Jump to content
SAU Community

Recommended Posts

Hey guys, for all the power hungry ppl out there, i was wondering how it feels to have skylines that pull above the 700-800nm torque range???, after all it is seat of pants that is the human torqueometer isnt it lol!!!Ive only midly modded my 25t and i still feel the need for more power, but does it ever get unnerving when you get to such high power outputs???, or is it always the same........still feel the need for more hahah

just a general chat question lol bored!

Link to comment
https://www.sau.com.au/forums/topic/105178-powerwhen-do-you-think-its-enough/
Share on other sites

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

good post

im about 200rwkw, and its probably too much for just a street car

just a quick blip and you are pretty much over the speed limit

theres not many roads around where u can enjoy the power without exceeding the speed limit

id love to make more power if i hit the track, but as my line is our daily driver and it needs to be on the road, it probably will never happen

i wont be powering her up anymore i dont think

Its like money nsta, when ur poor u say if i had 10 million dollars i would give half of it to all my mates and i would never work again. However the more u have the more u want, more and more and more... Its like a game, a sick game, a sick addiction, it becomes an obsession until it devours you... or until u wrap urself around a pole (God forbid)

250rwkw i reckon would be enough for me btw.

Edited by Taso84

hahahah, i so know the feeling, ive got a 25t and am still wondering what the limits are with these cars before traction becomes an issue lol, im at around 180rwkw with basic mods and it seems to hold my 265 rubber atm.

Umm, how much torque do you guys produce at around 250-300rwkw?

Got 230rwkw.Good tyres suspension and driving will usually be the limiting factor.400rwkw in the wrong hands will definately be the limit.200rwkw with a highly skilled driver would do more.Some track days and quality tyres and brake pads and 250rwkw should be just about perfect. :P

i would say depends on choice of racing, street, track or drags. circuits & street i think you can definately have too much power.

drags i reckon you can never have to much power!

circuit i reckon depends on skill and track but for me high 300 kw's @ 4wheels :P is more than enough and other factors start playing an important part eg brakes and handling just to keep it pointing in the right direction.

street i would reckon no more than 300 for safety sake

cheers russ

For my street car, when I can't put it down in the dry with a decent set of streetable tyres, then I'll have too much power.

If I were to build a track car, when I can't put the power down in the dry with a set of full slicks then I'll have too much power.

Right now, I'm going to guesstimate 300rwkW will be about the maximum I'd want in my street car. Especially if I can shift my power curve higher up in the rev range. Otherwise, I'd be happy with around 250rwkW. I should still be able to floor it out of 3rd gear corners without wheelspinning at that level.

Edited by scathing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The spray cans were in the "Kiln" room whilst I was preping the parts,  so probably around 2 hours to get them warmed up, the kiln room has 3 small ovens running at 100°c, 3 medium sized ovens running 100°c, and the large one I used running at 80°c, the room itself was about 28°c, I also spent a bit of time taping up the parts in the room as well, and by the time I was done I would assume that the parts were around that 28°c As for power, I expect a couple of Killerwasps up high would be achievable with the current mods, I'm still running the MZR 2.0 intake and throttle body, and there is a slight mismatch with the 2.0 intake (smaller) and 2.5 intake ports (larger) on the head, this intake is matched and specifically designed to fix this issue with the ports mismatch, the throttle body is also a couple of mm larger, OEM is 65mm, the Bosch is 68mm In the end it will look "prettier" than the molded plastic thing that is the OEM MZR 2.0 intake As for the LSD, it's the OEM Torsen which works fine for what I use the car for, plus, basically no maintenance apart from the occasional oil change
    • I was at Tunehouse in Marrickville (great team over there really know their VR's) , and I spotted this Very clean R35.  
    • Mate , I have the same issue right now with the exhaust noise , if you can tell me what your local guy did , I'll talk to my guys and see if they can do the same. Power is good but it just too loud when put it down. 
    • The other trick I've found with wrinkle black is to put the can in hot water for a bit to warm the paint up, and to pre-heat whatever you're painting. It'll be interesting to see if you pick up any power with the intake, following with interest. Got a proper lsd for this?
    • Plazmaman 76mm Pro Series, done. Data to back it up, I posted up somewhere here a few years back
×
×
  • Create New...