find out !!

gtrken Grand Master

gtrken

Posted
Posted

Did you drive it sensibly for 500Km to let everything bed in ?

And do you have enough free travel at the top of the pedal ?

We have fitted and sold dozens of these things with no problem. However , that is not to say they may have made a boo boo .

Cheers

Ken

salival Enthusiast

salival

Posted
Posted

How do you mean free travel?

I've been through 2 slave cylinders in my r32 gts.. I'm using a HD clutch from daiken.. wondering if that is what's chewing the slave's out..

I've been told to adjust the threaded rod behind the pedal.. if so, which way? and where should my takeup point be.. it's currently about 2-3 inches off the floor

RANDY Veteran

RANDY

Posted
Posted

Mine did the same thing. Bought the car with a dead clutch (really heavy single), replaced the clutch, fine for three weeks, then started slipping... then it got worse and worse till it was practically undriveable.

Shortened the rod on the slave cylinder, and it came good again. A month or so later now, and it's slipping in 3rd and 4th if I put the boot in.

I tried to adjust that pedal-rod, but it wouldn't budge! (removed split-pin and all) My mechanic thinks there's something else wrong though, because my pedal has about 3mm free play, then it's just stiff... all the way to the floor. Takeup seems to be right near the top of the pedal-motion.

I'm stuffed for ideas, and it sounds like my clutch has been nuked in the process. =-[

T04GTR Grand Master

T04GTR

Posted
Posted

cool. not..

is the pedal heaps tight up the top??

ie. is there any freeplay.

because ive seen it heaps where the pedal isnt adjusted properly and the clutch mastercyl "pumps up" holding the clutch on abit..

you need to back the pushrod off abit to obtain a small amount of freeplay :lol:

RANDY Veteran

RANDY

Posted
Posted

By "back it off"... it appears that rotating it will drive the rod into the master cylinder more, and thusly give the pedal some freeplay before it pushes on it. Is this what you mean? I'm quite keen to give this a try!

Any tips for doing this? I had a pair of multigrips on the gripped part of the rod, but it didn't want to turn. Do I need to remove the master cylinder first or anything? (or was it just the hyrdrolic pressure stopping me from winding it in?)

Cheers!

shanef Grand Master

shanef

Posted
Posted

I thought mine was dead flat too. Sent it down to victoria to the supplier who i bought it off and turns out its not flat at all, this has caused the clutch to be fcuked so some1's up for a new clutch and the cost of the shipping, and it sure as hell aint me!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R34 GTT idle problem

      By joshuaho96 · Posted

      For me at least the reason why it bothers me is because it's indicative of a deeper problem. And that will nag at me forever. Especially because I have tailpipe emissions testing + evap leak testing every 2 years.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      WELP. I went to the track, and I suppose it went okay because any time you can drive home is okay. You may notice the car is not on the circuit in this picture. It was about 35C day out in Benalla which means the track was approximately the surface of the sun, probably. Good things, car did not overheat but it _was_ warmer than when I had done track days in similar heat before, I think, I'm not sure - I can't quite remember. Coolant got to ~105 via the ECU after 20-30 minutes of belting it in said heat. Oil got up to 145C in one instance which is pretty crazy due to oil cooler. Pressures were fine. I seem to remember this not getting quite so high before the vents. More HMMMM'ing to be done. On the subject of HMMM'ing, can anyone identify the sounds in the video below, you will know which ones I mean: https://www.youtube.com/watch?v=uj3BkI2cbTc I included some 'normal' sound as a reference for the first minute or so. The microphone in this instance was where the license plate is. It stopped working later in the day which is why my "best example of a lap video (not produced)" had internal audio - Isn't hearable from inside the car. I don't mean the chirping of the un-bedded/badly bedded track brakes which you can only hear while braking... Thoughts, brains trust?
    • funkymonkey
      Did anyone here buy the crashed N1 R32 GTR at auction?

      By funkymonkey · Posted

      blame old mate Hawkins for that one  I remember way back in the day the japanese didn't want them either... they always assumed a race shell would be thrashed. We found a few when looking for an R34 GTR for the Whites to drive in Targa Tas back in 2002.
    • silviaz
      R34 GTT idle problem

      By silviaz · Posted

      I know it's probably not going to cause any major engine issues. I just had a more generic concern that it's technically not running right (I guess this means the rpm is not sitting where it technically should be) Though the other thing is, it's that my steering wheel is shaking at 1,100 rpm at idle until it gets warm (seemed to happen after I tightened my alternator belt, will be testing the alternator soon).
    • soviet_merlin
      R34 GTT idle problem

      By soviet_merlin · Posted

      I mean, what's the concern here? Higher fuel consumption? FWIW my idle sits at around 800rpm or so as well. And yes, it runs fine, idles fine and there are no issues as far as I can tell. I don't quite see the problem.
×
×
  • Create New...