Jump to content
SAU Community

Recommended Posts

I have about 20 tyres in my backyard i need to get rid of them the olds r oding. So here guys pick up a bargin

sizes from 205 to 225

in profile from 45 to 60

percentage of tread from 40 - 90

As for the price what ever you offer for the tyre or the tyres or the lot?? cheers

if u want some of them or the lot come down have a look take a pick and we can take it from there.

I am located in niddrie in melbourne pm me thanks regards robert

Edited by SXC_R33
Link to comment
https://www.sau.com.au/forums/topic/105816-fs-tyres-16-inch/
Share on other sites

pity ya in melbourne.... im in adelaide and are in need of some.....oh well

yeh nothing we can do about dat only frienth them over but prob not worth it thanks

............................

GUYS THEY NEEDTO BE SOLD....?????

Edited by SXC_R33

How about you list the tyres individually, stating: width and profile, tread and brand/model of tyre. I know it's a bit of work but I'm personally not willing to travel to your place to find that there's nothing that I want.

i have pairs and singles in the following sizes and all tyres are prices to clear at u gimme an offer so here it is

205 50 16s

205 55 16s

205 60 16s

215 55 16s

215 60 16s

225 50 16s

225 55 16s

225 60 16s

235 55 16s <----- i think have to recheck

all the brands are bridestone dunlop good year continental

Edited by SXC_R33
i have pairs and singles in the following sizes and all tyres are prices to clear at u gimme an offer so here it is

205 50 16s

205 55 16s

205 60 16s

215 55 16s

215 60 16s

225 50 16s

225 55 16s

225 60 16s

235 55 16s <----- i think have to recheck

all the brands are bridestone dunlop good year continental

thanks. i'm interested in a pair of 225/50/16 and a pair of 205/55/16. I'd like to know the tread and brand/model of tyres you have available in these sizes.

thanks

greg

225/50/16 brigstone turanzas and also dunlop and continetals

205 55 16 heave heaps of them and in michelins dunlops bridstones and continentals

have about 65- 90 percentdepends on which ones u want

thanks. i'm interested in a pair of 225/50/16 and a pair of 205/55/16. I'd like to know the tread and brand/model of tyres you have available in these sizes.

thanks

greg

Edited by SXC_R33

I'll keep you in mind. I'm looking for some cheap 16" rims and 2nd hand tyres for motorkhana days. Just killed my 17" tyres. Bit expensive to replace. Do you have any 17" tyres?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So been ocd with timing mark but checked from few angle and seems both cam are on and crank is matching as well to the slot on sump and crank pully   i noticed crankshaft cover has been robbed as per attached pic. Any ideas why? Could my balancer or harmonic be on its way out? should I replace the cover? https://ibb.co/ZR1JFYRR
    • So now doing the change and first time dealing with rb so little nervous giving engine power and potential for screwing it up When you align all marks and then remove crank bolt, timing move little I assume you can put the bolt back in once you have removed the pully to get timing to where you want?   here is pic of my both intake and exchust cam aligned, depending on angle you look they seem to be either aligned or a half tooth or so out. Any thoughts? Should you angle your face and look at each mark that way as if looking straight rather than from above as it can be misleading   <a href="https://ibb.co/ZpnhcvbF"><img src="https://i.ibb.co/HfWrGR9b/IMG-4447.jpg" alt="IMG-4447" border="0"></a> <a href="https://ibb.co/4wm2wn4q"><img src="https://i.ibb.co/JWBqWwr1/IMG-4445.jpg" alt="IMG-4445" border="0"></a>   https://ibb.co/ZpnhcvbF https://ibb.co/4wm2wn4q
    • Thanks for the reply @GTSBoy Haven't really thought of that yet, but you are right. If the hose was damaged it should be absolutely pissing by now. I'll put some heat sleeve around it for good measure since I'm already removing the line anyway.  Maybe I'll put on some of the stock hardlines if I ever fully remove the turbos again. Maybe when T51R modding the compressor housings? Might be a fun mod on GT28s for that "fake single turbo" effect.
    • Update 1: I did some work on the car already before finalizing this post and my "issues" list. I dropped the Tomei exhaust in favor of the HKS Hi Power Silent. Sounds nice and I can actually hear myself think now. Also gives me a realistic chance to legally drive without silencer inserts. A bit of cheating was necessary to still be able to mount the Top Secret style diffuser. Some malusage of washers and a bit of "convincing" toward the brackets and exhaust hanger seemed to do the trick. The shaky steering wheel has been resolved as various suspension components were worn, like sway bar bushings and link bars. Most notably the two steering tie rod ends. Had some trouble finding bushings because my sway bars are not OEM thickness, 23.x up front and 27 rear. But non adjustable, so no aftermarket I suppose. Maybe they are nismo units? Turbo oil drain hoses were definitely still the originals and are new now. Wasn't the cause of the turbo oil leak sadly. Currently removing the rear turbo because of it, I suspect the braided oil feed line is the culprit. This issue needs to be dealt with so I can work towards actually getting the turbo setup legal and inspected. Two new issues to add to the list as well. Rear Main seal is probably leaking. Time will show how bad it is, I don't really want to drop the gearbox right now just for the stupid seal. Could fix a few other things in one go once I do that. Front right driveshaft grease is going past the cv boot, so at some point I'll fix that too.
    • Ok so no 4cyl clutch... Yeah it is a factory manual. So if iam correct i need clutch and flywheel too? I can use something that suits something like R32 GTST?   EDIT: https://www.ebay.com/itm/224291042776 Is this ok?   EDIT2: i maybe forget to mention this(dk how important it is) but the trans will be behind RB25DET NEO(iam doing swap) It will be there for a little while. Iam planing to do bigbox or BMW tranny..
×
×
  • Create New...