Jump to content
SAU Community

Recommended Posts

every exhaust joint has a different story a straight through pipe will do this or that bla bla. now i was intendng on using a high flow cat shell but with a pipe straight through the middle, so it appears to be a cat. now i know that it wont pass epa, etc. but will it have any other side effects????

cheers

Link to comment
https://www.sau.com.au/forums/topic/105051-cat-vs-pipe/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

cat = no fine if caught

no cat = $10000 fine if defected and they feel like fining u for it, because ur allowing full exhaust emissions into the atmosphere

me, ive got no nothing.........straight through pipe, but my car isnt on the streets

Link to comment
https://www.sau.com.au/forums/topic/105051-cat-vs-pipe/#findComment-1934221
Share on other sites

its really not worth the risk these days, Ive been thru the no cat days. Always worring about getting done over.

Technology is better every day.

A good FULL STAINLESS 3-3.5 inch cat will flow big HP. and its legal.

Unless your making big power over 400RWKW your loss is very small if anything at all.

Thats my 2cents

Link to comment
https://www.sau.com.au/forums/topic/105051-cat-vs-pipe/#findComment-1934288
Share on other sites

cops do not carry the equiptment to test emissions, they have to send you to regency or equivalent to test it.

and if you go to this sorta thing without a cat in.... well thats pretty damn stupid

one thing that will happen with no cat is that you may blow visable flames, which could be bad if there happens to be a cop behind you at the time.

Link to comment
https://www.sau.com.au/forums/topic/105051-cat-vs-pipe/#findComment-1934452
Share on other sites

It depends. Your average patrol car won't carry EPA gear, but if you get busted when the cops are setting up defect stations chances are they will have mobile EPA gear.

Side effects? You'll blow flames. You'll stain your bumper. It will probably smell. You'll constantly be paranoid about getting picked up by the cops / EPA.

Personally, I don't think its worth running test pipes for street use. Modern high flow cats don't restrict that much unless you're making big numbers. Certainly not enough to notice on the street.

Link to comment
https://www.sau.com.au/forums/topic/105051-cat-vs-pipe/#findComment-1934787
Share on other sites

i've said this before but here we go

in one option vid, top-sercet did a test with the apexi cat on there r34 gtr.

they put a dude inside the car and put the exhuast gas into the car and tape up the window rofl

long story short car made 7hp more without the cat (BIG NUMBERS ROFL) - only thing change was the cat

(thats a big number car and it only made 7hp differences)

Link to comment
https://www.sau.com.au/forums/topic/105051-cat-vs-pipe/#findComment-1934814
Share on other sites

If you read through the ADR's you'll find that after a certain period of time, ten years from memory, someone correct me if they know better, its considered financially unviable to keep a car to its required emission levels, in effect it means you can run without a cat imho as its considered part of the emissions..

which really makes me laugh as the cops have no idea about stuff like the ADR's, there was a thing on today tonight a while ago about people being done in chapel street vic i think it was, and they where defecting an old series 1/2 rx7 for having half the emissions pipes blocked up..

yet the ADR's allow for this..

go figure..

Edited by Denver
Link to comment
https://www.sau.com.au/forums/topic/105051-cat-vs-pipe/#findComment-1934932
Share on other sites

ask good exhaust shops about a cat bypass

lighflow cat with a strait pipe that goes around it

so high rpms it will have alot more flow

and for the 3k test for noise and emmissions it passes

my mate has it, 5inch bypass with a highflow (i think it has to be that size to work properly but i dont make exhausts its just hearsay, go ask around)

Link to comment
https://www.sau.com.au/forums/topic/105051-cat-vs-pipe/#findComment-1935266
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...