Jump to content
SAU Community

---power Fc And Control With Uas Tune 230 Rwkw---

rx-[7]
 Share

Recommended Posts

rx-[7] Community Regular

rx-[7]

Posted
Posted (edited)

I have a Power FC and hand controller to suit R32 and R33 GTR. Located in Kellyville Sydney

The Power FC was tuned by Ben at Unique Auto Sports and produced 230 kw at the rear wheels on Premium Unleaded at a very safe tune with solid A/F ratios. And i have the Dyno sheet to prove it.

The car ran 14psi boost (boost restrictor cut out) and only mods were a 3inch cat back exhaust and pod filters.

UAS charges $590 power fc tune, which includes "part throttle, cold start and final road tune using Pro Tuner, knock sensor and Bosch Air Fuel Ratio meter and includes setting boost or multiple boost settings"

UAS DYNO PRICEING

So if you have similar mods this is PERFECT FOR YOU, and can save you $590 Which is about 45% of the total cost of buy and tuning

I also fitted the backing plate from a stock ECU to the Power FC so you can actually bolt it in the stock location, normally they just float around in the kick pannel sometimes getting damaged. But dont worry it still has the power fc front cover to show it off.

I want $1000 firm.

I know some people can get them brand new for about the same money, but if you dont get a brand new one tuned you can blow your motor (and loose power and responce) So your saving about 45% Which is a bloody good discount for an item which is BETTER then new almost every way!!!!!

PLEASE read these and it might make you think twice about buying a new one and driving around without getting it tuned... it could cost you a rebuild.

About UAS quality of tune before and after with a PFC

http://www.skylinesaustralia.com/forums/in...=110666&hl=

This is about dirving around and standard PFC tune

http://www.skylinesaustralia.com/forums/in...=118777&hl=

This one is all about the PFC and all is functions, and about driving around without getting a tune

http://members.dodo.com.au/paul/docs/power...erfc-faq.htm#24

Call Jake 0404080448 or pm or email [email protected]

Edited by rx-[7]
PranK Grand Master

PranK

Posted
Posted
The car ran 14psi boost (boost restrictor cut out) and only mods were a 3inch cat back exhaust and pod filters.

Cmon cefiroboy, read the post...

  • 1 month later...
  • 2 weeks later...
  • 3 months later...
rx-[7] Community Regular

rx-[7]

Posted
  • Author
Posted

Still for sale!!! some one must want a plug in computer with a great tune already to go with out putting your own engine and car through all the risk and stress of getting it tuned!!!! Plug in and GO.... How about this if your local I will even install it for you for free!!!!!

JSL Collaborator

JSL

Posted
Posted
' date='29 Jul 2006, 03:46 PM' post='2366918']

Still for sale!!! some one must want a plug in computer with a great tune already to go with out putting your own engine and car through all the risk and stress of getting it tuned!!!! Plug in and GO.... How about this if your local I will even install it for you for free!!!!!

Still firm on 1k?

If you holding it that price because of the UAS tune.. well I dont want UAS maps... you can get them to put it back to factory Apexi maps and ill make an offer.. PM me let me know..

rx-[7] Community Regular

rx-[7]

Posted
  • Author
Posted (edited)
Still firm on 1k?

If you holding it that price because of the UAS tune.. well I dont want UAS maps... you can get them to put it back to factory Apexi maps and ill make an offer.. PM me let me know..

Yes you can reset them back to original maps no problem, but i dont know why any one would want to as they are not safe its like just buying a new pfc and plugging it in, the reason there is mapping that comes pre installed is so you can plug it in and drive it to get tuned (and so there is a decent base map) The UAS tune is on the VERY safe side of things, and makes loads more power then the original maps.

Read this and it might change your mind....

About UAS quality of tune before and after with a PFC

http://www.skylinesaustralia.com/forums/in...=110666&hl=

This is about dirving around and standard PFC tune

http://www.skylinesaustralia.com/forums/in...=118777&hl=

This one is all about the PFC and all is functions, and about driving around without getting a tune

http://members.dodo.com.au/paul/docs/power...erfc-faq.htm#24

Edited by rx-[7]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Komdotkom
      High temp brake fluid?

      By Komdotkom · Posted

      Reasonably hard, although I haven't run it with the new Endless setup yet. The old brakes were F50's on 335mm rotors and the car did a 1:40.6 at Phillip Island which is a reasonable time, I'm seeing high 600s on the temperature paint. A guy I know ran the Endless fluid at WTAC without issues and he was doing 1:33's I think (Evo) with a 355/332 setup. I don't get out to the track as much as I'd like but we put the car on the hoist and spanner check every bolt and re-paint mark everything, bleed the brakes, change the fuel, check the coolant system and re-bleed blah blah blah before every event. Motorsport is expensive, RB's are expensive so a couple of hours before an event is time well spent. It's also a net time saving because if you can keep your RB from self destructing it saves you time in the long term!
    • Duncan
      First/Second Post

      By Duncan · Posted

      Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • svenskalice
      First/Second Post

      By svenskalice · Posted

      Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • svenskalice
      Kaizo Industries

      By svenskalice · Posted

      Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • believer
      HKS Vcam Step Pro Issues

      By believer · Posted

      I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
×
×
  • Create New...