Jump to content
SAU Community

Recommended Posts

thanks for that guys, im looking at skylines at the moment, though im just sorting through all the shit cars, there are so many dogs out there. Trying to find one half decent b4 i look seriously at it. will def pm/ring when im going to look into more detail at the car!

Cheers, Tyson

Link to comment
https://www.sau.com.au/forums/topic/105732-32-help/#findComment-1953395
Share on other sites

Check the undercarriage for dodgies.. be careful of ones where the paint looks *too* good, as a cheap job may look good now, but in 6-12 months start bubbling up as more than likely it will be a cheap job (some dealers nearly respray all stock). It will be near 15 years old, not many cars have immaculate paint jobs by then.

Otherwise just take it for a drive, check for clunks, floaty steering, make sure the brakes pull it up well. Check for crunches in the gearbox, clutch engages freely, even tyre wear, and oil leaks, particularly under the engine (rb20's love to leak when old - and usually its a bitch to fix).

Oh, pull off some of the intercooler piping (or AFM), and check for accessive oil in there. If there is any more than a tiny amount, definitely don't buy it.

Link to comment
https://www.sau.com.au/forums/topic/105732-32-help/#findComment-1954442
Share on other sites

You can check that pipe.. or main intake pipe that goes to manifold.. Basically if there is a *lot* of oil in there (as in you can see it dripping off your fingers), there is oil from the sump blowing past the piston rings during each combustion stroke. Meaning the piston rings are worn.

This pretty much means there isn't too much life left in the motor as it'll only get worse and worse until something gives way.

It can also mean that the turbo is going, letting oil into the system -- again whilst not as bad as piston rings, probably not a great thing.

Anyhow, that is my explanation... :)

Link to comment
https://www.sau.com.au/forums/topic/105732-32-help/#findComment-1959522
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The water pump is know to leak as well. So if the coolant is low checking that first as well as hoses. 
    • Reading your posts Josh, sometimes I feel like I've gone in a time machine back to the 90's when everyone was doe-eyed and figuring things out for the first time.  I've lost track of how many single turbo GTR's I've seen on track that haven't burnt down lol. Everything has been figured out a long time ago. These things are at the point now where its essentially turn-key to go single turbo. 
    • Among other things yes. Making sure to either use an oil pressure regulator or the right restrictor size for your oil pump/range of oil viscosities you intend to run, making sure you plumb the lines correctly, turbo should be placed such that it siphons properly even when the water pump isn't turning so you don't boil coolant in the turbo after shutdown, oil return should be low resistance and also preferably picking the one that is most likely to return to the pickup as opposed to some other irrelevant part of the pan. It's far from impossible to figure this out but I have seen people really, really struggle and if that's the case it's easier to just take the path of least resistance. To me, bolt-on twin turbos are a fixed cost whereas single turbo is almost unbounded.
    • Latest round of updates on the car. I purchased and installed a SWS clutch slipper to help with 60ft times and got some second-hand good condition 275/40R17 Hoosier DR2 radials. Test and tune in November showed the tyres were an upgrade over my over 15 year old mickey Thompson's and I got a 1.8 second 60ft and pb et of 11.71 but even then, that run wasn't great due to rain and driver error (the event got called off 10 minutes later fast forward to the weekend just gone 25th of Jan and there was finally a break in the weather to let racing happen. The first run the track was slippery and only managed a 12.1@129 Second run the track was better and got a new pb et and mph: 11.54@131   Lith and I then worked out that I installed the previously mentioned clutch slipper incorrectly and its never been working, and I had just been dumping the clutch the entire time, we also noticed it was on street boost and not race boost. So I lined up for a third run with the car turned up in the first two gears, but the passengers side axle objected to clutch dumps and left the chat which stopped my weekend.   so there will be another attempt in the future once I replace the tyres as they rubbed and are stuffed now. but a low 11 should be on the cards.
    • Ceramic coating and heat shielding, you mean?
×
×
  • Create New...