Jump to content
SAU Community

Recommended Posts

Just lately my r32 has been fluttering while i have my foot is on the accelerator. It does it when i go up hills and on the highway when i give it a bit. When it does it my boost gauge bounces between about 3 and 7 psi. Sometimes it does it when i hit 7 psi and sometimes it does it at about 2 psi.

Does anyone know what the problem is?

Link to comment
https://www.sau.com.au/forums/topic/105615-car-is-fluttering-on-acceleration/
Share on other sites

the fluttering indicates air going back through your turbo which normally happens on cars without BOVs when the trottle closes. Since you are experiencing this issue with the throttle open you must have a blockage in the piping after your turbo and before your trottle. My guess would be something in your intercooler???

I would be more inclined to check for a blocked fuel filter, fouled spark plug or dodgy coil pack before pulling the piping apart...how exactly does something large enough to block you intake get past the mesh on the AFM and then through the turbo without you knowing about it?

Are you willing to put money on it if you are so sure.

The best way to approach any problem is to start with the basics.

Check the fuel sysetm, then check the ignition system, then check the intake.

If you come up trumps...then start your in depth diagnosis like computer fault codes and other things like that.

Or you could just take the car to a qualified mechanic and he'll do it all for you.

thanks for the replies, ive checked the coils and plugs and they are fine, would i need a fuel pressure gauge to check if fuel was the problem?

plus what is compressor surge?

It does it almost all the time when i hit 7psi in 5th gear on the highway and it doesnt matter if im doing 2500rpm or 3500rpm, its always when it hits 7psi. Could it be wastegate flutter? I have a custom dump pipe.

When I say compressor surge I am refering to compressed air being pushed back through the turbo when the throttle is closed causing a fluttering sound as the air is "Chopped" up.

I was think that since this happens when the throttle is open that maybe whilst travelling up hill something in the intercooler is blocking the air flow.

I realise that this is a long shot as you should know if somthing was in the intake piping but...

I "HAD" this problem with a high flowed RB25 turbo ( T3/T4 internals ) that GCG made up for me. Used to build boost and then start rapidly choofing ( surging ). When I got it back off them after the 3rd time, I just sold it as opposed to trying it out again, purchased a genuine HKS GT25/35 and hey presto............. Problem solved !!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
    • Thanks Paul I reached out to Autotainment but they no longer work on JDM cars as the guy who used to do the work moved on and is no longer doing that kind of work. I am talking with Level Up Audio though.
×
×
  • Create New...