Jump to content
SAU Community

Recommended Posts

Selling a rear end setup for R33 GTS-t. This is a complete bolt in deal, all the modifications have already been done. Consisting of:

1/ New ATS 2 way GTR diff center: has all new bearings and seals. Has been modified to use existing GTS-t tailshaft, and all sensors.

2/ 4.36:1 gears

3/ GTR axles

4/ GTR hubs + backing plates

Can supply a cradle with the parts (either Hi-CAS or non-Hi-CAS). No brakes or rotors though.

Asking $1500 for the setup, the diff by itself cost more than that ($1300 for center, $550 for the bearings, plus mods, ring/pinion and assembly)

Also selling a set of new Mickey Thompson 275/60r15 tyres and custom rims to suit GTS-t. These are the largest tyres you can fit, and have been on cars as quick as 8.6. To fit these tyres you need the guards lipped the whole way around, and cannot have side skirts/fancy rear bar.

$750 for the two tyres and steel rims.

post-4735-1139706523.jpg

post-4735-1139706583.jpg

1/ New ATS 2 way GTR diff center: has all new bearings and seals. Has been modified to use existing GTS-t tailshaft, and all sensors.

2/ 4.36:1 gears

3/ GTR axles

4/ GTR hubs + backing plates

/touching-myself

:P

  • 3 years later...
Also selling a set of HKS Drag rear shocks for R33 GTS-t. Were rebuilt in Japan @ HKS, perfect condition. $500

hey are the HKS shocks still for sale?

i have money waiting if they are still

thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For something like this, I'd skip just going for the cheapest, I'd find the place with the best experiences people have had, especially for restoration work. Like everything, there is upholsterers, and then there is upholsterers. Some really great upholsterers for automotive restos won't even appear to have an online presence.   My guide would be find some of the old school classic cars that have been fully restored and are immaculate, and ask the people who own them who did the work on their seats
    • Might be tricky matching the seat trim material  If your got the funds you "may" want to get the rear re-trimed as well to match the front
    • How much is it to re-uploster?  Well that's a "how longs a piece of string?" question !  And I answer thusly: "twice half its length! " . . . . . .  Seriously you'll have to chase multiple quotes for that one from different uphlostrerereres !  Ask around, in your area and on the forums, chase reviews and most of all see the finished product in person cause photoshop is a wonderful thing !
    • Hey everyone!!  I've noticed that whenever I do my oil changes, after putting 4L in, the oil level sits at the top mark in the dipstick. This is after letting the old oil drain for a very long time too! I've checked the oil level daily for the past few mornings. It happens every time and it's confusing because all the threads say that it should take about 4.7L (With some just adding the full 5L) My next thought is to figure out if the dipstick I have is correct so could someone please tell me the length of the RB25DET engine oil dipstick?  I've checked images of some of the genuine dipsticks, but none of them have the length in it. https://justjap.com/products/genuine-nissan-engine-oil-level-dipstick-fits-nissan-r34-skyline-c34-stagea-c35-laurel-y34-cedric-gloria-rb25de-t-neo?currency=AUD&srsltid=AfmBOortQXofgmiHVRKuIaiKuygL4k0Ewp68c3isGZk0vvKOJ7Yqf3iB However.... the engraving on the genuine ones say 05002 while mine says AA000. This makes me believe that maybe I have a wrong dipstick? I just want to confirm before I buy a new one. The car is a fresh import from Japan so I don't have details of the previous owner to ask him. Thanks in advance 🙏🏾 
    • Sport. I didn’t rebleed it cause I just removed the slave and left connected.    I will change line and slave and see how it goes.  
×
×
  • Create New...