Jump to content
SAU Community

Recommended Posts

Seeing if any of you have had this problem before. I found on my R34 that the windows were not sliding up evenly. A friend of mine said that all it was was the rubber guides drying out and that I should spray a little silicon spray on the tracks and the top guide.

I did this, but now there is Silicon spray smeared all over the inside (tinted) and outside of the glass, as it has also soaked into the bit at the bottom that cleans the water from the windows.

HOW do I get smear free windows again? What can I use to clean it?? :P

Any help appreciated.

Link to comment
https://www.sau.com.au/forums/topic/105746-help-with-silicon-spray/
Share on other sites

Yeah, the window runs like brand new again. The drive motor sounds like it is running much smoother now too.

I have also been told metho will clean it up, so I will give it that a shot too.

Cheers

get some window cleaning spray, should take it right off, or try some turps,

did it fix the window problem though?

Sounds like you sprayed too much on.  Do you think?

Yeah, very easy to get carried away when you are trying to get the window to wind up smoothly again.

as long as this dosn't remove the tint!

I spoke with a Tint friend of mine and he said metho is fine as it doesn't contain a certain chemical that Windex Window Cleaner has. He said never to use window cleaner as it has this chemical (I forget the name) that will kill your tint sooner or later.

na, a few times might not kill the tint,, but it will damage it over time, and bye bye tint waranty,,,

just make sure u don't use on the inside of the windows (where the tint is)

the rest of ur car probably has factory tinted glass ya? cleaning them with windex isn't a problem,,

i think its ammonia or something like that , makes the tint go that gross purple colour,,

Afro, you never seem to amaze me with your wealth of knowledge!!!!

Ammonia....that's it. Nice to hear from you again!!! :P

It will only send the old style tint purple. It used a vegetable dye in its formulation as opposed to metalic particles used in current window tints. If it turns it purple - its going to go purple all by itself from sun exposure. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...